You searched for: Chromatography Supplies

Supplier: VARIAN

SPME fibers are available in a range of chemistries, formats, and for use with autosamplers or manual injections.

Supplier: Agilent

The ISIS 3 dramatically increases the productivity of both the Agilent 7800 ICP-MS and the Agilent 7900 ICP-MS while also allowing high matrix samples to be run for extended periods of time.

Supplier: Agilent

These ion lenses are equivalent to the PerkinElmer ICP-MS versions for complete confidence.

Supplier: Agilent

These coils are equivalent to PerkinElmer ICP-MS coils for complete confidence.

Supplier: Agilent

Features and specifications for the Intuvo Guard Chips.

Supplier: Agilent

The Quick-Connect torch module for PerkinElmer ICP-OES includes the torch, mounting block, 2 mm alumina injector, Scott spray chamber, and Cross-Flow nebuliser.

Supplier: Agilent

These nebulisers for PerkinElmer AA systems provide the best precision, efficient drainage, minimal burner blockage, and reduced interferences.

Supplier: Agilent

Intuvo Flow Chips are modular, microfluidic components that create connections between the inlet, column, and detector(s) without the need for ferrules, and can be easily swapped in minutes.

Supplier: Agilent

Capillary column installation kit with diamond-tipped cutting pencil

Supplier: VARIAN

These deactivated injector liners are optimised for sensitive and reproducible analysis.

Supplier: Agilent

Nut, black, flangeless 10-32, 1/16”

Supplier: Agilent

The 4100/4200 Microwave plasma-atomic emission spectrometer runs entirely on air, which means your lab can eliminate flammable and expensive gases. It's safer and more cost efficient than other spectrometers. The 4100/4200 MP-AES enables superior detection and can perform unattended multi-element analyses.

Supplier: Agilent

Agilent burner chamber assemblies for PerkinElmer AA systems are designed to provide the best precision, efficient drainage, minimal burner blockage, and reduced interferences.

Supplier: Agilent

Agilent uses high-quality graphite and applies stringent quality controls to ensure contamination free and consistency of our contact cylinders for your PerkinElmer graphite furnace AA system. The standard THGA graphite contact cylinders, feature a modified injection port area that helps to minimise condensation and improve analytical performance with difficult matrices. The HGA contact cylinders have shaped graphite contacts to completely encase the graphite tube, ensuring the tube is positioned in a defined environment for uniform radiation conditions.

Supplier: Agilent

These graphite platforms and tubes for PerkinElmer graphite furnace AA systems are quality tested to ensure every batch passes our demanding performance specifications for contamination, sensitivity, precision, electrical resistance, and lifetime.

Supplier: Agilent

These hyperskimmer cones are equivalent to those from PerkinElmer ICP-MS for complete confidence.

Supplier: Agilent

These torch injectors for PerkinElmer ICP-MS are available in a wide range of types.

Supplier: Agilent

MP-AES Torches for the 4100/4200 Microwave Plasma-Atomic Emission Spectrometer.

Supplier: Agilent

RP syringe carriage

Supplier: Agilent

Clip, trap mounting, universal 35 - 41 mm Ext.Ø, For: LC/MS

Supplier: VARIAN

Graphite tubes are quality tested to ensure each batch passes our demanding performance specifications for contamination, sensitivity, precision, electrical resistance and lifetime.

Supplier: Agilent

High quality off-axis design ion lenses separate ions from photons and residual neutral material resulting in lower background noise in 7700/8800 ICP-MS systems.

Supplier: Agilent

These coils are equivalent to PerkinElmer ICP-OES coils for complete confidence.

Supplier: Agilent

Preventive maintenance kit for 1100/1200 and 1260 infinity LC prep pump

Supplier: VARIAN

The Merlin Microseal is available in standard and high pressure kits.

Supplier: Agilent

These alignment interfaces are an integral part of the Agilent diode-array detection system.

Supplier: Agilent

Clamp kit (includes needle clamp and 2×clamp screw)

Supplier: Restek

Sapphire piston

Supplier: Restek

Isolation seal, For: 7010

Supplier: Restek

Standard pump seal kit, For: 200 series