You searched for: Petroleum Industry Standards
Developed to facilitate successful international trades, petroleum industry standards evaluate the properties of naturally occurring energy resources. Whether testing in refineries, processing plants, or production sites, the solutions ensure compliance requirements are always met. The liquids serve as the technical basis for safety level regulations and mitigating equipment failure risks. By enhancing operational excellence in machinery, the high quality petroleum industry standards inherently reduce any environmental impact and consumer costs.
Creosote oil standard
Supplier: Restek
This is for total petroleum hydrocarbon pattern recognition of creosote oil.
Expand 1 Items
Residual fuel oil - sulphur, NIST-1622E reference material
Supplier: LGC Standards PROMOCHEM
This reference standards are intended for use in the calibration of instruments and the evaluation of methods used in the determination of total sulphur in fuel oils and materials of similar matrix.
Expand 1 Items
Reference standard, water saturated octanol, NIST
Supplier: LGC Standards PROMOCHEM
NIST-2890, water saturated octanol, NIST
Expand 1 Items
Why Choose Corning Fetal Bovine Serum?
Our vertically integrated FBS serum supply chain, from collection to scientist, allows us to provide a consistent supply of FBS.
Elemental analysis standards, custom blend S-21+K, CONOSTAN
Supplier: LGC Standards PROMOCHEM
Custom blend S-21+K, CONOSTAN®, 885 ppm
Expand 1 Items
Biodiesel blank, VHG
Supplier: LGC Standards PROMOCHEM
This solution for using as calibration blank for biodiesel metals and sulphur analysis.
Expand 2 Items
DHA PiONA standard (133 components)
Supplier: Restek
This standard is produced for refineries performing Detailed Hydrocarbon Analysis (DHA) of crude oil feedstocks and fuels.
Expand 1 Items
Residual range calibration verification standard (CVS)
Supplier: Restek
SAE30 motor oil:SAE40 motor oil (1:1).
Expand 1 Items
Method 1664 oil and grease mix (2 components)
Supplier: Restek
Contains two components, those are n-hexadecane and stearic acid.
Expand 1 Items
UST Diesel surrogate standard
Supplier: Restek
Contains 1-chlorooctadecane.
Expand 1 Items
Gasoline component standard, 10 components
Supplier: Restek
Certified reference materials (CRMs) manufactured and QC-tested in ISO-accredited labs satisfy your ISO requirements.
Expand 1 Items
Gasoline Calibration Standard (2 Compound Mix) in Petroleum Ether
Supplier: REAGECON
Gasoline calibration standard (two compound mix) in petroleum ether is a ready to use standard used in fuel analysis as either a calibrant or analytical control solution. This standard is used in testing for a range of aromatic and oxygenate compounds in gasoline in accordance with the ASTM D5845, using infrared (IR) instrumentation. The product can also be used to validate appropriate test methods or qualify an instrument in a regulated industry. The product is QC tested on a high performance GC-MS.
Expand 1 Items
Fuel oil #6 standards
Supplier: Restek
A high-viscosity residual type of heavy fuel oil requiring preheating to 104 to 127 °C. This material is also known as residual fuel oil (RFO) or Bunker C.
Expand 3 Items
Weathered diesel fuel #2 kit
Supplier: Restek
The kit consists of different standards.
Expand 1 Items
DRO mix (Tennessee/Mississippi) (16 components)
Supplier: Restek
DRO mix (Tennessee/Mississippi), 1000 μg/ml each in methylene chloride, Pk Info: 1 ml/ampoule
Expand 1 Items
Biodiesel calibration standards
Supplier: Restek
The biodiesel component is methyl soyate.
Expand 9 Items
Glycols standard
Supplier: Restek
The glycol standard consists of two components they are ethylene glycol and propylene glycol.
Expand 1 Items
Gasoline fuel dilution standards, VHG
Supplier: LGC Standards PROMOCHEM
This standard is intended for use in the determination of gasoline in used gasoline engine oil by gas chromatography (GC), IR, fuel dilution meter (fuel sniffer) and flash point analyser.
Expand 1 Items
Reference materials, cloud point reference, VHG
Supplier: LGC Standards PROMOCHEM
These reference materials are intended for use in accordance with ASTM D2500 for the determination of the cloud point of petroleum products. The cloud point of a petroleum product is an index of the lowest temperature of their utility for certain applications.
Expand 1 Items
ASTM D2887-12 calibration standard (20 components)
Supplier: Restek
Designed to serve as a column resolution text mixture, as well as a calibration mixture for retention time (RT) versus boiling point (bp) calibration.
Expand 1 Items
Unleaded gasoline composite standards for UST monitoring
Supplier: Restek
Unleaded gasoline composite standards are comprised of three separate sources each of 87, 89, and 93 octanes blended in equal portions.
Expand 7 Items
Residual range calibration standard (RCS)
Supplier: Restek
SAE30 motor oil:SAE40 motor oil (1:1).
Expand 1 Items
Diesel fuel #2 composite standard
Supplier: Restek
Diesel fuel composite standards are comprised of three separate sources blended in equal portions. It may exhibit lot-to-lot variation.
Expand 2 Items
Reference materials, acid number standards, in hydrocarbon oil, VHG
Supplier: LGC Standards PROMOCHEM
These reference materials are intended for use in the determination of acid number (AN) in petroleum products in accordance with ASTM D664/IP 177 (by potentiometric titration) or ASTM D974 (by colour-indicator titration).
Expand 2 Items
Stoddard solvent standard
Supplier: Restek
Stoddard solvent, a petroleum distillate mixture of C7-C12 hydrocarbons, consists of three major groups of components: linear and branched alkanes-also known as paraffins (30 to 50%); cycloalkanes-also called cycloparaffins or naphthenes (30 to 40%); and aromatic hydrocarbons (10 to 20%).
Expand 1 Items
Aviation gas standard
Supplier: Restek
100-octane, low-lead fuel used in piston-type aircraft.
Expand 1 Items
NW TPH-HCID surrogate mix (2 components)
Supplier: Restek
The mix consists of (C25) n-pentacosane, 1-bromo-4-fluorobenzene (BFB).
Expand 1 Items
MA VPH surrogate standard (2,5-dibromotoluene)
Supplier: Restek
2,5-Dibromotoluene, 10000 µg/ml in P and T methanol, Pk Info: 1 ml/ampoule
Expand 1 Items
Reference materials, base number standards, in hydrocarbon oil
Supplier: LGC Standards PROMOCHEM
These reference materials are intended for use in the determination of base number (AN) in petroleum products in accordance with ASTM D2896/IP 276 (by potentiometric perchloric acid titration) or ASTM D4739 (by potentiometric titration).
Expand 13 Items
Gasoline Calibration Standard (3 Compound Mix) in Petroleum Ether
Supplier: REAGECON
Gasoline calibration standard (three compound mix) in petroleum ether is a ready to use standard used in fuel analysis as either a calibrant or analytical control solution. This standard is used in testing for a range of Aromatic and oxygenate compounds in gasoline in accordance with the ASTM D5845, using infrared (IR) instrumentation. The product can also be used to validate appropriate test methods or qualify an instrument in a regulated industry. The product is QC tested on a high performance GC-MS. This product is prepared gravimetrically on a weight/volume basis to a specification of ±2.5%
Expand 1 Items
DRO/ORO calibration standard
Supplier: Restek
This consists of 10W30 motor oil:diesel fuel #2 (1:1 blend).
Expand 1 Items
Supplier: EPPENDORF
Supplier: Integra
Supplier: OZ BIOSCIENCES
Supplier: VWR Collection
Supplier: Corning
Supplier: SenseAnywhere
Supplier: Integra
Supplier: NANOENTEK
Supplier: VWR Collection
Supplier: Integra
Supplier: TESTO
Supplier: Sartorius
Supplier: SenseAnywhere
Supplier: Quantabio