36656 Results for: "Hood C Monashee"

Supplier: VWR Collection

Disposable non-woven hood is made of 20 gsm SPP fabric, and features a small open face hole.

Supplier: ERLAB CAPTAIRE

Accessory for ductless fume hood, Front panel

Supplier: KOETTERMANN

LEV arm for wall mounting, pipe Ø: 75 mm, aluminium, elox, with transparent PETG round hood and wall bracket, For: Fume hoods

Supplier: ERLAB CAPTAIRE

Filter GF4/F

Supplier: Heidolph Instruments GmbH & Co.KG

Flat hood

Supplier: ERLAB CAPTAIRE

Replacement filter for Captair® hoods, F4PF10, For: -

Supplier: LABCONCO

SpillStopper™ work surface, right rear cupsink cutout, 1829×762×32 mm, 93 kg, For: Laboratory Hoods, Protector®

Supplier: ERLAB CAPTAIRE

Two plastic hinges

Supplier: KOETTERMANN

The pharmacy hood is a small hood, which was developed especially for the handling of hazardous substances in pharmacies. It complies with the requirements of section 4 (2) of the German Pharmacies Act and is ideally suited for handling dusty compounds or volatile chemicals. These hoods have been designed for safe handling of chemicals, mineral acids, concentrated and heated acids.

Supplier: Avantor Fluid Handling

Place where convenient—ideal for limited spaces, hoods, or isolation chambers.

Supplier: ILC DOVER

The Sentinel XT® Clear Full Hood is a superior solution for protection in the pharmaceutical industry when compared to other PAPR masks and facepieces.

Supplier: LABCONCO

Adjustable base stand, telescoping, with casters 6' models

Supplier: VWR Collection

These flat hoods are made from Protect Xtra fabric which is a further development of the Protect fabric consisting of 100% polyester weave with conductive yarn (warp). This fabric has been especially designed for use in critical areas (e.g. operating rooms, sterile environments). Thanks to the PTFE finish, the hoods provide very good splash protection against liquids and other contamination. The fabric has good tensile strength and provides very good resistance to microbial penetration.

Supplier: 3M

Hoods, Replacement hood, Hoods, Versaflo™, White

Supplier: THARMAC GmbH

Charcoal filter for fume hoods, Cellstain®

Supplier: VWR Collection

These poypropylene head and face covers are designed to protect users from potential environmental contaminations.

Supplier: THARMAC GmbH

Fume hood with activated charcoal filter, Cellstain®

Supplier: ILC DOVER

Sentinel XE® PAPR (powered air-purifying respirator) with unique clear hood is specifically designed to delivery TH3 level protection to pharmaceutical and biopharmaceutical workers.

Supplier: 3M

The Versaflo™ Peel-Off Visor Cover for Premium Hoods is a transparent peel-off visor cover designed for use with Versaflo™ Series S-600, S-700, and S-800 premium head covers and hoods.

Supplier: VWR Collection

This flat hood is made from Quantus® Comfort fabric which is a high quality polyester fabric (100% polyester weave with conductive yarn) designed for critical cleanroom applications. The fabric provides a very high wearing comfort and at the same time a great barrier against particles (98% for airborne particles >0,3 μm).

Supplier: Avantor Fluid Handling

Place where convenient—ideal for limited spaces, hoods, or isolation chambers.

Supplier: Palbam

Stainless steel 304, electropolished finish wall-mounted dispenser for plastic wrapped gowns and hoods.

Supplier: VWR Collection

These disposable overalls, with hood, are made from non woven PE-laminated, PP fabric.

Supplier: LABCONCO

Guardian™ 115 V, 60 Hz : 1000 digital airflow monitor for protector XVS and demonstration hood, For: —

Supplier: VWR Collection

These disposable hoods, with 2 ply face mask, are made from a non woven, spunbonded polypropylene (SPP) fabric, which protects against dirt, grime, and certain dry particulates, in non hazardous environments.

Supplier: VWR Collection

This sterile protective hood is made from breathable SMS fabric. The integrated face mask is manufactured from a combination of melt-blown and spunbonded PP.

Supplier: VWR Collection

This single-use garment set includes overall, hood, boot covers and sleeve protectors, all made from breathable SMS fabric.

Supplier: LABCONCO

Ductless ventilation systems with glass tops and sides and low profiles are well suited for educational settings. Clean-Sweep air foil and zone-perforated rear baffle maximise containment.

Supplier: LABCONCO

Self-contained ductless enclosures allow safe handling of organic, formaldehyde, acid gas, sulphur compounds, or ammonia chemical fumes and vapours, as well as particulates. Air inside the enclosures passes through carbon filters, and in some cases additional HEPA particulate filters, before being safely exhausted back into the laboratory. No outside ducting is required.

Supplier: ERLAB CAPTAIRE

The new Captair® Smart ductless filtering hoods are designed with a simple and innovative way of communication. Smart Technology, simple and intuitive communication by light indicates the status of the hood. A simple light pattern will indicate if the airflow is compromised, if there is a fan failure or in case of a filter breakthrough.
Please complete the quote request to enable us to assist you in finding the right unit for your application.
https://uk.cmd2.vwr.com/bin/public/fc/main?f=Y5&pimid=17327608