You searched for: Fittings and Connectors
These fittings for high-pressure connections are designed for tightening by hand or with compatible tools. The male and female fittings available will secure connections between instruments . Available in different sizes, shapes, and materials of fabrication, these fittings can be tailored to be suitable for any unique laboratory equipment setup. Fittings are suitable for use under extensive temperature ranges and are manufactured from stainless steel or plastic polymers for excellent strength.
Cross pieces, type KF
Supplier: Welch by Gardner Denver
It provides a flange fitting type.
Expand 5 Items
Tees, type KF
Supplier: Welch by Gardner Denver
Tees, Tees, type KF, DN25, Stainless steel
Expand 2 Items
Small flanges with hose nozzle
Supplier: VACUUBRAND
These flanges are made from aluminium or plastic.
Expand 13 Items
Small flanges with thread
Supplier: VACUUBRAND
These small flanges with thread made of stainless steel.
Expand 6 Items
Reducing tee, stainless steel, type KF
Supplier: Welch by Gardner Denver
Reducing tees, type KF made of stainless steel.
Expand 1 Items
Transfer device, FDC 1000
Supplier: B. Braun
Fluid dispensing connectors with luer-lock connections for syringes
Expand 1 Items
Tubing connectors, T-shaped, Nalgene®
Supplier: Thermo Fisher Scientific
PP, translucent.
Expand 6 Items
Tubing connectors, straight, Nalgene®
Supplier: Thermo Fisher Scientific
HDPE, translucent.
Expand 2 Items
Capillary column end caps
Supplier: Thermo Fisher Scientific
These capillary column end caps are universal and fit any capillary column.
Expand 1 Items
Reducing pieces with small flanges KF
Supplier: VACUUBRAND
Reducing pieces with small flanges KF made of aluminium or stainless steel.
Expand 10 Items
Ferrules for Agilent 5890, 6890 and 6850 instruments
Supplier: Thermo Fisher Scientific
Replacement SilTite™ ferrules for use with all SilTite™ connectors, SilTite™, Hole Ø: 0,32 mm
Expand 22 Items
SilTite™ µ-Union GC Capillary Column Connectors
Supplier: Thermo Fisher Scientific
The SilTite µ-Union is a connector for GC capillary columns, giving zero dead volume. It has low thermal mass, is only 9 mm in length and has a mass <0,5 g.
Expand 12 Items
Elbows, type KF
Supplier: Welch by Gardner Denver
Elbows, type KF, DN 16, Stainless steel
Expand 3 Items
Adapters, tubing, KA, KECK™, DURAN®
Supplier: DWK Life Sciences
KECK™ adapters are made up of glass-fibre reinforced, thermoplastic polyester (PBT) for glass hose couplings KA.
Expand 4 Items
Flanges with tubulation, type KF
Supplier: Welch by Gardner Denver
Flanges with short tubulation, type KF, DN16, Stainless steel
Expand 4 Items
Metal bellows with small flanges KF
Supplier: VACUUBRAND
Metal bellows with small flanges made of stainless steel.
Expand 4 Items
Cole-Parmer® Cleanroom Hose Barb Fitting
Supplier: Cole Parmer
This is used in cleanroom to minimise contamination by pollutants.
Expand 1 Items
BROEN-LAB UniFlex™ Flexible Stainless Steel Pipes for Special Water
Supplier: BROEN-LAB
BROEN-LAB offers BROEN-LAB UniFlex™ hoses and flexible Stainless Steel pipes as an easy way to make the installation in the laboratory where safety and efficiency are required. BROEN-LAB UniFlex™ hoses are the ideal solution where there is a higher requirement for flexibility. Installation with flexible hoses saves time and labour - in other words - reduced installation costs.
Expand 1 Items
Tubing connectors, straight through, Bayonet type
Supplier: COWIE
Straight through connectors, made of PTFE, bayonet type for flexible tubings.
Expand 7 Items
GC ferrules, SilTite™
Supplier: Thermo Fisher Scientific
SilTite™ ferrules are designed for use with capillary column connectors.
Expand 3 Items
Small flanges KF, screw-on
Supplier: VACUUBRAND
Small flanges made of stainless steel with sealing ring made of NBR.
Expand 3 Items
Tubing connectors, 4-way
Supplier: COWIE
4-way connectors, made of PTFE, bayonet type for tubings.
Expand 7 Items
GC capillary column connectors, SilTite
Supplier: Thermo Fisher Scientific
For use with GC capillary columns and fused silica capillary columns.
Expand 4 Items
Adapters, swivelling screw fittings for GL threads, BOLA
Supplier: Bohlender
Screw cap made from PPS, inner section made from PTFE.
Expand 4 Items
GC capillary column connectors, Finger Tite
Supplier: Thermo Fisher Scientific
Metal-to-metal seal eliminates contamination and gives lower air/water background noise. No need to retighten ferrules, as they expand and contract with the fitting over GC operating temperatures.
Expand 6 Items
Supplier: Integra
Supplier: EPPENDORF
Supplier: Integra
Supplier: OZ BIOSCIENCES
Supplier: VWR Collection
Supplier: Corning
Supplier: SenseAnywhere
Supplier: NANOENTEK
Supplier: VWR Collection
Supplier: Integra
Supplier: TESTO
Supplier: Sartorius
Supplier: SenseAnywhere
Supplier: Quantabio