You searched for: Silica gel

Supplier: Merck

Silica gel, Supelco®

Supplier: Merck

Silica gel, Supelco®

Supplier: Merck

Silica gel, Supelco®

Supplier: Merck

Silica gel, Supelco®

Supplier: Merck

Silica gel, Supelco®

Supplier: Merck

Silica gel drying agent, with moisture indicator (orange gel), Supelco®

Supplier: Merck

Silica gel, Pore size: 60 Å, Supelco®

Supplier: Merck

Silica gel, Pore size: 60 Å, Supelco®

Supplier: Merck

Silica gel, beads ~2 - 5 mm desiccant, Supelco®

Supplier: Merck

Silica gel drying agent, with moisture indicator (orange gel), Supelco®

Supplier: Merck

Silica gel sachet: 4 x 7 cm desiccant, with moisture indicator (orange gel), Supelco®

Supplier: Merck

Silica gel 1 - 4 mm drying agent, with moisture indicator (brown gel), Supelco®

Supplier: Merck

Silica gel sachet: 7 x 9 cm desiccant, with moisture indicator (orange gel), Supelco®

Supplier: Merck

Silica gel 40 6-14 mesh, Technical Grade, Supelco®

Supplier: VWR Chemicals

Silica gel 40 - 63 µm for flash chromatography

Supplier: Merck

Silica gel, FluoroFlash® ~40 μm particle size, Supelco®

Supplier: Thermo Fisher Scientific

Silica gel ≥99.5%, large pore

Supplier: Merck

Silica gel, spherical 75-200 μm particle size, Supelco®

Supplier: Merck

Silica gel FIA, acc. DIN 51791, high purity, Supelco®

Supplier: Merck

Silica gel, spherical 40-75 μm particle size, Supelco®

Supplier: VWR Chemicals

Silica gel, NORMASIL 60® 40 - 63 µm

Supplier: Thermo Fisher Scientific

Silica gel, Pore size: 300 Å, spherical

Supplier: VWR Chemicals

Moisture absorber, neutral, not deliquescing, not corrosive. It can be regenerated by heating at about 150 °C

Supplier: Thermo Fisher Scientific

Silica gel 3-6 mm, non toxic for drying

Supplier: VWR Chemicals

Silica gel 60, irregular 60 - 200 µm for flash chromatography

Supplier: VWR Chemicals

Silica gel 60, irregular 40 - 63 µm for flash chromatography

Supplier: Thermo Fisher Scientific

Silica gel 2-5 mm, non toxic for drying, with moisture indicator (orange gel)

Supplier: Merck

Desiccant suitable for desiccators to remove water, and for drying most gases and liquids (apart from strongly acidic and basic gases, organic solvents or alkaline liquids). The product contains iron salts as the indicator. Colour change is from orange to colourless at approx. 7/10 g adsorbed H₂O/100 g silica gel. Regeneration can be performed as often as required at 130 to 140 °C in a drying oven for approx. 3 hours.

Supplier: Merck

Silica gel Grade 22 pore size 60 Å, 60-200 mesh, Supelco®

Supplier: VWR Chemicals

Glassy, hard, irregular shaped granules with a very high purity of SiO₂ and an internal surface of approx. 800 m²/g. Because of its very large surface area, this silica gel exhibits a high adsorption for water vapour.