You searched for: Shakers

Supplier: VWR Collection

Ideal for molecular biology applications, mechanical and chemical cell lysis, mixing tissue samples, mixing cytogenetic suspensions, and vortexing cell suspensions. Shaker is also ideal for emulsification of bi-polar viscous fluids and for mixing fluids in small diameter tubes. Specifically designed to shake and/or vortex microplates in timed or continuous modes. Shaker features programmable timed mode from 1 s to 160 hours. Speed and time are easily adjusted with the up/down arrows on the front panel.

Supplier: VWR Collection

The Mini blot shaker combines the actions of a rocker and a shaker to produce a three-dimensional motion that is gentle enough for fragile gels and blots, yet provides thorough mixing.

Supplier: VWR Collection

These electromagnetically-driven test sieve shakers are designed for sieve analysis with optimum three-dimensional sieving action. The self-re-adjusting amplitude, which uses permanent acceleration measurement of the whole sieve tower, balances the oscillation of the shaker and its stand. This guarantees that amplitude stays the same, irrespective of the feed quantity and the installation position.

Supplier: VWR Collection

Microplate shaker with microprocessor control which holds two or four microplates, deep well plates or two microtube racks. Variable speed across a wide range may be adjusted to suit the application; a low speed ensures that the well contents are not ejected, more vigorous agitation provides effective aeration across the small surface area of each of the wells. Ideal for use in immunology, biotechnology, microbiology and pharmacology applications.

Supplier: VWR Collection

A compact, powerful mini shaker with microprocessor control that is ideal for a wide variety of shaking applications. The unit has optimal speed range and orbit for larger samples. Variable speed control provides consistent, uniform shaking action. The speed is adjustable in 1 min⁻¹ increments throughout the speed range. Ramping feature slowly increases speed to desired set point to avoid splashing.

Supplier: VWR Collection

For dry sieving. Tyler Ro-Tap® shakers RX 29 CE and RX 30 CE reproduce the circular and tapping motion of hand sieving, but in a repeatable mechanical action. This sieve shaker makes a circular movement of the sieve stack and a mechanical arm makes a tapping movement on the top of the sieve stack, thus creating a perfect and repeatable imitation of hand shaking with additional tapping of the sieve on the side. They are operated in a totally enclosed cabinet, which guarantees the safety of the operator, and reduces the sound emissions significantly.

Supplier: VWR Collection

Digital shaker with microprocessor control which is ideal for a range mixing applications, e.g. solubility studies and extraction procedures. Variable speed control provides consistent, uniform shaking action. The shaking system continuously monitors shaking speed and will maintain the set point even under changing loads.

Supplier: VWR Collection

Rocking platform shakers have variable speed and adjustable tilt to provide optimum control of mixing conditions, a gentle wave motion is ideal for blotting membranes and gels. Shakers maintain constant speed regardless of load or voltage fluctuations. Durable shakers with choice of models with single- or double-tiered stainless steel platforms.

Supplier: VWR Collection

For test sieves up to 400 mm diameter or square sieves up to 500×500 mm. The UWL 400 is an efficient test sieve shaker that achieves optimum results for large feed quantities. It creates a three-dimensional sieving action, and is especially designed for coarse grained products. The UWL 400 T is suitable for dry sieving; the UWL 400 N is suitable for wet sieving, and the UWL 400 H is suitable for square test sieves with beechwood frames.

Supplier: Heidolph Instruments GmbH & Co.KG

For vigorous mixing of microtitre plates. Vibration orbit of 1,5 mm guarantees no spills even with full vessels, 3 mm orbit gives best mixing results even with the smallest quantities. The shakers are designed for continuous operation and feature over-temperature protection, and an insulated platform with virtually no heat-up.

Supplier: VWR Collection

General purpose shaker with microprocessor control which is ideal for basic mixing applications, bacterial suspensions, staining and destaining. Variable speed control provides consistent, uniform shaking action. The speed is adjustable via knob with 1 to 10 dial settings and the ramping feature slowly increases speed to the set point for added safety.

Supplier: VWR Collection

The EML 200 series offers different types of units. All models are suitable for 50 to 203 mm Ø sieves, a maximum sample/batch load of 3 kg, and have a cast aluminium housing and improved clamping system.

Supplier: SCIENTIFIC INDUSTRIES ELMIS

Fully programmable microplate shaker for four plates (8 with optional tray).

Supplier: GRANT INSTRUMENTS

Compact microplate shaker which provides reliable and regulated shaking for 96- and 384-well microplates with easy set up and digital timer. Variable speed across a wide range may be adjusted to suit the application: A low speed ensures that the well contents are not ejected, more vigorous agitation provides effective aeration across the small surface area of each of the wells. Simple screw attachments allow quick and easy fitting of any standard depth plates, holding the plates securely in place. Ideal for use in immunology, biotechnology, microbiology and pharmacology applications.

Supplier: VWR Collection

Rocking platform shaker with low profile design can be used in most fume hoods and incubators. The cast aluminium base offers durability and stability, the spill resistant design channels fluids away from internal components. Precise speed control provides smooth, low speed rocking motion down to one min⁻¹.

Supplier: VWR Collection

General purpose shaker with microprocessor control which is ideal for a range of mixing applications. Variable speed control provides consistent, uniform shaking action. The speed is adjustable in 10 min⁻¹ increments up to 500 min⁻¹, and increments of 25 min⁻¹ up to 1200 min⁻¹. The ramping feature slowly increases speed to the set point for added safety.

Supplier: VWR Collection

Digital shakers with microprocessor control which are ideal for mixing applications with very heavy loads and larger vessels, e.g. cell cultures, solubility studies and extraction procedures. Variable speed control provides consistent, uniform shaking action. The Accu-drive shaking system delivers exceptional speed control, accuracy, safety and durability, the system continuously monitors shaking speed and will maintain the set point even under changing loads.

Supplier: GRANT INSTRUMENTS

The CPS-20 is a CO₂ resistant shaker providing regulated orbital motion and designed for use specifically in CO₂ incubators.

Supplier: VWR Collection

Heavy duty shaker with microprocessor control which is ideal for mixing applications with heavy loads, e.g. bacterial suspensions, staining and destaining. Variable speed control provides consistent, uniform shaking action. The speed is adjustable via knob with 1 to 10 dial settings and the ramping feature slowly increases speed to the set point for added safety.

Supplier: IKA

Microplate shaker with electronic control keeps the set speed constant via rated/actual speed comparison. Supplied with attachment but without microtiter plate.

Supplier: VWR Collection

Digital shaker with microprocessor control which is ideal for mixing applications with heavy loads, e.g., cell cultures, solubility studies and extraction procedures. Variable speed control provides consistent, uniform shaking action. The Accu-drive shaking system delivers exceptional speed control, accuracy, safety and durability, the system continuously monitors shaking speed and will maintain set point even under changing loads.

Supplier: Thermo Fisher Scientific

MaxQ™ HP benchtop orbital shaker suitable for environmental rooms or on lab benches. It features balancing technology and rugged mechanism make smooth high-capacity 24/7 shaking a reality, an industry-leading platform size, wide-range speed, low heat output motor and spill-resistant design. It features set point security which restricts unauthorised or inadvertent changes to key functions. Equipped with alarm to know the shaker performance.

Supplier: VWR Collection

High reproducibility and comparability.

Supplier: VWR Collection

High reproducibility and comparability.

Supplier: IKA

Compact flat shakers with electronic adjustment of speed and timer. Control model has RS232 analogue interface, integrated end point positioning for automated robot controlled sampling and all functions can be controlled and documented with optional labworldsoft® software.

Supplier: VWR Collection

General purpose shaker with microprocessor control which is ideal for basic mixing applications, blotting techniques, staining and destaining. Variable speed control provides consistent, uniform shaking action. The speed is adjustable via knob with 1 to 10 dial settings and the ramping feature slowly increases speed to the set point for added safety.

Supplier: VWR Collection

Digital shaker with microprocessor control which is ideal for a range mixing applications, e.g. cell cultures, solubility studies and extraction procedures. Variable speed control provides consistent, uniform shaking action. The Accu-drive shaking system delivers exceptional speed control, accuracy, safety and durability; the shaking system continuously monitors shaking speed and will maintain the set point even under changing loads.

Supplier: Heidolph Instruments GmbH & Co.KG

Promax shakers have a one dimensional back and forth motion for vigorous mixing of flasks and separating funnels in chemical applications, using analogue dial controls for reciprocating frequency. The encapsulated housing ensures virtually no heat transfer from motor to platform and a sealed drive is isolated from spills.

Supplier: IKA

Compact flat shakers with electronic adjustment of speed and timer. Control model has an RS232/analogue interface and integrated end point positioning for automated robot-controlled sampling, and all functions can be controlled and documented with optional labworldsoft® software.

Supplier: IKA

Low profile laboratory shaker with digital display and a large platform. Continuous operation is guaranteed even under extreme loads. Suitable for vessels which need to be laid flat, for example separating funnels. A variety of different vessels can be accommodated by choosing from the range of optional holding attachments.