1151 Results for: "Dow+Corning+Silastic+S"

Supplier: DOW CORNING

High strength silicone moldmaking rubber.

Supplier: Merck

Octamethylcyclotetrasiloxane for synthesis, Sigma-Aldrich®

Supplier: Thermo Fisher Scientific

Decamethylcyclopentasiloxane 97%

Supplier: Thermo Fisher Scientific

Octamethylcyclotetrasiloxane ≥98%

Supplier: TCI

Decamethylcyclopentasiloxane ≥99.0% (by GC)

Supplier: Avantor Fluid Handling

Platinum-cured silicone tubing with a very low extractable profile.

Supplier: Thermo Fisher Scientific

High-vacuum grease is used as an anti-seize grease in ground glass joints and to lubricate synthetic and silicone rubber gaskets. Also used to lubricate water-treating equipment, laboratory equipment, lubricate O-rings on binoculars and telescopes and to prevent fogging of delicate lenses.

Supplier: Thermo Fisher Scientific

Octamethylcyclotetrasiloxane 98%

Supplier: Thermo Fisher Scientific

Decamethylcyclopentasiloxane ≥97%

Supplier: TCI

Octamethylcyclotetrasiloxane ≥98.0% (by GC)

Supplier: Avantor Fluid Handling

Pharma tubing remains flexible and resilient for long service life.

Supplier: Avantor Fluid Handling

Pharma tubing remains flexible and resilient for long service life.

Supplier: DOW CORNING

Transparent straw colour resin of 75% silicone in toluene, providing a tack free, protective, thin film coating in 15 minutes at room temperature.

Supplier: TCI

Octamethyltrisiloxane ≥98.0% (by GC)

Supplier: GREEFF RW SILICONES LUBRICAN

General-purpose acetoxy RTV sealant. Meets the requirements of 21 CFR Section 177.2600: "Rubber articles intended for repeated use".

Supplier: GREEFF RW SILICONES LUBRICAN

Non-flowing adhesive, high tensile strength and elongation, enhanced thermal stability, MIL-A-46146

Supplier: DOW CORNING

Grey translucent silicone compound

Supplier: GREEFF RW SILICONES LUBRICAN

Dow Corning silicone 10:1 encapsulants for electronics are supplied in two parts as lot-matched base and curing agent that are mixed in a ratio of 10 parts base to one part curing agent, by weight.

Supplier: DOW CORNING

Clear low volatility fluorosilicone especially suitable for foam control in chlorinated solvents

Supplier: DOW CORNING

Dow Corning® 3-4241 Dielectric Tough Gel Clear-Green is a two component, heat curing, silicone gel that is used for electrical insulation and protecting electrical components from contaminants, moisture, and stress.

Supplier: DOW CORNING

Clear methylhydrogenpolysiloxane fluid

Supplier: DOW CORNING

This silicone-based clear translucent grey coloured compound is used as sealant and lubricant for vacuum systems.

Supplier: DOW CORNING

A range of silicone fluids recommended for use in baths. Low in toxicity, inert and long lasting due to their low volatility.

Supplier: DOW CORNING

Light grey, translucent, non melting silicone. Serviceable from –40 to +260 °C.

Supplier: Serva

Straw coloured polyophenylmethyldimethylsiloxane

Supplier: DOW CORNING

Sodium chloride

Supplier: DOW CORNING

Water-dilutable nonionic emulsion containing 30% Simethicone USP by weight.

Supplier: DOW CORNING

Dow silicone 10 to 1 encapsulants are supplied as two-part liquid component kits. When liquid components are thoroughly mixed, the mixture cures to a flexible elastomer, which is well suited for the protection of electrical/PCB system assembly applications. Dow silicone encapsulants cure without exotherm at a constant rate regardless of sectional thickness or degree of confinement.

Supplier: DOW CORNING

A grease-like silicone material, thickened with heat conductive metal oxides.

Supplier: DOW CORNING

Lubrication for control and pressure plug valves, water softener and faucet valves. Sealant for vacuum and pressure systems and outdoor equipment (also shipboard) subject to washing and harsh environmental exposure, such as meters, electrical service entrance and underground connections.