You searched for: Organic Standards

Supplier: Restek

Consists of eight components, those are 2,4-db, 3,5-dichlorobenzoic acid, dinoseb, MCPA, MCPP, 4-nitrophenol, pentachlorophenol and 2,4,5-t.

Supplier: Restek

The mixture consists of benzene (2 μg/ml), chloroform (60 μg/ml), 1,4-dioxane (380 μg/ml), methylene chloride (dichloromethane) (600 μg/ml) and trichloroethene (80 μg/ml).

Supplier: Restek

The mixture consists of benzene (2 μg/ml), chloroform (60 μg/ml), 1,4-dioxane (380 μg/ml), methylene chloride (dichloromethane) (600 μg/ml) and trichloroethene (80 μg/ml).

Supplier: LGC Standards PROMOCHEM

Organic Standard, Clobetasol (21-Chloro-9-fluoro-11b,17-dihydroxy-16b-methylpregn-4-ene-3,20-dione 17-Propionate)

Supplier: Restek

This mix contains 20 components.

Supplier: Restek

Chlordane and toxaphene standards may exhibit lot-to-lot variation.

Supplier: Restek

Mix contains: 1,2-Dibromo-3-chloropropane (DBCP) (96-12-8), 1,2-Dibromoethane (EDB) (106-93-4).

Supplier: Restek

This butyltin chloride calibration mixture contain four components: n-Butyltin trichloride, Dibutyltin dichloride, Tetrabutyltin, Tributyltin chloride.

Supplier: Restek

The Rxi test mix consists of eight components, they are (C9:0) methyl nonanoate, (C13) n-tridecane, (C15) n-pentadecane, acenaphthylene, 4-chlorophenol, n-decylamine, 1,6-hexanediol and 1-undecanol.

Supplier: Restek

Prepared from an equal-volume blend of 5W30, 10W30, 10W40, and 20W50 motor oils. After blending, a precisely weighed amount of the composite is added to a volumetric flask to produce the standard.
Motor Oil standards may exhibit lot-to-lot variation.

Supplier: Restek

TCLP acid mix contains 2-methylphenol (o-cresol), 3-methylphenol (m-cresol), 4-methylphenol (p-cresol), pentachlorophenol, 2,4,5-trichlorophenol, 2,4,6-trichlorophenol.

Supplier: Restek

Contains 16 components, those are acifluorfen, bentazon, chloramben, 2,4-d, dalapon, 2,4-db, dcpa diacid, dicamba, 3,5-dichlorobenzoic acid, dichlorprop, dinoseb, pentachlorophenol, picloram, quinclorac, 2,4,5-t and 2,4,5-tp.

Supplier: Restek

The mix consists of bromochloroacetic acid, dibromoacetic acid, dichloroacetic acid, monobromoacetic acid, monochloroacetic acid, trichloroacetic acid.

Supplier: Restek

Mix contains: Allyl alcohol (2-propen-1-ol) (107-18-6); 2-Chloroethanol (107-07-3); Ethanol (64-17-5); Isobutyl alcohol (78-83-1); Propargyl alcohol (107-19-7).

Supplier: Restek

Mix contains: Benzene (71-43-2); Ethylbenzene (100-41-4); Methyl tert-butyl ether (MTBE) (1634-04-4); Toluene (108-88-3); m-Xylene (108-38-3); o-Xylene (95-47-6); p-Xylene (106-42-3).

Supplier: Restek

Contains eight components, those are diflubenzuron, diuron, fluometuron, linuron, propanil, siduron, tebuthiuron and thidiazuron.

Supplier: Restek

The solvents consists of five components, they are benzene (10 mg/ml), carbon tetrachloride (20 mg/ml), 1,2-dichloroethane 25 mg/ml, 1,1-dichloroethene (40 mg/ml), and 1,1,1-trichloroethane (50 mg/ml).

Supplier: Restek

The mix consists of, bromochloroacetic acid (400 μg/ml), bromodichloroacetic acid (400 μg/ml), chlorodibromoacetic acid (1000 μg/ml), dibromoacetic acid (200 μg/ml), dichloroacetic acid (600 μg/ml), monobromoacetic acid (400 μg/ml), monochloroacetic acid (600 μg/ml), tribromoacetic acid (2000 μg/ml), trichloroacetic acid (200 μg/ml)

Supplier: Restek

SV calibration mix #2 contains benzoic acid, 4-chloro-3-methylphenol, 2-chlorophenol, 2,4-dichlorophenol, 2,4-dimethylphenol, 4,6-dinitro-2-methylphenol (Dinitro-o-cresol), 2,4-dinitrophenol, 2-methylphenol (o-cresol), 4-methylphenol (p-cresol), 2-nitrophenol, 4-nitrophenol, pentachlorophenol, phenol, 2,4,5-trichlorophenol, 2,4,6-trichlorophenol.

Supplier: Restek

SV calibration mix contains bis(2-chloroethoxy)methane, bis(2-chloroethyl)ether, bis(2-ethylhexyl)phthalate, 4-bromophenyl phenyl ether, benzyl butyl phthalate, 2-chloronaphthalene, 4-chlorophenyl phenyl ether, dimethylphthalate, di-n-butylphthalate, di-n-octylphthalate, N-nitrosodimethylamine, N-nitroso-di-n-propylamine, N-nitrosodiphenylamine, 2,2'-oxybis(1-chloropropane).

Supplier: LGC Standards PROMOCHEM

Organic Standard, Dinoseb (2-sec-Butyl-4,6-dinitrophenol) 500 µg/ml in methanol, Pack type: Glass bottle

Supplier: LGC Standards PROMOCHEM

Organic Standard, 5-[4'[[2-Butyl-4-chloro-5-[[(1-methylethyl)oxy]methyl]-1H-imidazol-1-yl]methyl]biphenyl-2-yl]-1H-tetrazole

Supplier: LGC Standards PROMOCHEM

Organic Standard, 5-[4'-[[2-Butyl-4-chloro-5-[[(triphenylmethyl]oxy]methyl]-1H-imidazol-1-yl]methyl]biphenyl-2-yl]-1H-tetrazole

Supplier: Restek

Single-component explosives solutions supports US department of defense base closures and remediation.

Supplier: Restek

The VOA internal standard/SMC spike mix consists of 6 components, they are bromochloromethane,1-bromo-4-fluorobenzene (BFB), chlorobenzene-d5, 1,2-dichloroethane-d4, 1,4-difluorobenzene and toluene-d8.

Supplier: LGC Standards PROMOCHEM

Organic Standard, Di-n-octyl phthalate-[ring-D4] 100 µg/ml in n-nonane (98% D), Pack type: Glass bottle

Supplier: Restek

This mix contains four components.

Supplier: Restek

This mix contains eight components.

Supplier: LGC Standards PROMOCHEM

Organic Standard, 2-[[2-[[(4RS)-4-(2-Chlorophenyl)-3-(ethoxycarbonyl)-5-(methoxycarbonyl)-6-methyl-1,4-dihydropyridin-2-yl]methoxy]ethyl]carbamoyl]benzoic acid

Supplier: Restek

The mix consists of chloroform (60 μg/ml), 1,4-dioxane (380 μg/ml), methylene chloride (dichloromethane) (600 μg/ml) and trichloroethene (80 μg/ml).