You searched for: Petroleum Industry Standards

Supplier: Restek

This consists of n-decane (C10), n-dodecane (C12), n-tetradecane (C14), n-hexadecane (C16), n-octadecane (C18), n-eicosane (C20) ,n-docosane (C22) , n-tetracosane (C24), n-hexacosane (C26), n-octacosane (C28), n-triacontane (C30) and n-dotriacontane (C32).

Supplier: Restek

It consists of benzene, 1,2-dibromoethane, 1,2-dichloroethane, ethylbenzene, isopropylbenzene (cumene), 2-methylnaphthalene, methyl tert-butyl-ether (MTBE), naphthalene, toluene, 1,2,4-trimethylbenzene, 1,3,5-trimethylbenzene, m-xylene, o-xylene and p-xylene.

Supplier: Restek

Fuel oil #4 is typically used in limited applications in which the fuel cannot be preheated prior to burning. The fuel is a blend of distillate (fuel oil #2) and residual (fuel oil #6).

Supplier: Restek

Standard contains benzene, 1,2-dibromoethane (EDB), 1,2-dichloroethane, ethylbenzene (100-41-4), isopropyl benzene (cumene), methyl tert-butyl ether (MTBE), naphthalene, toluene, m-xylene, o-xylene, p-xylene.

Supplier: Restek

The MA VPH matrix spike mix consists of 14 components they are (C5) n-pentane, (C9) n-nonane, benzene, 2,5-dibromotoluene (SS), ethylbenzene, 2-methylpentane, methyl tert-butyl ether (mtbe), naphthalene, toluene, 1,2,4-trimethylbenzene, 2,2,4-trimethylpentane (isooctane), m-xylene, o-xylene and p-xylene.

Supplier: Restek

The solvents consists of (C6) n-hexane (290 μg/ml), chloroform (60 μg/ml), 1,2-dimethoxyethane (100 μg/ml), 2-hexanone (50 μg/ml), nitromethane (50 μg/ml), pyridine (200 μg/ml), tetralin (100 μg/ml), trichloroethene (80 μg/ml).

Supplier: M S A

The gas mixture in calibration gas cylinder is certified to be prepared gravimetrically, using NIST traceable weights. The lot number and nominal value of the gas constituents in volume, percent by mass, PPM, or volume is specified on the cylinder.

Supplier: Restek

DRO mix (EPA/wisconsin) with 10 components, includes n-decane (C10), n-eicosane (C20), n-dodecane (C12), n-docosane (C22), n-tetradecane (C14), n-tetracosane (C24), n-hexadecane (C16), n-hexacosane (C26), n-octadecane (C18), n-octacosane (C28), with 2000 μg/ml each in methylene chloride in 1 ml/ampule

Supplier: LGC Standards PROMOCHEM

These standards are intended for use in the determination of fuel (diesel fuel or gasoline) in used engine oils by GC, IR, fuel dilution meter (fuel sniffer), or flash point analyser. They are prepared gravimetrically from well-characterised fuels and hydrocarbon oils, and are verified by GC-FID in accordance with ASTM Method D3524 or D3525.

Supplier: Restek

Subsurface degradation of fuel oil spills can be estimated by examining the ratios of C17/pristane and C18/phytane. To assist in identifying these four compounds from the complex fuel oil analysis, Restek offer a product that contains these compounds for retention time determination.

Supplier: Restek

The mix consists of (C5) n-pentane, (C9) n-nonane, (C10) n-decane, benzene, n-butylcyclohexane, 2,5-dibromotoluene (SS), ethylbenzene, 2-methylpentane, methyl tert-butyl ether, naphthalene, toluene, 1,2,4-trimethylbenzene, 2,2,4-trimethylpentane, m-xylene, o-xylene, p-xylene.

Supplier: Restek

The alaska UST method consists of 14 components they are benzene, ethylbenzene, 1-ethyl-2-methylbenzene, 1-ethyl-3-methylbenzene, 1-ethyl-4-methylbenzene, isopropylbenzene (cumene), n-propylbenzene, toluene, 1,2,3-trimethylbenzene, 1,2,4-trimethylbenzene, 1,3,5-trimethylbenzene, m-xylene, o-xylene and p-xylene.

Supplier: Restek

The mix consists of, (C8) n-octane, (C10) n-decane, (C12) n-dodecane, (C16) n-hexadecane, (C21) n-heneicosane, (C34) n-tetratriacontane, acenaphthene, acenaphthylene, anthracene, benz(a)anthracene, benzo(a)pyrene, benzo(b)fluoranthene, benzo(k)fluoranthene, benzo(ghi)perylene, chrysene, dibenz(a,h)anthracene, fluoranthene, fluorene, indeno(1,2,3-cd)pyrene, naphthalene, phenanthrene, pyrene.

Supplier: Restek

The MA VPH standard consists of 14 components they are (C5) n-pentane 1000 μg/ml, (C9) n-nonane 1000 μg/ml, benzene 500 μg/ml, 2,5-dibromotoluene (SS) 1000 μg/ml, ethylbenzene 500 μg/ml, 2-methylpentane 1500 μg/ml, methyl tert-butyl ether (MTBE) 1500 μg/ml, naphthalene 1000 μg/ml, toluene 1500 μg/ml, 1,2,4-trimethylbenzene 1000 μg/ml, 2,2,4-trimethylpentane (isooctane) 1500 μg/ml, m-xylene 1,000 μg/ml, o-xylene 1,000 μg/ml and p-xylene 1,000 μg/ml.

Supplier: Restek

D2887 calibration mix contains compound, conc.; (C6) n-hexane (110-54-3), 6% w/w; (C7) n-heptane (142-82-5), 6% w/w; (C8) n-octane (111-65-9), 8% w/w; (C9) n-nonane (111-84-2), 8% w/w; (C10) n-decane (124-18-5), 12% w/w; (C11) n-undecane (1120-21-4), 12% w/w; (C12) n-dodecane (112-40-3), 12% w/w; (C14) n-tetradecane (629-59-4), 12% w/w; (C16) n-hexadecane (544-76-3), 10% w/w; (C18) n-octadecane (593-45-3), 5% w/w; (C20) n-eicosane (112-95-8), 2% w/w; (c24) n-tetracosane (646-31-1), 2% w/w; (c28) n-octacosane (630-02-4), 1% w/w; (C32) n-dotriacontane (544-85-4), 1% w/w; (C36) n-hexatriacontane (630-06-8), 1% w/w; (C40) n-tetracontane (4181-95-7), 1% w/w; (C44) n-tetratetracontane (7098-22-8), 1% w/w.