247 Results for: "Filtration systems"

Supplier: Sartorius

Polyethersulfone membrane
The robust polyethersulfone membrane (PESU) is a polymer, stable within a broad pH (1 to 14) and temperature range. Membrane regeneration and depyrogenation is accomplished by using (1 N) NaOH at elevated temperatures. Cassettes are stored in 0,1 N NaOH.

Supplier: Sartorius

The Minisart® Acticosart syringe filter with chemically inert hydrophobic PTFE is suitable for venting as well as filtration of gases with a pH of 3 to 12.

Supplier: Sartorius

Sartocon® Slice cassettes are made of the same materials and construction and, therefore, the identical flow path length as the Sartocon cassettes, used for larger-scale production. The scale-up and the scale-down is perfectly linear throughout the range of applications, from cell harvesting to protein purification and concentration.

Supplier: Avantor Fluid Handling

Single-use solution to monitor process pressure.

Supplier: asecos

Recirculating air filter system UFA.20.30
Avoid complex wall, ceiling and roof penetrations and costly extract systems. Safe capturing of escaping vapours at the point where they are released or produced.
High flexibility in choosing the installation location
Active personal protection through safe capture of harmful vapours with retention in the filter system
Very low noise, ~39 dB(A)
ATEX complient: CE II 3/-G Ex ic nA IIB T4 Gc
Housing made of sheet-steel plastic laminated
With multistage filter system and power cord
Incl. VDE tested extraction and filter monitoring
Optical and acoustical alarm including potential-free alarm contact
Dimensions W×D×H: 305×555×210 mm
The plug-in recirculating air filter system UFA.20.30 is capable of retaining solvent vapours (hydrocarbons) permanently up to a filter saturation of more than 99,999%, under normal operating conditions as well as for a simulated accident in the safety storage cabinet.
A special version of the recirculating air filter system UFA.20.30-AUS is also available to meet the pressure conditions and volumetric flows of safety storage cabinets with a small internal volume. It can be installed on a wall bracket or in a convenient housing unit.

Supplier: VACUUBRAND

Vacuum filtration is one of the most common applications used for sample preparation in chemistry, microbiology, wastewater control and other analytical processes. VP 100 and VP 100 C diaphragm pumps offer a compact, high performance and easy to use solution which is perfect for both single and multiple filtrations.

Supplier: Sartorius

Hydrosart® membranes are stabilised cellulose based membranes that have been optimised for the biotechnological and pharmaceutical industry. It is a stable polymer that features a broad pH range. Hydrosart® is also extremely hydrophilic, making it non-protein binding, virtually non-foul and has extremely high flux. Membrane regeneration, storage and depyrogenation can be accomplished by using NaOH even at elevated temperatures. These features make Hydrosart® an ideal membrane for biological applications.

Supplier: VELP SCIENTIFIC

Convenient, reliable and safe acid and basic hydrolysis unit, for sample preparation prior to extraction for total fat determination.

Supplier: VACUUBRAND

Chemistry diaphragm pumps from VACUUBRAND for aggressive gases and vapors are available in the basic version, with two-point or VARIO® control. Their construction with fluoropolymers makes them very resistant to chemical vapors from inlet to exhaust.

Supplier: Brand

The Liquid Handling Station provides maximum flexibility for small and medium sample throughput and varied pipetting tasks. It closes the gap between electronic pipettes and large, expensive equipment.

Supplier: VACUUBRAND

Chemistry diaphragm pumps from VACUUBRAND for aggressive gases and vapors are available in the basic version, with two-point or VARIO® control. Their construction with fluoropolymers makes them very resistant to chemical vapors from inlet to exhaust.

Supplier: VACUUBRAND

Chemistry diaphragm pumps from VACUUBRAND for aggressive gases and vapors are available in the basic version, with two-point or VARIO® control. Their construction with fluoropolymers makes them very resistant to chemical vapors from inlet to exhaust.

Supplier: VACUUBRAND

Chemistry diaphragm pumps from VACUUBRAND for aggressive gases and vapors are available in the basic version, with two-point or VARIO® control. Their construction with fluoropolymers makes them very resistant to chemical vapors from inlet to exhaust.

Supplier: VACUUBRAND

Chemistry diaphragm pumps from VACUUBRAND for aggressive gases and vapors are available in the basic version, with two-point or VARIO® control. Their construction with fluoropolymers makes them very resistant to chemical vapors from inlet to exhaust.

Supplier: VACUUBRAND

Chemistry diaphragm pumps from VACUUBRAND for aggressive gases and vapors are available in the basic version, with two-point or VARIO® control. Their construction with fluoropolymers makes them very resistant to chemical vapors from inlet to exhaust.

Supplier: VACUUBRAND

Diaphragm pumps from VACUUBRAND for non-corrosive media are available in the basic version and variants with VARIO® control. Important benefits include oil-free and whisper quiet operation, low maintenance requirements, and extended service life.

Supplier: VACUUBRAND

Diaphragm pumps from VACUUBRAND for non-corrosive media are available in the basic version and variants with VARIO® control. Important benefits include oil-free and whisper quiet operation, low maintenance requirements, and extended service life.

Supplier: VACUUBRAND

Chemistry diaphragm pumps from VACUUBRAND for aggressive gases and vapors are available in the basic version, with two-point or VARIO® control. Their construction with fluoropolymers makes them very resistant to chemical vapors from inlet to exhaust.

Supplier: CODAN

The CODAN Spikes are a compact and safe needle-free system for the manual preparation, withdrawal or transfer of cytostatics and pharmaceuticals as well as their solvent solutions. In order to protect users from aerosols and the drug from micro bacterial contamination, all CODAN Spikes are equipped with a hydrophobic 0,2 µm air filter.

Supplier: Sartorius

Hydrophobic cellulose nitrate and cellulose acetate gridded membrane filters for colony count and sterility testing, with outstanding retention rates for microorganisms.

Supplier: VELP SCIENTIFIC

Raw fibre determination is useful for nutritional, economic and legislative aspects in the food industry, where fibre content is often requirement for labelling of packaged foods. The FIWE units provide a semi automatic process to meet requirements of ADF, NDF, Weende and Van Soest methodologies.

Supplier: LABCONCO

These glove boxes with stainless steel liner provide inlet and outlet ULPA filtration and a leak-tight physical barrier to protect the operator from exposure to potentially hazardous materials and perform work with contamination-sensitive materials under vacuum or in an inert environment. Available with two or four glove ports (double version).

Supplier: VACUUBRAND

The PC 3001 VARIO select pumping unit precisely controls the vacuum level in order to achieve unparalleled process control. The integrated VACUU·SELECT controller provides an easy-to-use, application based interface that covers all common lab applications.

Supplier: Molecular Devices

Transform your whole colony picking process by eliminating the risk of double picks or blank wells, reducing manual picking errors and avoiding cross-contamination. With a QPix® system, you can rely on advanced imaging and analysis combined with high precision robotics to pick the right colony every time. Highly robust performance ensures data quality and high viability of picked colonies.

Supplier: Cytiva

Sephadex™ G-100 DNA Grade is ideal for use in preparing spin columns for DNA purification.

Supplier: OMEGA BIO-TEK

Mag-Bind® RXNPure Plus Kit allows rapid and reliable isolation DNA from PCR and enzymatic reactions with high recovery rates. The system combines proprietary chemistries with the reversible nucleic acid-binding properties of magnetic beads that selectively bind PCR amplicons 100 bp and larger, and eliminate excess nucleotides, primers and small, non targeted amplification products, such as primer dimers.

Supplier: Cytiva

NICK™ columns were originally designed for purification of nick-translated DNA fragments but are also suitable for separation of any labelled probe from unincorporated labelled nucleotides.

Supplier: Avantor Fluid Handling

Avantor's PUPSIT (Pre-Use Post-Sterilization Integrity Testing) assemblies are designed to simplify pre-use integrity testing while maintaining product sterility.

Supplier: Cytiva

Sephadex G-50 grade F is a size exclusion chromatography resin designed for desalting and buffer exchange, and for purification of DNA and oligonucleotides greater than 20 bases in length using spin columns.

Supplier: TIGER-VAC

New generation cleanroom vacuum cleaners available in dry only or in wet and dry configurations. Designed specifically for the pharmaceutical, semiconductor and microelectronics industry.