You searched for: Closures

Supplier: BELLCO GLASS

Screw caps are made from mineral-filled phenolic resin to resist the effects of temperature and steam autoclaving. They have a non-toxic white rubber liner for all general culture applications.

Supplier: VWR Collection

Screw caps with spraying tube (swan-neck).

Supplier: RIXIUS

Finger atomizer made of polypropylene with 2 mm sealing.

Supplier: DWK Life Sciences

LDPE, coloured.

Supplier: RIXIUS

Spray gun made up of polypropylene.

Supplier: DWK Life Sciences

Screw cap made of radiation grade polypropylene.

Supplier: Kautex

LDPE, natural colour.

Supplier: Thermo Fisher Scientific

PP, translucent. with polyethylene insert.

Supplier: BURKLE

PP spray attachment.

Supplier: Merck

Specially developed screw caps for direct instrument connection of Merck S 40 threaded bottles ensure safe handling of solvents in the lab and protect human health, the environment, as well as solvent quality.

Supplier: VWR Collection

Collect your solvent waste safely without being exposed to solvent vapours or hazardous gases. High quality materials (PTFE, PP) ensure maximum safety for your laboratory staff and environment.

Supplier: Bohlender

b.safe caps together with fittings, tubing and an air valve form a perfect unit for solvent extraction from laboratory flasks.

Supplier: S.C.A.T.

The Safety Waste Collector connects capillaries and tubes of the HPLC system with the disposal system - suitable for the SymLine benchtop feedthroughs and SymLine FLEX.

Supplier: Bohlender

b.safe waste tubes can be connected to the canister by means of these b.safe system waste caps and solvents can be collected safely. To avoid spill over of canisters through the connection of a Waste Cap to a b.safe Display for electronic level control. The filling levels of waste containers in laboratory cupboards and workbenches can be reliably monitored. With the use of b.safe Waste Tubes, solvent waste is led directly into the canister, solvent vapours are held back by the exhaust filter with activated carbon or can be led to the hood by means of a venting hose.

Supplier: S.C.A.T.

Starter kits consisting of SCAT SafetyCaps, blind plugs, fittings and air valves for the supply of HPLC systems.

Supplier: S.C.A.T.

SCAT Safety Waste Caps, made of electrically conductive PTFE, are hermetically sealing caps for the safe disposal of your liquid HPLC waste (e.g. solvents, acids, alkalis).

Supplier: S.C.A.T.

S.C.A.T. 'MARCO' V2.0 safety funnels can be closed safely and prevent danger of ignition.

Supplier: S.C.A.T.

These SafetyCaps are designed to safely extract solvents when working with any HPLC/UHPLC system.

Supplier: S.C.A.T.

SCAT Safety waste caps are hermetically sealing caps for the safe disposal of solvents and HPLC waste.

Supplier: Bohlender

Cap made of PE-EX with pressed-in conical sealing plate made of static-dissipative PTFE-EX.

Supplier: Bohlender

Screw cap made of PPS for free movable GL 45 thread, insert made of PTFE. With PFA fittings for capillaries with Ext.Ø 1,6/2,2/3,2 mm (thread UNF ¼"), hose connector for tubings Int.Ø 6,5 to 8 mm (thread NPT ¹/₈"). Adapted to the installation on b.safe Desktop Mounts GL 45 or b.safe Multiports GL 45.

Supplier: Bohlender

To avoid spill over of canisters through the connection of a b.safe Control Waste Cap to a b.safe Display for electronic level control.

Supplier: Bohlender

To avoid spill over of canisters through the connection of a waste cap capacitive to a b.safe Display for electronic level control. With the use of b.safe waste tubes, solvent waste is led directly into the canister, solvent vapours are held back by the exhaust filter with activated carbon or can be led to the hood by means of a venting hose.

Supplier: S.C.A.T.

The SCAT SafetyCaps provide maximum safety for your HPLC solvent supply. Extract your solvents safely from bottles and reservoirs without being exposed to hazardous gases and solvent vapours. Complete with integrated air valve for pressure equalisation.

Supplier: S.C.A.T.

S.C.A.T. 'MARCO' V2.0 safety funnels can be closed safely and prevent danger of ignition.

Supplier: S.C.A.T.

The Safety Waste Caps LISA’s V3.0 high quality innovative docking system of the, is the latest generation of a modern and universally expandable modular system for the safe disposal of liquid HPLC / UHPLC waste. The disposal system offers a high number of individual threads, connections and expansion options.

Supplier: S.C.A.T.

We have put the most popular combinations together in our SCAT SafetyWasteSet V2.0.

Supplier: Bohlender

b.safe waste tubes can be connected to the canister by means of these b.safe system waste caps and solvents can be collected safely. Solvent vapours are held back by the exhaust filter with activated carbon or can be led to the hood by means of a venting hose.

Supplier: S.C.A.T.

Helpful supplies for the safe use of SCAT and SymLine products safety caps and safety waste caps.

Supplier: Bohlender

To prevent your waste canister from overflowing, connect these b.safe waste caps with electronic fill-level control to the alarm box. When the 'canister full' level is reached, you will receive an optical and acoustic warning. The alarm is triggered before your canister is completely full. This leaves a small safety buffer in the canister.