13931 Results for: "MEMMERT"

Supplier: MEMMERT

The UF TS pass through ovens help to minimise contamination when transporting samples or components. They have an easy-to-clean interior, fast recovery times after opening the door as well as homogeneous temperature distribution, this oven is the perfect material lock between the grey room and the cleanroom in the electronics, semiconductor, medicine or pharmaceutical industries.

Supplier: MEMMERT

Light module warm white 2,700 K: light strips arranged on the side walls of the interior, 10 strips for model 110, 14 for model 260/410/750, programme-controlled dimming from 0 to 100 % (in 1 % steps), ramp programming in combination with temperature (only with TwinDISPLAY; not in combination with F6, F7, D8), For: IPP260ecoplus

Supplier: MEMMERT

Additional blank, formatted chip card (32 kB MEMoryCard XL), For: Maximum of 40 ramps, suitable for use with all Memmert units

Supplier: MEMMERT

Storage Cooled Incubators, IPS Series

Supplier: MEMMERT

The ICH range of climatic chambers offers rapid and precise temperature control from 10 up to 60 °C with humidification from 10 to 80% RH. These compressor cooled units have stainless steel inner chamber and housing, ensuring long working life and easy cleaning. The ICH models have humidity control, ICH L models feature humidity control and light and ICH C models have humidity and an electronic CO₂ control with automatic zero setting, NDIR measurement system and auto-diagnostic system.

Supplier: MEMMERT

The range has natural and forced convection models with a temperature range up to 80 °C. There is a choice of two different displays, SingleDISPLAY or TwinDISPLAY depending on the application.

Supplier: MEMMERT

One year extension to warranty period, For: UF75plus

Supplier: MEMMERT

May affect the temperature distribution in the chamber.

Supplier: MEMMERT

Shelves, Perforated stainless steel shelf, For: IN55plus

Supplier: MEMMERT

Accessory stainless steel grid shelves.

Supplier: MEMMERT

These ICHeco climate chamber are climate-friendly and powerful chamber for the stability testing in accordance with ICH and GMP in the areas of pharmaceuticals, cosmetics or food works.

Supplier: MEMMERT

IFbw blanket warmer are suitable for warming non-sterile blankets and cloths, these are preheated to a precise temperature so they are readily available to help keep patients warm. This minimises the risk of complications such as wound infections, cardiovascular disorders, cardiac arrhythmia or vascular disorders. Thanks to the stainless steel chamber and outside surfaces, the units are easy to clean. Built-in safety features.

Supplier: MEMMERT

The range of cooled incubators have a temperature range from below zero up to 60 °C, units ensure rapid and precise heating up and cooling down times without energy intensive power bursts. All models have stainless steel inner chamber and housing, ensuring long working life and easy cleaning. These compressor cooled incubators have an integrated data logger and digital timer which is adjustable from one minute to 99 days and 23 hours.

Supplier: MEMMERT

The range has natural and forced convection models with a temperature range up to 80 °C. There is a choice of two different displays, SingleDISPLAY or TwinDISPLAY depending on the application.

Supplier: MEMMERT

These sterilisers comply with all relevant standards and regulations for medical products, and guarantee reliable program sequences, irrespective of the load and chamber volume. With the SetpointWAIT function validation of this hot air steriliser is possible anytime. The SetpointWAIT function ensures that the program only continues when the set point temperature has been reached. Precisely maintaining the sterilisation time and thus completely killing off even highly resistant microorganisms is, therefore, guaranteed at all times, irrespective of the sterilisation load and chamber volume. This feature can also be used with additional, freely positionable PT100 temperature sensors. In this case, sterilisation only begins when the set point temperature has been reached at all measurement points – that is, in the load. For special applications such as depyrogenisation, this hot air steriliser is absolutely ideal. SFplus models are equipped with TwinDISPLAY.

Supplier: MEMMERT

The range includes forced convection models with a temperature range up to 300 °C. There is a choice of two different displays, SingleDISPLAY or TwinDISPLAY depending on the application.

Supplier: MEMMERT

The ICO series of CO₂ incubators has seamlessly welded, corrosion-resistant stainless steel chambers with rounded edges and no further installations, ensuring easy and thorough cleaning. Models have TwinDISPLAY with a USB port for uploading programs, reading out logs or protecting appliances via the user ID function, and an Ethernet interface as well as a data logger with a 10 year storage capacity. All parameters can be set directly in the ControlCOCKPIT or the AtmoCONTROL software, which uses drag and drop symbols to input values. Battery-buffered ControlCOCKPIT (optional): Operating display, logging and CO₂ control are fully functional even during a power failure.

Supplier: MEMMERT

Sets eco standards for cultivation below room temperature: Unmatched energy efficiency, excellent heat-up, cool-down and recovery times.

Supplier: MEMMERT

The Memmert environmental test chambers offer rapid and precise temperature changes from -42 to +190 °C and electronic humidity control from 10 to 98% RH. These advanced test chambers feature robust stainless steel inner chamber and housing, ensuring durability and easy cleaning. The CTC/TTC model is ideal for controlled material testing, functional tests, aging tests, or climate tests of composite materials, concrete, plastics, or electronic components in fields such as materials technology, automotive, aerospace and electronics.

Supplier: MEMMERT

Humidity chambers which have corrosion resistant, stainless steel inner chamber and housing for long-term climatic tests at constant temperature and humidity. Ideal for food processing, cosmetics, pharmaceutical, biotechnology and electronics industries. Units feature an auto diagnostic system with fault indication for temperature and humidity control. The working chamber is heated on all six sides; this together with electronic humidity control prevents condensation forming in the chamber. Distilled water is supplied from an external 2,5 litre tank by means of a self priming pump. lnternal log memory 1024 kB (ring buffer) for all relevant data, capacity is approximately three months at one minute intervals. GLP/GMP compliance is assisted by the USB interface and 'Celsius' software for programming and documentation.

Supplier: MEMMERT

The range includes natural convection models with a temperature range up to +300 °C. There is a choice of two different displays, SingleDISPLAY or TwinDISPLAY depending on the application.

Supplier: MEMMERT

Frame, Subframe, on castors (size 110 to 160: height 560 mm), for IF 110

Supplier: MEMMERT

Wall Hooks, Wall mount, For IF30

Supplier: MEMMERT

This steriliser complies with all relevant standards and regulations for medical products and guarantees reliable programme sequences, irrespective of the load and chamber volume. Especially due to the SetpointWAIT function the validation of this hot air steriliser is possible anytime. The SetpointWAIT function ensures that the programme is only continued when the setpoint temperature has been reached. Precisely maintaining the sterilisation time and completely killing off even highly resistant microorganisms is therefore guaranteed at all times, irrespective of the sterilisation load and chamber volume. This feature can also be used with additional, freely positionable PT100 temperature sensors. In this case, sterilisation only begins when the setpoint temperature has been reached at all measurement points – that is, in the load. For the special application of depyrogenisation, the hot-air steriliser is ideal.

Supplier: MEMMERT

UNpa paraffin ovens provide precise and homogenous temperature control of paraffin embedding medium without any loss in quality. UNpa paraffin ovens are designed specifically for reliable sample preparation in the laboratory and have an intuitive and easy to use operating menu plus a high-quality, corrosion-resistant and easily cleanable stainless steel working chamber and housing.

Supplier: MEMMERT

Compressed air dehumidification (efficient dehumidification of the interior by means of compressed air) with standard works calibration certificate at +10 °C with 10% rh, ICH750L

Supplier: MEMMERT

Reliable, powerful, energy efficient vacuum ovens with separately adjustable thermo shelves which are directly heated ensuring precise temperature control and, thanks to digital pressure control, the chamber load is not only dried at high speed, but also extremely gently in these robust units. Ideal for drying foodstuffs, cosmetics, granulates, watches, books, printed circuit boards, electronic components or injection moulds. All models have a safety glass door with bullet proof inner glass and an anti-splinter external screen. The exterior housing is made of textured stainless steel while the inner chamber is made of hermetically welded, high quality stainless steel (DIN 1.4404).

Supplier: MEMMERT

The ICOmed series of CO₂ incubators has seamlessly welded, corrosion-resistant stainless steel chambers with rounded edges and no further installations, ensuring easy and thorough cleaning. Models have TwinDISPLAY with a USB port for uploading programs, reading out logs or protecting appliances via the user ID function, and an Ethernet interface as well as a data logger with a ten year storage capacity. All parameters can be set directly in the ControlCOCKPIT or the AtmoCONTROL software, which uses drag and drop symbols to input values. Battery-buffered ControlCOCKPIT (optional): Operating display, logging and CO₂ control are fully functional even during a power failure.

Supplier: MEMMERT

Ideal for temperature control of ointments, emulsions, samples, plates and nutrient solutions in the laboratory, as well as warm storage and calibration in the industrial segment.

Supplier: MEMMERT

The range has a choice of Peltier cooled models with a temperature range up from zero up to 70 °C. There is a choice of two different displays, SingleDISPLAY or TwinDISPLAY depending on the application. Peltier technology provides energy efficient cooling and heating. The Peltier elements can be controlled individually ensuring homogenous temperature and humidity distribution in the chamber. All models have stainless steel inner chamber and housing, ensuring long working life and easy cleaning. These cooled incubators have an integrated data logger and digital timer which is adjustable from one minute to 99 days and 23 hours.