Supplier: Showa

Butyl rubber gloves provide superior resistance to highly corrosive acids and are excellent for handling ketones and esters. Synthetic rubber also provides the highest permeation resistance to gases and water vapours, but does not offer the physical strength of natural rubber.

Supplier: Showa

These hand-specific cotton gloves with latex coating on palm and fingertips are flexible and robust offering great dexterity, outstanding grip and good resistance to tearing. They are ideal for heavy duty manual handling.

Supplier: SEMPERIT TECHN PROD

These ambidextrous disposable nitrile gloves protect against chemical splashes, grease, oils and other skin irritants. They are ideal for use in the processing of fatty foods.

Supplier: Showa

Built to stay flexible in temperatures as low as −4 °F/−20 °C, the 460 cold resistant glove provides superior warmth in cold weather.

Supplier: Showa

These hand-specific gloves with nitrile coating are engineered to endure as they combine Kevlar® cut-resistance with oil grip to deliver cut, abrasion and flame resistance, without sacrificing comfort or grip.

Supplier: Showa

The new SHOWA AX200 has an 18-gauge seamless knit, with nylon static dissipative yarn. It is free of natural rubber latex and is touchscreen compatible, silicone-free and fingerprint-free.The AX200 by SHOWA meets the requirements for electrostatic properties (ESD).

Supplier: Showa

These thin, light gloves with butyl coating protect the hand from a wide array of chemical hazards. Available with a smooth finish or with a rough finish on the fingertips.

Supplier: HONEYWELL SAFETY

Knitted glove made of 100% black polyester with black polyurethane coating on palm and fingertips. The polyester and its polyurethane coating provide good abrasion and tear resistance.

Supplier: Showa

These gloves with rolled cuffs and smooth finish are made of unsupported Viton and a butyl coating. They protect the hands from a wide array of chemical hazards.

Supplier: HONEYWELL SAFETY

These knitted gloves in polyamide/HPPE fibres/elastane and glass fibres (outside) feature a green PU coating on the palm. Ideal for handling sharp parts in an oily or greasy environment.

Supplier: Showa

These extremely lightweight hand-specific Hagane Coil®/Kevlar® gloves feature a microporeus foam nitrile coating, provide level 5-E cut resistance and naturally fits the anatomy of your hand for maximum precision.

Supplier: Showa

These seamless knitted HPPE liners with PU coating on palm and fingers provide a high degree of comfort when performing delicate tasks in greasy work environments with a high risk of cuts.

Supplier: Showa

The 650 chemical resistant glove offers anti-odour and antibacterial protection as well as a moisture-wicking soft cotton liner.

Supplier: HONEYWELL SAFETY

These natural latex gloves offer high dielectric characteristics. The thickness (from 1,7 to 1,8 mm) ensures good protection from 500 to 17000 volts.

Supplier: HONEYWELL SAFETY

These 100% polyamide knitted liners feature a latex coating which offers good mechanical and chemical resistance against detergents and liquid products. It also resists acids and bases. The glove's crepe finish helps to improve the grip on slippery parts (tailored for the fishing trades).

Supplier: Showa

These non woven liners with full neoprene coating protect the hand against hot temperatures and abrasion while providing a good grip.

Supplier: HONEYWELL SAFETY

These unsupported butyl gloves offer resistance to many solvents, acids and medium concentrated bases as well as to ozone and heat. They are also gas tight.

Supplier: Showa

This soft, cotton flannel liner with natural rubber coating and wrinkle finish provides superior cut, abrasion, snag, and puncture resistance.

Supplier: Showa

Designed to keep hands warm and dry in the most extreme environments, the 477 cold resistant glove combines thermal insulation with tactical grip. Foam grip and a dual nitrile coating ensure precision in wet and oily environments, whilst the acrylic liner provides protection from cold weather.

Supplier: Showa

These nitrile foam Hi-Vis anti-impact gloves have a highly protective design to prevent injuries caused by impact and other hazards. The SHOWA-configured Thermo Plastic Rubber (TPR) shields to the back of the fingers and hand are designed to bolster protection against crushes and impacts.

Supplier: Showa

The unsupported neoprene over natural rubber gloves are resistant to acids, alcohols, oils, caustics, animal fats and petroleum based solvents.

Supplier: HONEYWELL SAFETY

These polyamide/HPPE fibres/elastane knitted gloves with PU coating on palm and fingertips provide cut and puncture resistance. Ideal for use when handling sharp parts in a dry or greasy environment.

Supplier: Showa

These breathable, waterproof and insulated PU coated gloves provide warmth and protection from liquids in cold conditions.

Supplier: HONEYWELL SAFETY

These nitrile dipped gloves with cotton flock lined interior are particularly suitable for handling oils, fats and hydrocarbon derivatives.

Supplier: HONEYWELL SAFETY

These gloves are particularly resistant to animal fat and detergents. They also offer good mechanical resistance, making it an economical alternative to the traditional reusable model. They are ideal for food preparation of greasy products (cooked dishes, pastries, and more.) and cleaning applications in contact with oils, animals and vegetable fat.

Supplier: Showa

These fully nitrile coated gloves are either available with cotton flock lining or without lining. They protect hands from oils, hydrocarbons, grease and abrasion, while providing an effective long lasting grip.

Supplier: HONEYWELL SAFETY

These dipped latex gloves with cotton flock interior provide good mechanical and chemical resistance against detergents and liquid products.

Supplier: HONEYWELL SAFETY

This durable glove made from neoprene provides protection against a wide range of chemical products (detergents, some solvents, acids and bases).

Supplier: Portwest

The extended length (480 mm) nitrile gauntlet offers excellent protection against many solvents.

Supplier: Portwest

Nitrile gauntlet with sandy palm dip for a secure grip and abrasion resistance. This glove is designed for use in wet and oil environments. Using a lightweight soft comfortable liner, it increases the wearability for prolonged periods of time.