You searched for: Standards

Supplier: Restek

This MA fractionation surrogate spike mix contains two components: 2-Bromonaphthalene and 2-Fluorobiphenyl.

Supplier: Restek

This TNRCC 1005 retention time marker mix used during initial sample screening to determine retention time windows for each petroleum product.

Supplier: Restek

The mix consists of components such as 2-chlorophenol-d4 (1500 μg/ml), 1,2-dichlorobenzene-d4 (1000 μg/ml), 2-fluorobiphenyl (1000 μg/ml), 2-fluorophenol (1500 μg/ml), nitrobenzene-d5 (1000 μg/ml).

Supplier: Restek

The california oxygenates mix consists of five components they are tert-amyl methyl ether (TAME) 2000 μg/ml, tert-butanol (TBA) 10000 μg/ml, diisopropyl ether (DIPE) 2000 μg/ml, ethyl-tert-butyl ether (ETBE) 2000 μg/ml and methyl tert-butyl ether (MTBE) 2000 μg/ml.

Supplier: Restek

The alaska UST method consists of 14 components they are benzene, ethylbenzene, 1-ethyl-2-methylbenzene, 1-ethyl-3-methylbenzene, 1-ethyl-4-methylbenzene, isopropylbenzene (cumene), n-propylbenzene, toluene, 1,2,3-trimethylbenzene, 1,2,4-trimethylbenzene, 1,3,5-trimethylbenzene, m-xylene, o-xylene and p-xylene.

Supplier: CPACHEM

The colour standard is specially intended for use in testing ChP and monographs. This solution was produced according to the specifications using ChP reagent quality components and water meeting the ChP monograph requirement for purified water.

Supplier: Restek

Contains: Benzoic acid (65-85-0); 4-Chloro-3-methylphenol (59-50-7); 2-Chlorophenol (95-57-8); 2,4-Dichlorophenol (120-83-2); 2,6-Dichlorophenol (87-65-0); 2,4-Dimethylphenol (105-67-9); 4,6-Dinitro-2-methylphenol (Dinitro-o-cresol) (534-52-1); 2,4-Dinitrophenol (51-28-5); Dinoseb (88-85-7); 2-Methylphenol (o-cresol) (95-48-7); 3-Methylphenol (m-cresol) (108-39-4); 4-Methylphenol (p-cresol) (106-44-5); 2-Nitrophenol (88-75-5); 4-Nitrophenol (100-02-7); Pentachlorophenol (87-86-5); Phenol (108-95-2); 2,3,4,6-Tetrachlorophenol (58-90-2); 2,4,5-Trichlorophenol (95-95-4); 2,4,6-Trichlorophenol (88-06-2)

Supplier: LGC Standards PROMOCHEM

White cabbage (Trace elements), : N/A

Supplier: SI Analytics

ORP electrode solutions are used as cleaning solutions for combination electrodes and reference electrodes.

Supplier: Restek

Diesel fuel #2 composite and Motor oil.

Supplier: Restek

Contains two components, those are n-hexadecane and stearic acid.

Supplier: Restek

This MA fractionation check mix ideal for underground storage tank monitoring.

Supplier: Restek

The mix consists of, (C8) n-octane, (C10) n-decane, (C12) n-dodecane, (C16) n-hexadecane, (C21) n-heneicosane, (C34) n-tetratriacontane.

Supplier: Restek

GRO mix (EPA) with 9 components, includes benzene, 1, 2, 4-trimethylbenzene, ethylbenzene, 2, 2, 4-trimethylpentane, heptane, m-xylene, 2-methylpentane, o-xylene, toluene, in purge and trap methanol, 1 ml/ampule

Supplier: Restek

Haloethers calibration mix contains bis(2-chloroethoxy)methane, bis(2-chloroethyl)ether, 4-bromophenyl phenyl ether, 4-chlorophenyl phenyl ether, 2,2'-oxybis(1-chloropropane).

Supplier: Restek

612 Chlorinated hydrocarbons calibration mix contains 2-chloronaphthalene, 1,2-dichlorobenzene, 1,3-dichlorobenzene, 1,4-dichlorobenzene, hexachlorobenzene, hexachlorobutadiene, hexachlorocyclopentadiene, hexachloroethane, 1,2,4-trichlorobenzene.

Supplier: Restek

The MA VPH matrix spike mix consists of 14 components they are (C5) n-pentane, (C9) n-nonane, benzene, 2,5-dibromotoluene (SS), ethylbenzene, 2-methylpentane, methyl tert-butyl ether (mtbe), naphthalene, toluene, 1,2,4-trimethylbenzene, 2,2,4-trimethylpentane (isooctane), m-xylene, o-xylene and p-xylene.

Supplier: Advanced Instruments

Calibration standard is used to check the perforance of osmometer and test methods.

Supplier: CPACHEM

2×10 ml Potassium dichromate solution for absorbance control 235 - 350 nm and 6×10 ml

Supplier: CPACHEM

Holmium oxide solution for wavelength control acc. 2.2.25 of Ph Eur

Supplier: GONOTEC

Calibration standard, Osmolality: 300 mOsmol/kg, 10× 1 ml

Supplier: PerkinElmer

Perkalloy, three 50,8 mm pieces (596 °C)