"Desco"

Supplier: DESCO

Transparent metal-in static shielding bag provides a static safe environment for ESD sensitive electronic devices (ESDS).

Supplier: DESCO

MagSnap 360™ dual-wire metal wristband creates a superior electrical connection to eliminate intermittent failures.

Supplier: DESCO

The MagSnap® 360™ dual wire coil cord offers a 360° rotation and magnetic connection between the wristband and coil cord.

Supplier: DESCO

Storage Bag, Metal-In shielding bubble bags with 50 mm flap, Dimensions: 150×255 mm

Supplier: DESCO

Statguard® Static Dissipative Cross-Linked Floor Finish is used to dissipate static charges as well as prevent triboelectric (static charge generation) charges while providing a clear, high gloss finish that resists wear. It meets EN 61340-5-1 ESD Floors Table 1 RG less than or equal to 1x10E9 ohms.

Supplier: DESCO

Coil cord with 2,5 mm polyurethane insulation, conductor is high strength 7-end duplex tinsel for strength and flexibility.

Supplier: DESCO

These plugs to fit UK European CEE (7) VII Schuko sockets as used in Belgium, France, Germany, Holland, Spain. The Europe Earth Bonding Point (EBP) plug is designed to provide a common ground point for grounding using protective earth in an ESD protected area (EPA). The plug fits into the mains supply socket, making a connection with the earth conductor only. In place of the live and neutral pins are moulded insulating plastic pins to allow positive location in the socket. Connectors on the front of the plug are available for connection via ground cords to the various elements of the EPA. Thus each element is held at a common potential.

Supplier: DESCO

The EBP bar should be fixed to the edge of a bench or other suitable work equipment within reach and accessible to all connecting ground cords, but where it is unlikely to be knocked and damaged or hinder the operator.

Supplier: DESCO

The Desco Europe Slim Earth Bonding Point Bar (or Common Ground Point) has been designed to be installed underneath bench tops where it will be accessible to all connecting ground cords and where it is unlikely to be knocked and damaged or hinder the operator.

Supplier: DESCO

This provides a storage terminal for the wrist cord when the workstation is unoccupied.

Supplier: DESCO

Brushes minimise static charge generation and remove electrostatic charges to ground when held by grounded personnel.

Supplier: DESCO

Daisy-chains two worksurface mats for the monitoring of two workstations with the 724 workstation monitor.

Supplier: DESCO

This conductive waste bin is useful in large ESD protected areas where waste accumulates and cannot be conveniently removed except in bulk.

Supplier: DESCO

Desco Europe Rigid Conductive Boxes are marked with the ESD protective symbol. Boxes can be supplied with or without high density foam for insertion of component leads or low density foam which acts as a cushioning material.

Supplier: DESCO

Reztore® Surface and mat cleaners removes dust, grease, grime, fingerprints, solder flux and other contaminants from ESD mats and other surfaces.

Supplier: DESCO

These grounders will not mark shoes or floors - reducing maintenance costs of touching up on floors. Size adjustable material expands to fit most shoe sizes comfortably and flex during walking.