You searched for: Seals

Supplier: Restek

Mechanical Seals, Liner seals, for CIS4 and PT

Supplier: Restek

Mechanical Seals, Replacement ring seal for MSD conversion fitting

Supplier: Restek

These graphite sealing rings are suitable for Thermo Scientific TRACE, 8000, 8000 TOP and Focus SSL instruments. They fit liners with 8 mm outer diameter.

Supplier: Restek

Replacement parts for Shimadzu HPLC systems.

Supplier: Restek

Cross disc inlet seals are ideal for high-flow split applications >500 ml/min on Agilent 5890 GCs.

Supplier: Restek

These inlet seals are washerless and leak-tight and ideal for high-flow split applications >500 ml/min.

Supplier: ELKAY

SealPlate breathable sealing film is a hydrophobic rayon film with end tabs, using medical grade adhesives.

Supplier: Restek

Silver seals for Thermo Scientific TRACE, 8000, 8000 TOP and Focus.

Supplier: Aesculap

Seal to secure the container lock against uncontrolled opening.

Supplier: SciLabware

Silicone rubber sheathed with PTFE.

Supplier: Restek

Inlet liner seals with maximum temperature 450 °C.

Supplier: VICI

Mechanical Seals, Rotor seal 8-port 3-position C75 valve

Supplier: SciLabware

PTFE, white.

Supplier: QVF LABORTECHNIK

Mechanical Seals, Overhead stirrer, Stirrer seals, KPG, sealed, NS 29/32, for 16 mm shaft

Supplier: Aesculap

Security seal, Tamperproof lock with orange steam indicator

Supplier: Thermo Fisher Scientific

Thermo Scientific™ Rheodyne™ replacement rotor seals for injectors made of ETFE to maintain the performance of Rheodyne™ sample injectors for high-performance liquid chromatography (HPLC).

Supplier: Restek

Replacement inlet seal washers

Supplier: Restek

Inlet seals are used at the base of the Agilent 5890/6890/7890 GC injection port, which contacts the sample and should be changed frequently to prevent adsorption of active compounds. In addition, septum fragments and sample residue accumulate on the disk surface, requiring disk replacement.

Supplier: Restek

Mechanical Seals, Silver seal for split/splitless injector

Supplier: RATIOLAB

Closures for 96-Well Deep-Well-Plates Low-Profile, 1,2 ml. Made of thermo-plastic elastomer (TPE).

Supplier: Greiner Bio-One

These adhesive seals offer an alternative to heat seals or sealing mats. EASYseal™ is a transparent adhesive film designed to cover microplates to protect samples from evaporation and contamination. It is suitable for routine laboratory use, including ELISA applications. BREATHseal™ is a gas permeable, pierceable membrane coated with an acrylic adhesive. It is ideal for bacterial, yeast and cell culture applications, assuring the protection of cell contents from contamination whilst maintaining oxygenation.

Supplier: RATIOLAB

Microplate seal, Adhesive film/foil/tape (96/384 wells), Single sheet/mat/strip, Cover film, Aluminum universal cover film, Aluminium, Non sterile

Supplier: GLINDEMANN DIETER

PTFE, white.

Supplier: Greiner Bio-One

SILVERseal™ is a heat resistant, cold-resistant and pierceable aluminium foil, which is suitable for both PCR applications and sample storage.

Supplier: Greiner Bio-One

VIEWseal™ is an adhesive sealing film coated with a silicone adhesive, which only sticks when the film surface is pressed on. The film is easy to work with, even when wearing gloves (the film does not adhere to gloves).

Supplier: Restek

A ring inlet seal greatly improves injection port performance as it stays sealed even after repeated temperature cycles, without retightening the reducing nut. This seal features two soft Vespel® rings, one embedded in its top surface and the other embedded in its bottom surface. These rings eliminate the need for a washer and ensure very little torque is needed to make a leak-tight seal.

Supplier: DIVERSIFIED BIOTECH

Microplate seal, Adhesive film/foil/tape (96/384 wells), Single sheet/mat/strip, HotSeal, pre-cut self-adhesive sheets, Sealing film for PCR, HotSeal, Polyester, Sterile

Supplier: DWK Life Sciences

A comprehensive line of 96-well microplates for chromatography, the Plate Sampling System™ uses closures familiar to those who work with standard chromatography vials.

Supplier: Restek

O-rings for APEX liners

Supplier: Greiner Bio-One

AMPLIseal™ is a self-adhesive sealing film notable for its low autofluorescence, in particular in the wavelength range critical for Real Time PCR. It consists of a thick PP film coated with a transparent acrylate adhesive. The adhesive layer is protected by a peelable polyester film. The strongly adhering acrylate adhesive provides reliable sealing, thereby minimising evaporation but without influencing the PCR reaction or the fluorescence measurement.