"LABCONCO"

Supplier: LABCONCO

Accessory for Freeze Dryer

Supplier: LABCONCO

Accessories for CentriVap™ Pro Vacuum Concentrators

Supplier: LABCONCO

Evaporator, centrifugal, Glassware cap, PE, for 600 ml tubes

Supplier: LABCONCO

Accessory for Freeze Dryer, Lyph-Seal™ tray dryer 230 V, EU, W×D×H: 39,6×48,8×45,5 mm, 62,6 kg

Supplier: LABCONCO

Replacement prefilter, pleated paper. MERV 8 rating, 0,5 kg, 452×376×20,3 mm

Supplier: LABCONCO

Evaporator, centrifugal, Vacuum tubing kit, two each 12,7 mm ID vacuum tubing (122 cm length) and 4 tubing clamps

Supplier: LABCONCO

Solid epoxy work surface, flat, no cupsink cutout, for 30 inch width laboratory hoods, 760×760×30 mm, 39 kg

Supplier: LABCONCO

End-Zone™ provides an alternative to visual inspection making it easy to determine when freeze drying is complete.

Supplier: LABCONCO

Adjustable base stand, telescoping, with casters 6' models

Supplier: LABCONCO

The FreeZone® bulk and stoppering tray dryers have a stainless steel interior and epoxy coated, stainless steel exterior. Units include three probes for monitoring sample and shelf temperature. Microprocessor controlled temperature programming from −40 to +40 °C during ramping and holding in stoppering tray dryers, whereas in bulk dryers a microprocessor maintains the system temperature within 3 °C of the set point (maximum 60 °C). Units have an LCD display and audible/visual alarm indication for temperature and vacuum changes.

Supplier: LABCONCO

Accessory for freeze dryer, Heated chamber with ¹/₂" thick, clear acrylic cover, 229×267 mm, 230 V, for Freezone® 4.5A, 4.5P, 6, 12 and 18

Supplier: LABCONCO

Racks and supports hold test tubes, flasks and microwell plates for pre-freezing and freeze drying samples; clear canister holds chemical traps.

Supplier: LABCONCO

Accessory for Freeze Dryer, 28-Port two tier manifold, 304 stainless steel with twenty eight neoprene valves and latching pin, accomodates both 1/2” and 3/4” adapters, 617×269×465 mm

Supplier: LABCONCO

Pressure relief valve vent kit for exhaustig the pressure relief valve during overpressurization, incl. 3,9" OD × 3,8" ID thimble connection, gasket, two elbows, four clamps and 13" long tubing (Ductwork for outside venting and 5230600 Pressure Relief Valve are required but not included)

Supplier: LABCONCO

Purifier®, 4' Telescoping base stand with leveling feet and non-welded shelf

Supplier: LABCONCO

Bag 6ft 1 * 1 items