You searched for: Cleanroom Wipes

Supplier: CONTEC

Amplitude™ Prozorb® wipes are a hydroentangled blend of cellulose and polyester, produced through a special process that creates apertures in the fabric while enhancing the thickness and providing excellent cleanliness.

Supplier: CONTEC

These wipes are made from a 100% no-run interlock knit polyester construction with knife cut edges.

Supplier: CONTEC

Hydroentangled split microfibre wipes pre-saturated with 70% IPA and 30% DI water.

Supplier: CONTEC

This wipe is made from filament polyester that is laser cut to bond the fibres at the edges of the wipe. This creates a very clean, non abrasive edge that allows full utilisation of the wipe surface. Pre-saturated with 5% semi grade IPA and 95% DIW.

Supplier: CONTEC

100% interlock knit lightweight polyester wipes with sealed edges.

Supplier: CONTEC

These PROSAT® wipes are manufactured from a lightweight hydroentangled cellulose/polyester and saturated with a solution of 70% USP grade IPA and 30% deionized water.

Supplier: CONTEC

These low endotoxin wipes are made from 100% knitted polyester and pre-saturated with a blend of 70% USP-Grade IPA and 30% water for injection (WFI).

Supplier: CONTEC

These non woven wipes are made from meltblown polypropylene pre-saturated with 70% semiconductor grade isopropanol and 30% deionised water.

Supplier: CONTEC

SATWIPES® Sigma™ consists of a perforated roll of saturated wipes which are dispensed through a center-pull canister. The wipes are made of 55% cellulose and 45% polyester presaturated with IPA and DI water.

Supplier: CONTEC

These heat seal wipes are made from filament polyester that is laser cut to bond the fibres at the edges of the wipes. This creates a very clean, non abrasive edge that allows full utilisation of the wipe surface. The wipes are saturated with 70% USP grade IPA, 30% DI water.

Supplier: CONTEC

Contec HydroPure is a blend of 6% hydrogen peroxide and purified water. Contec HydroPure is BPR authorised at EU level and efficacious against bacteria, fungi, moulds, and yeasts.

Supplier: CONTEC

The Polywipe-C Heatseal wipe is made from filament polyester and pre-saturated with 70% IPA and 30% DI water.

Supplier: CONTEC

These wipes are made of 100% knitted polyester pre-saturated with 100% semiconductor grade Isopropyl Alcohol (IPA).

Supplier: CONTEC

Meltblown polypropylene wipes presaturated with 70% IPA and 30% DI water.

Supplier: CONTEC

This durable wipe is made from 100% non woven polyester fibers, hydroentagled into an extremely soft, clean, and strong fabric which is very low in both particles and extractables.

Supplier: CONTEC

Recycled 100% knitted polyester cleanroom wipes, providing a sustainability story in a single-use world.

Supplier: Texwipe

Vertex® wipes are the cleanest, most consistent, and most rigorously quality tested cleanroom wipes.

Supplier: Texwipe

These hot-cut polyester wipes are suitable for all-purpose cleaning in critical cleanroom environments.

Supplier: Texwipe

Alpha® 1 Microfibre cleanroom wipes are made from a 80% polyester/20% nylon material with a sealed edge, and are cleanroom manufactured.

Supplier: Texwipe

ThermaSat™ 60 wipes are made from 100% polyester with a sealed edge, and cleanroom laundered.

Supplier: Texwipe

AlphaSorb® HC is a cleanroom laundered, 2 ply, 100% polyester wipe made from continuous-filament polyester knitted in a double-knit interlock pattern.

Supplier: Texwipe

These premium heavy-weight all-purpose wipes are made from 100% continuous filament polyester in a double-knit, no run, interlocked pattern. Soft and non abrasive, they are ideal for critical environments where contamination control is essential.

Supplier: Texwipe

These 100% polyester wipes are made by a hydroentanglement process using jets of water to mechanically entangle the fibres, eliminating the need for chemical binders.

Supplier: CONTEC

Presaturated with IPA/DI water.

Supplier: CONTEC

These absorbent non abrasive wipes consist of long staple cellulosic fibres which are wet laid in a paper making process to form an extremely clean sheet.

Supplier: Texwipe

Absorbent, single ply, 100% continuous filament polyester wipes, feature enhanced sorbency.

Supplier: Texwipe

Revolve™ sustainable wipes are made for the cleanroom industry and are composed of 100% upcycled polyester material with a sealed edge, processed on Texwipe’s fully automated manufacturing system. Revolve™ wipes contribute to sustainability goals, reducing the amount of post-consumer water bottles going into landfills and reducing the level of carbon emissions.

Supplier: Texwipe

Revolve™ wipes, sustainable wipes made for the cleanroom industry, are made from 100% upcycled polyester material with a sealed edge, processed on Texwipe’s fully automated manufacturing system. Revolve™ wipes contribute to sustainability goals, reducing the amount of post-consumer water bottles going into landfills and reducing the level of carbon emissions.

Supplier: Texwipe

TechniScrub™ dry wipes are made from a 50% polyester/50% cellulose non woven material with a cut edge. They are cleanroom manufactured.

Supplier: Texwipe

TechniCloth® wipes are made from a hydroentangled, non woven blend of 55% cellulose and 45% polyester. This fabric blend combines the highly absorbent properties of a natural fibre with the cleanliness and strength of a synthetic wipe.