You searched for: Environmental Test Kits

Supplier: Heyl GmbH & Co, Gebr.

Test kit for the determination of the water hardness in very soft or softened water samples via titration with a liquid titration agent and a pipette accurately calibrated in hardness units.

Supplier: Palintest

Aluminium reacts with Eriochrome Cyanine R indicator in slightly acid solution to produce a pink-red coloured complex.

Supplier: WTW

CombiCheck solutions are ready-to-use multi-parameter standards, Each package contains a standard solution and an addition solution. Both solutions can be used directly without dilution for quality assurance.

Supplier: Thermo Orion

Orion™ AQUAfast Powder Pack reagents perform colorimetric measurements of common water parameters with powders that dissolve quickly and mix easily.

Supplier: TSC LIMITED

Carcass hygiene blue sampling sponge in easy open stomacher pouch dosed with 0.9% saline.

Supplier: WTW

CombiCheck solutions are ready-to-use multi-parameter standards, Each package contains a standard solution and an addition solution. Both solutions can be used directly without dilution for quality assurance.

Supplier: Bernd Kraft

Test kit, Phosphate Reagent I, Bayer

Supplier: Bernd Kraft

FAM test fluids C contains a methanolic lower layer for polymer materials.

Supplier: EUTECH

Test kit, Free chlorine (DPD) reagent kit, For unit: C401

Supplier: Thermo Orion

Kit provides fast, accurate pH results in high purity and low ionic strength waters.

Supplier: Lovibond

MD 600 photometer is for precise and accurate measurements with a small footprint.

Supplier: Lovibond

Indicator for pH range 6,0 to 7,6.

Supplier: Palintest

Photometer tablet reagents are ideal format for the testing of drinking water, natural water, wastewater and other process applications.

Supplier: Thermo Orion

Use Thermo Scientific™ Orion™ AQUAfast digestion tubes, reaction tubes and liquid reagents with Orion™ AQUAfast colorimeters and Thermo Scientific™ Orion™ AquaMate Vis and UV-Vis spectrophotometers. Digestion and reaction tubes contain the precise amount of reagent, are made of special optical glass and fit the Orion™ AQUAfast COD165 thermoreactor. Digestion tubes measure COD, total nitrogen and total phosphate. Reaction tubes measure ammonia, nitrate and phosphate. Liquid reagents mix quickly and easily in solution and measure fluoride (SPADN), hydrazine and pH.

Supplier: Heyl GmbH & Co, Gebr.

Visual colour test method using a comparator disc. Two reagents.

Supplier: Thermo Orion

For use with Orion AquaMate 8000 UV-Vis Spectrophotometer, Orion AquaMate 7000 Vis Spectrophotometer, Orion AQUAfast AQ3700 colorimeter, Orion AQUAfast AQ3070

Supplier: Palintest

Pre-dispensed liquid reagents for minimal handing with barcoded reagent labelling for ease of use in complete wastewater analysis.

Supplier: Palintest

Tablet reagents for chlorine – free, combined and total (extended range DPD XF and XT).

Supplier: WTW

CombiCheck solutions are ready-to-use multi-parameter standards, Each package contains a standard solution and an addition solution. Both solutions can be used directly without dilution for quality assurance.

Supplier: Thermo Orion

Orion™ AQUAfast™ Total Nitrogen reagents in digestion tubes are designed for use with Orion™ AQUAfast™ 3700 colorimeter and Orion™ AquaMate Vis and UV-Vis spectrophotometers. Just add the sample to the digestion tube, digest sample in thermoreactor and measure.

Supplier: LGC Standards PROMOCHEM

The CRM BAM-U117 represents a mixture of a sandy soil collected from a contaminated
former gasworks area in the Berlin region (Germany) and an unpolluted sandy soil from
Nalaikh region (Mongolia). The raw materials were dried at ambient air to constant mass,
and afterwards the fractions passing a 2 mm screen were ground to particle sizes below
125 µm. Before bottling, the two fractions were mixed and homogenised.