You searched for: Membrane Filters

Supplier: Merck

PVC membrane filters are specified by ASTM, NIOSH, and OSHA in air monitoring applications to analyse silica, carbon black, metals, quartz particulates and others.

Supplier: Merck

Ultrafiltration membranes - Amicon™ XM polyacrylonitrile/PVC co-polymer filters. High-recovery membranes for stirred cells.

Supplier: Whatman products (Cytiva)

A polyester backed and highly consistent membrane for use with low viscosity samples in a lateral flow assay.

Supplier: Sartorius

These are general purpose membrane that provide excellent performance with most solutions when retentate recovery is of primary importance.

Supplier: Sartorius

PTFE hydrophobic membrane filters. For filtration of air, gases, solvents and acids. Sterilisation by autoclaving or ethylene oxide.

Supplier: Sartorius

Non sterile membrane filters for colony counting, particle testing, microscopy and sterility testing. The membrane filters are made of cellulose nitrate (cellulose ester).

Supplier: Sartorius

These cellulose nitrate membranes are suitable for air monitoring.

Supplier: Sartorius

Membrane filters manufactured from high grade PC film using track etch technology. Applicable for particulate analysis, epifluorescence miroscopy, fluid clarification, cytology, cell biology, bioassays, water microbiology, environmental analysis.

Supplier: Sartorius

Cellulose nitrate hydrophilic, gridded membrane filters for colony counting, particle testing and microscopy, with outstanding recovery rates for microorganisms.

Supplier: Cytiva (Formerly Pall Lab)

Naturally hydrophilic highly versatile laboratory membrane filter.

Supplier: Spectrum Laboratories

Pre-cut membrane discs are used with Spectra/Por® MacroDialyzers and Equilibrium Dialyzers.

Supplier: Bohlender

Membrane filters made of microporous PTFE, with 0,2 mm thickness.

Supplier: Merck

Durapore® PVDF white membranes provide high flow rates and throughput, low extractables and broad chemical compatibility. Hydrophlic membrane binds far less protein than nylon, nitrocellulose, or PTFE membranes.

Supplier: ENTEGRIS

These filter disc series with non-woven PP media can be used for simple, quick and efficient filtration of fluids used in laboratory, pilot and small scale applications. Can be used for clarification of acids, bases and solvents.

Supplier: Merck

Ultrafiltration cut disc membranes are available in Ultracel® regenerated cellulose and Biomax® polyethersulvone (PES).

Supplier: Merck

Ultrafiltration cut disc membranes are available in Ultracel® regenerated cellulose and Biomax® polyethersulvone (PES).

Supplier: Merck

MF-Millipore™ filters without Triton® surfactant contain minimum amounts of wetting agent and have a lower water extractable content than standard MF-Millipore™ filters.

Supplier: Cytiva (Formerly Pall Lab)

Hydrophilic PES Supor® membrane for reduced filtration time, optimised for biological, pharmaceutical and sterilising filtration requirements.

Supplier: Merck

Cellulose support pads are used to reinforce filters in monitors for contamination analysis. When saturated with growth medium, they can also be used for culturing microorganisms on membranes.

Supplier: Sartorius

Cellulose nitrate hydrophilic membrane filters. For sample pretreatment, particle testing and chemotaxis.

Supplier: Cytiva (Formerly Pall Lab)

Strong, chemically resistant membranes for air monitoring and sampling in aggressive environments.

Supplier: Merck

These PP white filters are designed for general clarification and prefiltration of solvents, deionized water and bioburden reduction.

Supplier: Whatman products (Cytiva)

Nuclepore™ track-etched hydrophilic membrane filters offer a highly defined pore size cut-off in the submicron range, enabling particle deformity measurement and capture of extremely small particles. The membranes have sharply defined pores, high flow rates, and excellent chemical and thermal resistance. They are suitable for a variety of samples and applications, including microscopy, cytology, parasitology, and certain air and oceanography analyses.

Supplier: Cytiva (Formerly Pall Lab)

The next generation of universal hydrophilic PTFE membrane with maximum chemical compatibility when filtering both aqueous solutions and aggressive solvents.

Supplier: Sartorius

Gelatine membrane filters in conjunction with the MD8 air samplers (gelatine filter method) are used for the collection of airborne microbes and viruses. These filters are completely water-soluble, therefore, microbes in one sample can be cultivated in different nutrient media or low and high bacteria counts can be measured.

Supplier: LIOFILCHEM

Mixed cellulose ester membrane for the isolation and enumeration of bacteria by membrane filter technique.

Supplier: Merck

Biologically inert mixtures of cellulose acetate and cellulose nitrate have made MF-Millipore™ membrane filters one of the most widely used membranes in analytical and research applications.

Supplier: Sartorius

These membrane filters have high hydrophilicity and exceptionally low non-specific binding characteristics. These membranes are ideal for sample cleaning and protein removal and when high recovery of the filtrate solution is of primary importance.

Supplier: Merck

Nylon filters are compatible with a broad range of solvents. Two types of filters are available, membrane filters with pore sizes ranging from 0,20 to 1,20 µm and woven net filters with mesh openings ranging from 10 to 180 µm.

Supplier: Sartorius

Hydrophilic polyamide (nylon) membrane filters. For the filtration of alkaline solutions and organic solvents.