You searched for: Environmental Test Kits

Supplier: WTW

A wide choice of tests is available, for routine quantitative analysis in different applications, designed for use with WTW spectrophotometers and photometers. The test is automatically recognised by the laboratory instruments (via a barcoding system) and results are displayed in the appropriate units. Due to the different photometer optics, one test may yield different measuring ranges in different instruments; LED photometers may have smaller measuring ranges for the same test.

Supplier: Hach

For determination of dissolved oxygen by the Winkler method (azide modification) and buret titration.

Supplier: Lovibond

The Silt Density Index (SDI) is a measure of the solids or particulate content of water and is of specific importance when commissioning reverse osmosis plant.

Supplier: WTW

Chemicals Alyza IQ PO4.

Supplier: Palintest

Test kit, Total Phosphorus, 0 - 12 mg/L P

Supplier: CHEMetrics

Test kits for environmental and drinking water applications in the ppm range.

Supplier: Thermo Orion

Two-step direct measurement of total alkalinity and pH using a pH electrode.

Supplier: Palintest

Comparator tablet reagents are designed for use with the contour comparator, standard comparator and other visual test platforms.

Supplier: Lovibond

Test kit, Copper/Zinc LR tablet, Range: 0,05 - 4 mg/l

Supplier: Lovibond

Test kit, Sulphate tablet, Range: 5 - 100 mg/l SO₄, For unit: MD600, MD610, MultiDirect and Spectrodirect

Supplier: LaMotte Chemicals

Kit is sufficient to perform up to fifty tests each for nitrogen, phosphorus, and potassium levels using non-hazardous TesTabs.

Supplier: Heyl GmbH & Co, Gebr.

Test kit, Water hardness reagent, Testomat®, 500 ml, Range: 4,48  -  44,8 mg/l CaCO₃

Supplier: Hanna

Test kit, Ammonia high range, Range: 0,0 - 50,0 mg/l

Supplier: CHEMetrics

Hydrogen Peroxide CHEMets® used to to monitor sterilisation solutions in the packaging and sanitising processes. Hydrogen peroxide is a strong oxidising agent used for treating of industrial effluents and domestic waste and serving as a disinfectant in aseptic packaging.

Supplier: WTW

CombiCheck solutions are ready-to-use multi-parameter standards, Each package contains a standard solution and an addition solution. Both solutions can be used directly without dilution for quality assurance.

Supplier: WTW

CombiCheck solutions are ready-to-use multi-parameter standards, Each package contains a standard solution and an addition solution. Both solutions can be used directly without dilution for quality assurance.

Supplier: NPS

Strips simultaneously test for acid/base, oxidiser, fluoride, petroleum product/organic solvent, and iodine/bromine/chlorine risks.

Supplier: Lovibond

Test kit, PHMB photometer tablet, Range: 2 - 60 mg/l PHMB, For unit: MD600, MD610

Supplier: Thermo Orion

Orion™ AQUAfast™ COD reagents in digestion tubes are designed for use with Orion™ AQUAfast™ colorimeters and Orion™ AquaMate Vis and UV-Vis spectrophotometers. Just add the sample to the COD digestion tube, digest sample in thermoreactor and measure.

Supplier: Thermo Orion

Orion™ AQUAfast™ Auto-Test Ampoule Reagents can be used with the Orion™ AQUAfast™ AQ4000 colorimeter to simplify sample preparation and tests.

Supplier: Lovibond

Indicator for pH range 5,2 to 6,8.

Supplier: Lovibond

Test kit, Hydrogen peroxide LR tablet, Range: 0,01 - 3 mg/l, For unit: MD600, MultiDirect and Spectrodirect

Supplier: Thermo Orion

Orion™ AQUAfast Powder Pack reagents perform colorimetric measurements of common water parameters with powders that dissolve quickly and mix easily.

Supplier: Palintest

Tablet Count kits provide a simple method of analysis for an important range of water parameters. The tests are particularly useful for the routine control of industrial waters such as boiler waters and cooling water systems, as well as swimming pools, natural waters and similar applications.

Supplier: MACHEREY-NAGEL

The DiaQuant® product line is specifically designed for the dialysis environment to test rinse and feed water, as well as sufficient potency levels of disinfectant when storing dialysis equipment. All tests are simple and fast without any mixing or mess. Proven technology makes testing reliable and accurate, thus providing a safe environment for patients.

Supplier: Heyl GmbH & Co, Gebr.

Test kit for the determination of the water hardness in very soft or softened water samples via titration with a liquid titration agent and a pipette accurately calibrated in hardness units.

Supplier: Palintest

Aluminium reacts with Eriochrome Cyanine R indicator in slightly acid solution to produce a pink-red coloured complex.

Supplier: WTW

CombiCheck solutions are ready-to-use multi-parameter standards, Each package contains a standard solution and an addition solution. Both solutions can be used directly without dilution for quality assurance.

Supplier: WTW

CombiCheck solutions are ready-to-use multi-parameter standards, Each package contains a standard solution and an addition solution. Both solutions can be used directly without dilution for quality assurance.

Supplier: Thermo Orion

Orion™ AQUAfast tablet reagents perform colorimetric measurements of common water parameters with convenient, rapidly dissolving tablets.