You searched for: Chromatography Supplies

Supplier: Agilent

CrossLab, Liner O-ring, graphite, splitless

Supplier: Agilent

These torch injectors for PerkinElmer ICP-MS are available in a wide range of types.

Supplier: Agilent

These hyperskimmer cones are equivalent to those from PerkinElmer ICP-MS for complete confidence.

Supplier: Agilent

These graphite platforms and tubes for PerkinElmer graphite furnace AA systems are quality tested to ensure every batch passes our demanding performance specifications for contamination, sensitivity, precision, electrical resistance, and lifetime.

Supplier: Agilent

MP-AES Torches for the 4100/4200 Microwave Plasma-Atomic Emission Spectrometer.

Supplier: Agilent

RP syringe carriage

Supplier: Agilent

Hydro moisture trap, refillable, 3,2 mm fittings, For: LC/MS

Supplier: VARIAN

Graphite tubes are quality tested to ensure each batch passes our demanding performance specifications for contamination, sensitivity, precision, electrical resistance and lifetime.

Supplier: Agilent

These nebulisers for PerkinElmer AA systems provide the best precision, efficient drainage, minimal burner blockage, and reduced interferences.

Supplier: Agilent

These graphite platforms and tubes for PerkinElmer graphite furnace AA systems are quality tested to ensure every batch passes our demanding performance specifications for contamination, sensitivity, precision, electrical resistance, and lifetime.

Supplier: Agilent

Agilent burner chamber assemblies for PerkinElmer AA systems are designed to provide the best precision, efficient drainage, minimal burner blockage, and reduced interferences.

Supplier: Agilent

A vacuum degasser is recommended for maximum sensitivity in the low UV wavelength range; high injection precision; high retention time reproducibility; and flow rates below 0,5 ml/min.

Supplier: Agilent

The mixing/separation assembly is a perfect match for your PerkinElmer FIMS/FIAS system.

Supplier: Agilent

These performance maintenance kits for Dionex HPLC systems contain all the normal wear parts, tools for disassembly/reassembly, and instructions necessary to keep your systems operating at peak performance.

Supplier: Agilent

All the parts required to connect solvent bottles to your HPLC instrument.

Supplier: Agilent

The kit contains needles, ferrule and a needle holder.

Supplier: Agilent

The 5100 ICP-OES features a plug and play torch, and a simple and effective torch-loader mechanism. This automatically aligns the torch and connects the gases to ensure fast start-up and reproducible performance.

Supplier: Agilent

The electron multiplier converts incident ions into an amplified electric current used to record measurements of the ion signal in ICP-MS Systems.

Supplier: Agilent

These support adaptors are fully compatible with your PerkinElmer ICP-OES.

Supplier: Agilent

Needle assembly, use with PEEK seat for standard autosampler

Supplier: Agilent

The key features of power amplifier tubes for PerkinElmer ICP-MS systems.

Supplier: Agilent

These sample loops are fully compatible with your PerkinElmer FIMS/FIAS systems, so can be confident that they will integrate seamlessly with PerkinElmer AA system.

Supplier: Agilent

The Quick-Connect torch module for PerkinElmer ICP-OES includes the torch, mounting block, 2 mm alumina injector, Scott spray chamber, and Cross-Flow nebuliser.

Supplier: Agilent

The ISIS 3 dramatically increases the productivity of both the Agilent 7800 ICP-MS and the Agilent 7900 ICP-MS while also allowing high matrix samples to be run for extended periods of time.

Supplier: Agilent

These ion lenses are equivalent to the PerkinElmer ICP-MS versions for complete confidence.

Supplier: Agilent

Filters for PerkinElmer ICP-OES systems.

Supplier: VARIAN

SPME fibers are available in a range of chemistries, formats, and for use with autosamplers or manual injections.

Supplier: VARIAN

Load and Lock 4003 column, spare parts kit

Supplier: Agilent

Needle seals, Valco, 22 gauge, PEEK

Supplier: VARIAN

RheBuild® kits containing genuine Rheodyne® parts are available for most Rheodyne® products. RheBuild® kits eliminate the need to order individual parts.