1073 Results for: "Bel-Art Products, a Part of SP"

Supplier: Bel-Art Products, a Part of SP

PP, translucent

Supplier: Bel-Art Products, a Part of SP

Stirrer blade made of PTFE. Fits all standard button-tip stirring shafts.

Supplier: Bel-Art Products, a Part of SP

These mercury free thermometers are individually calibrated at specified points.

Supplier: Bel-Art Products, a Part of SP

Desiccator cabinet, Door seal for desiccator

Supplier: Bel-Art Products, a Part of SP

PE, with black phenolic screw cap.

Supplier: Bel-Art Products, a Part of SP

Easy-to-see, bright red funnel designed for delivering liquids into hard-to-reach areas with minimal mess and effort with anti-slop inward flange and large, strong handle.

Supplier: Bel-Art Products, a Part of SP

Desiccator, Plastic, Replacement plate for 467-2232 and 467-2233

Supplier: Bel-Art Products, a Part of SP

These splash shields are designed to provide safety, comfort, flexibility and quality in a design that will adapt to your specific needs.

Supplier: Bel-Art Products, a Part of SP

Fixed table bracket, screw attached to bench top, for safety splash shields, For: Bel-Art splash shields

Supplier: Bel-Art Products, a Part of SP

Complete fitting assortment box with connectors for tubings.

Supplier: Bel-Art Products, a Part of SP

These PP plates are compatible with standard robotic work stations, such as Zymark, Tecan, Hamilton, Rosys and Beckman. To side load a Beckman BioMek® system, use side-loader collars. 2 ml deep wells permit serial dilution protocols unlike with standard microtitre plates.

Supplier: Bel-Art Products, a Part of SP

Storage boxes, lead lined polyethylene, suitable for storing vials of isotopes, contaminated instruments and tools, radioactive samples, solutions, or waste.

Supplier: Bel-Art Products, a Part of SP

PP, autoclavable.

Supplier: Bel-Art Products, a Part of SP

Three zone powder samplers.

Supplier: Bel-Art Products, a Part of SP

Flow indicator with polypropylene non returning valve.

Supplier: Bel-Art Products, a Part of SP

Provides an efficient method of preparing subsamples of collected water-sediment mixtures from stream flows for water quality analysis.

Supplier: Bel-Art Products, a Part of SP

PP, translucent, tall form, with handle.

Supplier: Bel-Art Products, a Part of SP

Stainless steel, with or without PTFE coating. These trough-style balance spoons enable aasily transfer small quantities of materials.

Supplier: Bel-Art Products, a Part of SP

This pipette tray made of PS can be used in drawers or on the benchtop for storing pipettes and can also be used for soaking pipettes before cleaning.

Supplier: Bel-Art Products, a Part of SP

Placed and centered on a magnetic stirrer, this platform operates as an orbital vibrator for plates, flasks or other vessels.

Supplier: Bel-Art Products, a Part of SP

Measure internal and external dimensions with high precision. Upper scale is 150 mm with 0,1 mm subdivisions, lower scale is 6" with 0,005" subdivisions. Precise measurements can be made with the fine adjustment thumb roller, and reading scales create no parallax.

Supplier: Bel-Art Products, a Part of SP

Designed for one hand label making, the dispenser comes with a weighted bottom with non-skid pads to avoid sliding or lifting. The epoxy-coated steel platform has a jagged edge and finger holes for releasing the label tape. The writing platform accommodates left and right-handed users. Dispenser accepts any tape with a 7,6 cm core and maximum OD of 133 mm. Ideal for use with Write-On™ Label Tape. Dimensions: 213× 87×95 mm, platform: 102×152 mm, shipping weight: 1,8 kg.

Supplier: Bel-Art Products, a Part of SP

PE bottle threads on to end of rod to collect samples. Safely distances user from dangerous chemicals.

Supplier: Bel-Art Products, a Part of SP

Ideal for marking various films that are to be X-rayed with serial numbers, dates and exposure periods, film position markings, etc. The marker has no bladder and does not contain any vials, thereby avoiding the risk of liquid spillage. Vivid green markings become observable under normal light conditions. These markings are not luminous in the dark but will be visible on radiography film. The markings have a spectral peak at 5600 Angstroms. Normal incandescent or fluorescent white light may be used to alter non radioactive emissions. Energy emissions are 3 to 4 minutes long and leave a marked impression without over exposure like generic products do. The pen features a handy pocket clip and is 114 mm in length. The writing tip is easily advanced by the screw knob. Reversing the screw knob and depressing the tip results in the retraction of the writing tip.

Supplier: Bel-Art Products, a Part of SP

Molded of Acetal plastic. This tubing clamp offers on/off and fine control so accurate that it replaces stopcocks in many applications.

Supplier: Bel-Art Products, a Part of SP

Racks, made of PP, translucent. Hold fragile spectralphotometer cuvettes in complete safety.

Supplier: Bel-Art Products, a Part of SP

White polypropylene, autoclavable

Supplier: Bel-Art Products, a Part of SP

PP, translucent.

Supplier: Bel-Art Products, a Part of SP

PP, white.

Supplier: Bel-Art Products, a Part of SP

Polycarbonate body and white polycarbonate lid, gel-filled.