You searched for: Storage Cabinets

Supplier: asecos

Recirculating air filter system UFA.20.30
Avoid complex wall, ceiling and roof penetrations and costly extract systems. Safe capturing of escaping vapours at the point where they are released or produced.
High flexibility in choosing the installation location
Active personal protection through safe capture of harmful vapours with retention in the filter system
Very low noise, ~39 dB(A)
ATEX complient: CE II 3/-G Ex ic nA IIB T4 Gc
Housing made of sheet-steel plastic laminated
With multistage filter system and power cord
Incl. VDE tested extraction and filter monitoring
Optical and acoustical alarm including potential-free alarm contact
Dimensions W×D×H: 305×555×210 mm
The plug-in recirculating air filter system UFA.20.30 is capable of retaining solvent vapours (hydrocarbons) permanently up to a filter saturation of more than 99,999%, under normal operating conditions as well as for a simulated accident in the safety storage cabinet.
A special version of the recirculating air filter system UFA.20.30-AUS is also available to meet the pressure conditions and volumetric flows of safety storage cabinets with a small internal volume. It can be installed on a wall bracket or in a convenient housing unit.

Supplier: LEICA HISTOLOGY

These block banks are ideal for the long-term storage of paraffin blocks. These rigid steel cabinets will stack together or with the slide safe.

Supplier: CEMO

Environmental/HazMat cabinet serves for safe storage of water and environmentally polluting substances within buildings.

Supplier: CEMO

These environmental/HazMat cabinet 13/20, based on the drum rack 540 serves for storage of environmentally harmful substances such as pesticides, lubricants, etc. The surface of cabinet casing is sealed with a high quality powder coating (RAL 7035 light grey).

Supplier: Lovibond

The cabinet consist of a sturdy sheet steel housing with impact-proof and jolt-resistant powder coating. Improved, robust, insulated housing and highly efficient components provide maximum energy efficiency. The robust interior is made of high-quality, strong white plastic material (PS). The door is lockable and supplied with a right-hand hinge as standard (but can easily be converted to a left-hand hinge). A tight door seal is ensured by an all-round magnetic gasket.

Supplier: Hettich

Storage cabinet, Mobile cabinet, low and wide with 1 drawer, 770×650×260 mm

Supplier: TEKNOMEK

Our storage cupboard comes complete with an internal lockable cabinet.

Supplier: TEKNOMEK

High quality lockable storage cabinet for knives.

Supplier: TEKNOMEK

Our janitorial cupboard with solid door is ideal storage for cleaning products and equipment.

Supplier: TEKNOMEK

This heavy duty mobile stainless steel tool cabinet with 3, 4 or 11 drawers has a brushed dull polish finish is excellent for tool storage within the workplace. With a floor clearance of 100 mm, there is plenty of room for a mop or broom for easy cleaning below the tool cabinet.

Supplier: TEKNOMEK

Our floor cupboards come in a range of sizes.

Supplier: TEKNOMEK

Stainless steel cupboards 304-grade, with a range of door options ensure robustness, hygiene and ease of cleaning. Designed with hygeine first!

Supplier: TEKNOMEK

Our storage cupboard comes complete with four drawers to provide perfect storage.

Supplier: TEKNOMEK

304 grade stainless steel add on unit for rear railed workbench is perfect for adding additional storage. Cannot be sold singly.

Supplier: TEKNOMEK

Our garment cupboard comes complete with hanging rail.

Supplier: KLINIPATH

Heavy duty synthetic storage cabinet for blocks.

Supplier: LABCONCO

These cabinets support fume hoods and safely store and vent solvents and other flammable liquids. The contents inside them are also protected during any fire case.

Supplier: JUSTRITE MANUFACTURING

Store acids or bases in a completely metal-free countertop polyethylene cabinet - never worry about corrosion again.

Supplier: TRESTON

Cabinets, which combine a stylish industrial design with practical accessories to provide flexible and efficient small parts storage. The 550 cabinet is designed with strong, dark grey (RAL 7016) polypropylene frame and galvanised steel shelves and ideal for small drawers of crystal clear polystyrene sit securely within the framework.

Supplier: LABCONCO

These cabinets support fume hoods and safely store and vent acids and also other corrosive liquids.

Supplier: EQUIP LABO

Cabinets in melamine with a super-agglomerate face. Grey finish with white handles. Metal base with adjusting cylinder.

Supplier: TRESTON

Drawer units 75 series designed for storing lightweight items, in environments such as light assembly, inspection, or testing laboratory. These units equipped with base for stand alone version and casters for mobile version.

Supplier: JUSTRITE MANUFACTURING

Sturdy solid wall and chemically resistant polyethylene construction with sealed sump is suitable for highly aggressive liquids.

Supplier: KLINIPATH

Every laboratory has its specific needs and demands to handle slide and cassette storage. For high volume storage of slides and/or cassettes we offer various types of cabinets with drawers and inserts adapted to specific needs.
Complete cabinets for cassettes and slides, including cassette boxes or slide inserts.

Supplier: TRESTON

Drawer units 75 series designed for storing lightweight items, in environments such as light assembly, inspection, or testing laboratory. These units equipped with base for stand alone version and castors for mobile version.

Supplier: KLINIPATH

Stackable, universal storage system for preparations and blocks. A complete system with growth potential. A modular system able to transform local storage in a laboratory into a long-term storage system. A growth system with easy exchangeable and removable plastic trays.

Supplier: TRESTON

Drawer unit 45 is designed for storing lightweight items, in environments such as light assembly, inspection, or testing laboratory with all the drawer units have central locking.

Supplier: 3B Scientific

Storage cabinet, Steel safe for theft proof storage of radioactive materials in accordance with radiation protection requirements, Doors: 1, W×D×H: 300×140×360 mm, 3 kg