Microplate Seals

Supplier: Thermo Fisher Scientific

Effective sealing of all microplate formats. For storage, PCR, microscopy, culture and protection.

Supplier: VWR Collection

These heat resistant 74,9 µm thick films are designed for thermal cycling applications. Polypropylene films are not pierceable. For PCR applications, where piercing with pipette tips or robotic probes is required for product recovery, use aluminium foil films. For real-time PCR applications, where maximum optical clarity is required, use optically-clear polyester films.

Supplier: VWR Collection

A 139,7 µm thick hydrophobic porous film with medical grade adhesive for tissue culture plates, bio-blocks, and 96-well plates where gas exchange is necessary for cell or bacterial growth. These rayon films minimise cross-contamination, spillage and evaporation. They allow uniform air and CO₂ exchange for all wells, unlike plate lids which favour exchange for wells near plate edges. Sterile product is packed in tamper evident bags of 25.

Supplier: VWR Collection

Polyester film, acrylic adhesive. These 49,5 µm thick polyester films minimise evaporation and prevent spillage and contamination between wells.

Supplier: VWR Collection

These films are 240 µm thick black vinyl with adhesive for use with 96-well, 384-well and 1536-well black microplates. They fit within the edges of raised rim plates and may be applied to either the plate top or bottom. The light blocking and absorbing properties of these films make them ideal for reducing stray light and crosstalk in fluorescence applications and for protecting light-sensitive samples in storage.

Supplier: VWR Collection

Easier to apply and remove as compared to standard moulded PCR strip caps.

Supplier: Thermo Fisher Scientific

Optically clear adhesive plate sealing film designed for qPCR and other fluorescence applications.

Supplier: Thermo Fisher Scientific

Made from polypropylene (PP).

Supplier: THERMO MATRIX TECHNOLOGIES

Thermo-Seal, Microplate seal for ALPS 50V, Heat sealing film/foil/tape (96/384 wells), Single sheet/mat/strip, Foil, heat sealing, Thermo-Seal, foil laminate

Supplier: Trajan Scientific and Medical

Trajan's Pure-Pass™ EVA sealing mats are perfect for samples. Mats are designed to protect from leaks, contamination, and evaporation during both sampling and storage.

Supplier: THERMO MATRIX TECHNOLOGIES

Individual storage plate caps are designed for sealing storage plates and cluster tubes.

Supplier: Thermo Fisher Scientific

Clear, 24-well format Piko® PCR/qPCR film seal allows high transmission of fluorescence across the range of commonly used fluorophores. When used with a Piko® thermal cycler or PikoReal® Real-Time PCR system, sample volumes as low as 5 µl can be used with minimal evaporative loss.

Supplier: Thermo Fisher Scientific

VersiCap™ mats are designed to seal VersiPlate 96-well PCR strip tubes, but can be used will all Thermo Scientific strip tubes and 96-well plates.

Supplier: Thermo Fisher Scientific

These flat cap strips provide an extremely tight seal in UTW (ultra-thin walled) PCR plates. They are an ideal choice for low volume reactions where it is important to minimize vapor loss.

Supplier: THERMO MATRIX TECHNOLOGIES

Strips of eight caps for sealing storage plates and racked cluster tubes. The strips are compatible with Thermo Scientific microplates, 0,8 ml storage plates, 1,2 ml round well storage plates and 1,2 ml cluster tubes ranges.

Supplier: Cytiva (Formerly Pall Lab)

Microplate seal, Mat (96 wells), Single sheet/mat/strip, Cap mat for incubation, Cap mat for incubation