You searched for: Fittings and Connectors

Supplier: Restek

These Luer lock valve adaptors are suitable for connecting a Luer lock fitting to a Rheodyne or Valco valve.

Supplier: Cole-Parmer

Cleanroom female Luer to hose barb fittings, straight adapter, ideal for general-purpose, laboratory, and single-use applications to connect tubing with the rest of system.

Supplier: Restek

Double connectors are used to effectively connect any click-on trap to a click-on indicator.

Supplier: UPCHURCH SCIENTIFIC

These fittings eliminate loosening due to tubing twist.

Supplier: Restek

These are used to cap off a detector and prevent hydrogen from accidentally diffusing into the oven from an unused detector base.

Supplier: Restek

Internal tees are made of stainless steel are used to connect three lines. Suitable for 1,6 mm OD tubing.

Supplier: VICI JOUR RESEARCH

Connectors for low pressure applications are machined from PEEK.

Supplier: Restek

Graphite two-piece construction. For Shimadzu 17A, 2010, and 2014 GCs.

Supplier: VICI JOUR RESEARCH

These fingertight PP adapters are used with ¹/₄" PEEK and stainless hex-head nuts, converting them into colour coded fingertight fittings.

Supplier: UPCHURCH SCIENTIFIC

These low pressure unions are made from PEEK, ETFE, Delrin or PP.

Supplier: UPCHURCH SCIENTIFIC

PEEK polymer adapters connect peristaltic tubing to standard rigid or semi-rigid tubing.

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific®, P-482T-01, flanged nut, ETFE natural, for 1/16" OD tubing, ETFE

Supplier: VICI JOUR RESEARCH

PEEK with titanium filter element.

Supplier: VICI JOUR RESEARCH

These plugs and caps are used for plugging ports and capping solvent lines.

Supplier: UPCHURCH SCIENTIFIC

VHP Microferrules are made from a proprietary high performance PEEK polymer blend, a material which is unique in its ability to enable the use of capillary tubing in UHPLC environments.

Supplier: VICI JOUR RESEARCH

Adapter, connects safety exhaust filter to SCAT® waste caps and A.I.T. smart waste caps

Supplier: Restek

Internal uniona are made of 300 series stainless steel with end of tubing that seats squarely at bottoms of fitting details. Suitable for 1,6 mm OD tubing.

Supplier: UPCHURCH SCIENTIFIC

PEEK or PCTFE.

Supplier: Restek

Swagelok®, Reducing union, 1/8 to 1/16", Brass

Supplier: Restek

These nuts are designed for Agilent 5890/6850/6890/7890 GCs. Nuts for use with standard ¹/₁₆" type ferrules are designed to fit a wider variety of ¹/₁₆" ferrules.

Supplier: Restek

These non-reusable column caps increase column lifetime, prevent moisture and air from entering the column during storage.

Supplier: Restek

This conversion fitting is a flat, soft aluminum sealing ring deforms and butt-seals against the MSD interface. A standard Vespel® ferrule seals the column and 1,59 mm stainless steel nut.

Supplier: Restek

GRAPHPACK® technology provides a complete system that quickly and reliably makes a leak-tight, low-dead-volume connection.

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific® MicroTight®, F-126S, fitting, standard micro knurl, PEEK red, 6-32 coned port, for 1/32" OD tubing, 5000 psi, PEEK

Supplier: VICI JOUR RESEARCH

PEEK tees and crosses, high pressure, for easy connection of solvent lines.

Supplier: UPCHURCH SCIENTIFIC

PEEK or stainless steel.

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific®, U-650, replacement flangeless ferrule, ETFE natural, 1/2-20 flat bottom port, 250 psi, for 1/4" OD tubing, ETFE

Supplier: UPCHURCH SCIENTIFIC

This micro injection port adapter assembly can be connected to 360 µm Ext.Ø capillary tubing to introduce samples. It accepts standard 22 gauge Hamilton-style injection syringe needles. The needle butts directly against the connecting tubing during injections, therefore no additional swept volume is added to the fluid pathway by this adapter.

Supplier: Restek

Internal adapter made of stainless steel gives minimum volume connection from a female pipe fitting on a pressure gauge or regulator to a Valco® zero-dead-volume fitting.

Supplier: Restek

These septum nuts are made of high-quality stainless steel and for use with Agilent 5890/6850/6890/7890 split or splitless injectors.