You searched for: Vials

Supplier: LA PHA PACK

These vials are for use on instruments from the following manufacturers: Agilent, Beckman, Carlo Erba, CTC, Fisons, PerkinElmer, Shimadzu, Thermo Scientific, VWR®/Hitachi, etc.

Supplier: THERMO NATIONAL SCIENTIFIC

Original Waters™ 4 ml WISP™ autosampler snap/crimp top vials. Superior quality 33 expansion borosilicate clear glass (Type 1, Class A) with flat bottom.

Supplier: NEOLAB

Due to their technical geometry, the neochrom® threaded vials with ND9 can be used on all popular autosamplers.

Supplier: Restek

These inserts are used with 2 ml, 11 mm crimp top and 2 ml, 9 mm short cap, screw thread vials.

Supplier: LA PHA PACK

Screw neck vials in clear or amber glass, hydrolytic class 1, for sample storage. A broad range of closed top screw caps are available with different types of septa.

Supplier: Restek

Big mouth step vial kits with black cap, preassembled (caps are attached to vials).

Supplier: PerkinElmer

This screw top waste and wash vial is manufactured from type I borosilicate glass.

Supplier: MURRAY S

Vials made from neutral glass with PE plug stoppers. Suitable for a wide variety of uses in the laboratory, production, more.

Supplier: DELTALAB

Single use vials made of high density polyethylene to minimise solvent losses.

Supplier: Restek

Precleaned volatile organic analyte sampling vials with open-top caps.

Supplier: Restek

Screw-thread step vials.

Supplier: THERMO NATIONAL SCIENTIFIC

These vials are made of superior quality 33 expansion borosilicate clear glass.

Supplier: LA PHA PACK

These vials are for use on instruments from the following manufacturers: Agilent, CTC, DANI, Dionex, Jasco, Shimadzu, Spark, Thermo Scientific, Varian, VWR®/Hitachi, Waters®, etc.

Supplier: Restek

Chromatography vial, Crimp neck, 2,00 ml, Glass, Clear, Non sterile, Cap included: Yes, Cap colour: Silver, Septum: PTFE/silicone

Supplier: MUELLER KREMPEL

Vials made from AR glass, clear with black screw cap. Ideal for taking, storing and transporting samples.

Supplier: THERMO NATIONAL SCIENTIFIC

These headspace vials are manufactured to provide uniform glass thickness which insures even heat distribution for consistent sampling reliability. Use Tin plate seals with magnetic pick autosamplers. Pressure release seals are designed to open when internal pressures exceed 3,0 ±0,5 bar, protecting equipment during analysis of highly volatile samples.

Supplier: DELTALAB

These flat bottom screw thread vials are made of ultra clear borosilicate glass.

Supplier: LA PHA PACK

These vials are preferentially used on instruments of the following manufacturers: Alcott, Gilson, Shimadzu, Waters® (Wisp 96 respectively 48-position carousel).

Supplier: BIOCISION

TruCool® leak-proof cryogenic vials feature a screw cap with a thermally-fused gasket to ensure a tight seal. The gasket is a co-molded thermoplastic elastomer (TPE) layer, which prevents leaking, slipping and risk of contamination. The gasket is 95 kPa certified to provide a leak-proof seal. These vials are sterile and individually barcoded with a unique identifier which can be read with common barcode readers. Ideal for use in CoolRack® CF cryogenic vial modules and CoolCell® alcohol-free cell freezing containers. Recommended for use in vapor phase LN₂ only.

Supplier: THERMO NATIONAL SCIENTIFIC

These convenience vial kits contain caps with pre-inserted septa that are not attached to vials.

Supplier: LA PHA PACK

Standard glass or plastic vials for GC and HPLC, micro-inserts, closures and kits. Can be used universally on almost all autosamplers, preferred type of vial for Waters and Agilent.

Supplier: THERMO NATIONAL SCIENTIFIC

These sample storage unassembled convenience kits save time during sample preparation.

Supplier: NEUBERT VOLUME GLASSWAERE

Crimp vial made of quartz glass.

Supplier: THERMO NATIONAL SCIENTIFIC

Glass vials are precrimped with an aluminium seal and PTFE/red rubber septum.

Supplier: THERMO NATIONAL SCIENTIFIC

These storage vials provide constant pH for duration of sample storage life and are available in the capacity ranges of 2 to 40 ml. Manufactured in Type 1, Class A, 33 expansion borosilicate glass or 51A amber glass.

Supplier: DELTALAB

Tubes and caps made of autoclavable PP. Designed for the storage of biological material at temperatures as low as –196 °C (only in the gas state if stored in liquid nitrogen).

Supplier: WATERS

Chromatography vial, Screw neck, external thread, 2,00 ml, Glass, Clear, Ø×H: 12×32 mm, Non sterile, Cap included: Yes

Supplier: SARSTEDT

These scintillation vials with screw cap are made from HDPE.

Supplier: Beckman Coulter

Microvials can be used as vial inserts for small volume sample introduction into the CESI 8000, PA 800 series and P/ACE MDQ systems.

Supplier: WATERS

Vial insert, 0,15 ml, Glass, Ø×H: 8×40 mm, Non sterile, Cap included: No