1190 Results for: "Bohlender"

Supplier: Bohlender

Screw cap with handy knurl, made of PTFE.

Supplier: Bohlender

Two-part quick connector is made of PFA, with two GL threads. When disconnected, the flow is interrupted by means of built-in non-return valves.

Supplier: Bohlender

These transparent acrylic cabinets have solid 25 mm thick walls, a circular silicone seal and a vacuum gauge (0 to 760 mm of mercury).

Supplier: Bohlender

PEEK.

Supplier: Bohlender

PTFE, white.

Supplier: Bohlender

Stirrer shafts made of PTFE-jacketed stainless steel and the propeller completely made of PTFE.

Supplier: Bohlender

PTFE, white. For connecting tubes or tubing to vessels with ground joint. For inserting and fixing probes, thermometers, dip tubes or cables.

Supplier: Bohlender

Base, upper head connections and frit made from PTFE, column body, riser, inlet and outlet tubes made from FEP.

Supplier: Bohlender

Evaporating dishes are made of PTFE.

Supplier: Bohlender

PPS screw cap and PTFE body.

Supplier: Bohlender

Made of PTFE, white

Supplier: Bohlender

Assortment of remainder tubing, BOLA

Supplier: Bohlender

Filter body made of PE with connection thread for direct installation on barrels. Lid with aeration openings and label field to monitor service life. Filling made of activated carbon for adsorption of solvents.

Supplier: Bohlender

Adaptor for installation of capillaries with b.safe fittings at the exhaust filter connection of the b.safe waste caps.

Supplier: Bohlender

Flexible tube tag to stick on capillaries and tubes with Ext.Ø 0,4 to 6,35 mm, assorted colours (5 colours per pack).

Supplier: Bohlender

Insert with screw-in thread for barrels or screw cap for canisters. With integrated level indicator to monitor the liquid level during filling as well as a neck with GL 45 thread for the assembly of a b.safe funnel with GL 45 thread.

Supplier: Bohlender

Laboratory flask made of Borosilicate glass including screw cap and spout made of PP.

Supplier: Bohlender

Funnel made of PE / static dissipative PE-EX for liquid waste disposal. The funnel can be safely mounted on the waste container with its freely turnable cap that is safely fixed with the filling neck.

Supplier: Bohlender

Excellent electric conductivity due to a special 'antistatic compound' made of pure PTFE and finest, highly pure carbon dust (less than 2,5%). Colour: black.

Supplier: Bohlender

T-shaped connector made of static dissipative PE-EX.

Supplier: Bohlender

Pipe clamp made of PE with permanently fixed power magnets. b.safe Waste Pipes can easily be clipped into the pipe clamp for tube Ext.Ø 32 mm.

Supplier: Bohlender

b.safe waste tubes can be connected to the canister by means of these b.safe system waste caps and solvents can be collected safely. To avoid spill over of canisters through the connection of a Waste Cap to a b.safe Display for electronic level control. The filling levels of waste containers in laboratory cupboards and workbenches can be reliably monitored. With the use of b.safe Waste Tubes, solvent waste is led directly into the canister, solvent vapours are held back by the exhaust filter with activated carbon or can be led to the hood by means of a venting hose.

Supplier: Bohlender

Stirrer shafts made of PTFE-jacketed stainless steel with the stirring unit made completely of PTFE.

Supplier: Bohlender

Body made of PTFE with 2 connections. Nuts made of glass-fibre reinforced PTFE for connecting tubing or tube.

Supplier: Bohlender

Very good electric conductivity due to a special 'anti-static compound' made of pure PTFE and highly pure carbon dust (less than 2,5%).

Supplier: Bohlender

Gasket, made of PTFE/Silicone, for tubing, tubes or probes inserted through Torion threads.

Supplier: Bohlender

Screw caps made of PP, with handy knurl. Sealing insert made of PTFE with elastic sealing lip and an o-ring for balancing unevenness on the bottle neck.

Supplier: Bohlender

PTFE, white.

Supplier: Bohlender

Spherical ground joint sleeves, made of PTFE, with gripping rings and sealing rings on the outside; seal suitable for high vacuums. Robust design for regular use.

Supplier: Bohlender

PTFE/Silicone.