1172 Results for: "Industrial Physics"

Supplier: Industrial Physics

Clamp-type probes to measure object temperature (480 °C).

Supplier: Industrial Physics

Accessory for coating tester, For: Surface profile and coating thickness gauge, Spare leather pouch

Supplier: Industrial Physics

The TQC Cross Cut adhesion test kit (Master Paint Plate) is a stainless steel measuring tool that features: a 1, 1,5, 2 and 3 mm cross cut adhesion test according NEN-EN-ISO 2409:2003 and ASTM D 3359 (X-cut) Andreas cross.

Supplier: Industrial Physics

Hammer used to test the quality of concrete, as well as other construction materials, for analysing resistance.

Supplier: Industrial Physics

Durometers for measuring impression hardness of soft materials.

Supplier: Industrial Physics

Electronic coating gauges use magnetic and eddy current principles to measure coating thickness on both ferrous and non-ferrous metals with all PosiTector 6000, 200, DPM, UTG, RTR and SPG probes.

Supplier: Industrial Physics

mini LIGNO duo is a wood moisture meter that provides four different base-wood groups, eight building materials, such as gypsum or screed.

Supplier: Industrial Physics

Cylindrical film applicator with four application sides for applying paint films of four different predefined thicknesses in film width 60 or 80 mm. Suitable for applying a host of different products onto flat and relatively solid substrates. Made from high grade stainless steel, the film applicator will not be affected by acid or base elements.

Supplier: Industrial Physics

profi LIGNO are moisture meters specifically designed for wood and building materials such as screed or gypsum.

Supplier: Industrial Physics

mini LIGNO classic+ is a wood moisture meter that provide four wood groups and 16 single species of wood.

Supplier: Industrial Physics

Plasticine for Karsten tube penetration test, 250 g

Supplier: Industrial Physics

Bird-type film applicators feature one flat edge and one application side for applying a pre-defined coating thickness. Bird-type applicator single gap is available in film width 50 and 75 mm and can be customised for applying a host of different products onto flat and relatively solid substrates. All Bird-type film applicators are made from high grade stainless steel and are not affected by acid or base elements.

Supplier: Industrial Physics

RAL 840-HR are the basic collection for matt colour shades and RAL 841-GL for glossy colour shades. Contains safety and signalling colours with the colour requirements of DIN regulations.

Supplier: Industrial Physics

Combination gauge equipped with two different tips: Sharp needle for surface roughness and round tip for coating thickness.

Supplier: Industrial Physics

These coated metal calibration standards consist of a set of four calibration plates.

Supplier: Industrial Physics

The PosiTest DFT measure coatings on all metals - The DFT Fe measures non-magnetic coatings on steel while the DFT Combo measures both non magnetic coatings on steel and non conductive coatings on aluminum and brass.

Supplier: Industrial Physics

Weight set, 4 kg, for Durometer shore D, For: Durometers shore

Supplier: Industrial Physics

Plastic (or aluminium) thickness combs to be used as a record of wet film thickness measurements, in 30 steps.

Supplier: Industrial Physics

Lory viscosity cup designed for quick measurements on location or during production processes.

Supplier: Industrial Physics

Test panels are used to enhance reproducibility of physical and chemical tests. Each panel is equipped with a hole for hanging and handling.

Supplier: Industrial Physics

This automatic adhesion tester measures the adhesion of coatings applied on metal, wood, concrete and similar substrates.

Supplier: Industrial Physics

Spare knife, round, 1 mm, acc. to ISO 2409 & ASTM D3359, suitable for C1000 test kits

Supplier: Industrial Physics

Simple hand-held digital thermo/hygrometer.

Supplier: Industrial Physics

This digital tachometer is designed to be used for both contact and non-contact measurements.

Supplier: Industrial Physics

The Automatic Film Applicator Standard provides a reliable basis to apply coating films to test charts, panels or foils in a uniform and reproducible way in order to eliminate variations caused by human factors.

Supplier: Industrial Physics

Dip cups can be used to provide a quick 'break-thread' flow time comparative measurements on site in a manufacturing environment.

Supplier: Industrial Physics

SSPC-VIS 2 pictorial provides a method of evaluating degree of rusting on painted steel surfaces.

Supplier: Industrial Physics

Accessory for coating tester, Water resistant marker

Supplier: Industrial Physics

This apparatus is designed to detect of coating porosity in dielectric (insulation type) coatings on conductive substrates, including concrete.

Supplier: Industrial Physics

This high precision destructive hygrometer is designed for applications in concrete, sand cement, and other construction materials. The water present in the sample chemically reacts with calcium carbide produces pressure in the vessel, which is proportional to the residual moisture content.