You searched for: Cleanroom Wipes

Supplier: Texwipe

MiracleWipe® is made from 100% continuous-filament nylon. The double-knit construction, texture and body of the nylon filament give the wipes excellent softness and superior strength.

Supplier: Texwipe

Texwipe® is a strong, double-sided twill-pattern cotton wipe woven in a cross section of 118×60 threads per square inch. The product is manufactured with long stable cotton yarn to eliminate free-floating fibres on fabric surfaces. Ideal for cleaning diffusion furnace equipment in water fabrication and other equipment in areas where high temperatures prevent the use of synthetic wipes.

Supplier: Texwipe

TechniCloth® wipes are made from a hydroentangled, non woven blend of 55% cellulose and 45% polyester. This fabric blend combines the highly absorbent properties of a natural fibre with the cleanliness and strength of a synthetic wipe.

Supplier: Texwipe

TechniCloth II wipes are made from a hydroentangled, non woven blend of 55% cellulose and 45% polyester. This fabric blend combines the highly absorbent properties of a natural fibre with the cleanliness and strength of a synthetic wipe. TechniCloth II features proprietary ULP (ultra low particulate) treatment, giving it significantly lower particle generation than TechniCloth.

Supplier: Texwipe

These wipes are primarily intended for the usage as flat mop covers for cleaning and decontaminating floors. Made of non-woven polyester, they are especially suitable for cleaning and removing residues.

Supplier: Texwipe

This thick polypropylene and cellulose wipe is thermally bonded in a unique composite construction. The cellulose contributes to the product’s high sorption, while the PP provides the wipe with resistance to strong acids. With its very soft surface texture, it's is ideal for cleaning sensitive surfaces and delicate instruments.

Supplier: CONTEC

100% nonwoven polyester wipes presaturated with 70% IPA and 30% DI water.

Supplier: Texwipe

These lightweight, high quality wipes are constructed from 100% continuous-filament polyester.

Supplier: CONTEC

Presaturated with 70% USP grade IPA and 30% DI water.

Supplier: CONTEC

Slide 'n seal bag is a resealable bag that allows easy dispensing of PROSAT® polywipe-C pre-saturated wipes. The plastic piece glides across the top of the bag ensuring a tight seal every time the bag is closed. No adhesives are used to keep the bag closed.

Supplier: Texwipe

ThermaSeal™ wipes are hot cut polyester wipes for all-purpose cleaning in critical environments. Ideal for cleaning medical devices, displays and products in the semiconductor and microelectronics area.

Supplier: CONTEC

Cellulose/polyester nonwoven wipes presaturated with 70% IPA and 30% DI water.

Supplier: Texwipe

This wipe is constructed from a non woven blend of 55% cellulose and 45% polyester that offers both durability and absorbency. The blue tint indicates exposure to liquid which makes the wipe ideal for alerting the user to the exposure of liquids and/or dangerous spills.

Supplier: Texwipe

SterileWipe™ AS 10 is a 2 ply, double knit construction, 100% continuous filament polyester wipe that offers high sorbency in a sealed-border wipe to prevent particle and fibre release.

Supplier: Texwipe

Sterile TexTra™ is a single-ply, double-knit, 100% continuousfilament polyester wipe that offers high-capacity sorption in a heavyweight, large surface area wipe. It is an economical alternative to two-ply polyester wipes and ideal for spill control as well as for cleaning pharmaceutical aseptic fill areas, biotechnology manufacturing facilities, and microbiological laboratories.

Supplier: CONTEC

The Amplitude™ Sigma™ Plus wipes are strong and durable, compatible with most solvents, and have outstanding sorbency.

Supplier: CONTEC

Cellulose/polyester nonwoven wipes presaturated with 70% IPA and 30% DI water

Supplier: Texwipe

Cut-edge polyester single ply wipe that is ideal for floor cleaning and for applying cleaning solutions and disinfectants on floors.

Supplier: Texwipe

SterileWipe™ LP is a 100% continuous-filament cut edge polyester wipe that is low in particle generation and extractable levels. It provides excellent cleaning performance in critical sterile environments such as pharmaceutical aseptic fill areas, biotechnology manufacturing facilities, microbiological laboratories, sterile suites and prep rooms.

Supplier: Texwipe

SterileWipe™ LP 10 is a 100% continuous-filament polyester wipe with thermally sealed borders that have been designed to control particle and fiber contamination. The wipe is suitable for cleaning sterile environments such as pharmaceutical aseptic fill areas, biotechnology manufacturing facilities, microbiological laboratories, sterile suites and prep rooms.

Supplier: Texwipe

These single-ply, heavyweight polyester sealed-border wipes offer the same capacity sorption as a two-ply wipe. They are suitable for all general purposes as well as for applying and removing large volumes of cleaning solutions and disinfectants.

Supplier: Texwipe

These 100% continuous filament, polyester knit fabric wipes with sealed edges offer a very soft feel and high sorptive capacity.

Supplier: Texwipe

The sealed-border technology used for these wipes produces four fully sealed borders to prevent the release of fibres and particles. The fabric is a no-run interlock, double knit from 100% continuous-filament polyester.

Supplier: Texwipe

These FoamWipe™ wipes are made from open-cell, 100 pore-per-inch polyurethane foam.

Supplier: Texwipe

VersaWipe® is made from 45% polyester / 55% cellulose non woven material with a cut edge. Ideal for spill control, cleaning, and solution application.

Supplier: Texwipe

SterileWipe™ HS II is a non woven cellulose/polyester-blend wipe offering both durability and absorbency. It is an excellent general purpose sterile wipe in areas where economy and cleanliness are of critical importance. Designed for cleaning and polishing equipment and environmental surfaces during and following production flow.

Supplier: Texwipe

Double-knit 100% continuous-filament polyester wipe is ideal for removal of process residues and broken wafer segments.

Supplier: Texwipe

This wipe made of 55% non woven cellulose and 45% polyester fibre is pre-saturated with 6% IPA.

Supplier: Texwipe

This non woven 55% cellulose/45% polyester blend wipe is an excellent general-purpose sterile wipe in areas where economy and cleanliness are of critical importance.

Supplier: Texwipe

These 2-ply double-knit 100% continuous-filament polyester wipes offer high sorbency performance.