352 Results for: "EUPROMOCLEARANCECHEM00001"

Supplier: Merck

Sulphuric acid 0.05 mol/l (0.1 N) in aqueous solution, Titripur® volumetric solution, Supelco®

Supplier: Merck

Hydrochloric acid 0.5 mol/l (0.5 N), Titripur® Reag. USP volumetric solution, Supelco®

Supplier: Merck

Desiccant suitable for desiccators to remove water, and for drying most gases and liquids (apart from strongly acidic and basic gases, organic solvents or alkaline liquids). The product contains iron salts as the indicator. Colour change is from orange to colourless at approx. 7/10 g adsorbed H₂O/100 g silica gel. Regeneration can be performed as often as required at 130 to 140 °C in a drying oven for approx. 3 hours.

Supplier: Merck

A range of cleansers, for machine washing and rinsing, that have been developed to meet the cleaning requirements for glassware and small equipment in the laboratory.

Supplier: Thermo Orion

Orion™ AQUAfast™ COD reagents in digestion tubes are designed for use with Orion™ AQUAfast™ colorimeters and Orion™ AquaMate Vis and UV-Vis spectrophotometers. Just add the sample to the COD digestion tube, digest sample in thermoreactor and measure.

Supplier: VWR Chemicals

A range of culture media in compliance with ISO standards and the International Harmonised Pharmacopoeia. All our media are, as you would expect, produced using high quality raw materials and are subject to strict quality controls, in a production environment following Good Manufacturing Practice guidelines. Raw materials are selected in compliance with the required standards. Dehydrated culture media should be stored at 10 to 30 °C unless otherwise stated, in their closed containers in a dry environment. Standard pack size is 500 g.

Supplier: Merck

With their high degree of UV transmittance, low particle count, low acidity and alkalinity and low evaporation residue level, LiChrosolv® solvents are ideal for reproducible separations. Since separations are normally carried out under gradient conditions in analytical HPLC, we offer solvents in "gradient grade" as well as "isocratic grade". This enables to minimize the gradient effect of the solvent involved.

Supplier: Merck

HPTLC plates, unmodified silica gel 60
This range of plates uses an optimised Merck silica gel 60 with a particle size of only 5 to 6 µm, which results in higher packing density and a smoother surface, therefore, reducing band diffusion. Less sample is required, 0,1 to 0,5 µl than for classic TLC.

Supplier: Merck

RP-2, RP-8 and RP-18 are based on silica gel 60 modified with aliphatic hydrocarbons. The chain length, in combination with the degree of modification, defines the ability to tolerate water in the solvent system and strongly affects retention. Migration time increases in the order RP-2, RP-8 and RP-18 using the same solvent composition. RP-8 and RP-18 can be run with up to 60% water in the solvent system.

Supplier: Merck

With their high degree of UV transmittance, low particle count, low acidity and alkalinity and low evaporation residue level, LiChrosolv® solvents are ideal for reproducible separations. Since separations are normally carried out under gradient conditions in analytical HPLC, we offer solvents in 'gradient grade' as well as 'isocratic grade'. This minimises the gradient effect of the solvent involved.

Supplier: Merck

MQuant® (MQ) test strips can be considered as a mobile laboratory on a few square millimeters of plastic strip. As a screening method they provide the user with a rapid overview of the situation, which helps in making the choice of what, and perhaps if, further analysis is required, thereby leading to potentially substantial savings in time and analytical resources. The strip is a biologically-degradable polyester foil and the low reagent content, in the reaction zones, assists problem-free waste disposal.

Supplier: Merck

MQuant® (MQ) test strips can be considered as a mobile laboratory on a few square millimetres of plastic strip. As a screening method they provide the user with a rapid overview of the situation, which helps in making the choice of what, and perhaps if, further analysis is required, thereby leading to potentially substantial savings in time and analytical resources. The strip is a biologically degradable polyester foil and the low reagent content, in the reaction zones, assists problem-free waste disposal.

Supplier: Merck

MQuant® (MQ) test strips can be considered as a mobile laboratory on a few square millimeters of plastic strip. As a screening method they provide the user with a rapid overview of the situation, which helps in making the choice of what, and perhaps if, further analysis is required, thereby leading to potentially substantial savings in time and analytical resources. The strip is a biologically-degradable polyester foil and the low reagent content, in the reaction zones, assists problem-free waste disposal.

Supplier: Merck

MQuant® (MQ) test strips can be considered as a mobile laboratory on a few square millimeters of plastic strip. As a screening method they provide the user with a rapid overview of the situation, which helps in making the choice of what, and perhaps if, further analysis is required, thereby leading to potentially substantial savings in time and analytical resources. The strip is a biologically-degradable polyester foil and the low reagent content, in the reaction zones, assists problem-free waste disposal.

Supplier: Merck

Sodium hydroxide 0,1 mol/l (0,1 N) in aqueous solution, Titripur® Reag. Ph. Eur. volumetric solution, Supelco®

Supplier: Merck

EMSURE® grade solvents are suitable for a broad spectrum of classical lab applications, and are frequently used in regulated and highly demanding lab applications. EMSURE® provides worldwide best and most extensive product specifications. We declare our EMSURE® range to be in compliance with the ACS, with the reagent part of the European Pharmacopoeia (Reag. Ph Eur) and also with the ISO standards.

Supplier: Merck

Hydrochloric acid 0,1 mol/l (0,1 N), Titripur® Reag. USP, Reag. Ph. Eur. volumetric solution, Supelco®

Supplier: Merck

Sodium hydroxide 1 mol/l (1 N) in aqueous solution, Titripur® Reag. USP, Reag. Ph. Eur. volumetric solution, Supelco®

Supplier: Merck

EMSURE® grade solvents are suitable for a broad spectrum of classical lab applications, and are frequently used in regulated and highly demanding lab applications. EMSURE® provides worldwide best and most extensive product specifications. We declare our EMSURE® range to be in compliance with the ACS, with the reagent part of the European Pharmacopoeia (Reag. Ph Eur) and also with the ISO standards.

Supplier: Merck

Cerium(IV) sulphate 0.1 mol/l (0.1 N) in aqueous solution, Titripur® Reag. Ph. Eur. volumetric solution, Supelco®

Supplier: Merck

—Formaldehyde (HCOH) is one of the most familiar and effective fixatives. The fixation of the histological specimen material of human or animal origin is commonly performed in a 4% or 10% Formaldehyde solution. Chemically, the 4 % Formaldehyde solution equals a 10 % Formalin solution. The Formaldehyde solution min. 37% is a stock solution that is used for histology and can be diluted with e.g. PBS to 4% ready-to-use fixation solution.

Supplier: Merck

EMSURE® grade solvents are suitable for a broad spectrum of classical lab applications, and are frequently used in regulated and highly demanding lab applications. EMSURE® provides worldwide best and most extensive product specifications. We declare our EMSURE® range to be in compliance with the ACS, with the reagent part of the European Pharmacopoeia (Reag. Ph Eur) and also with the ISO standards.

Supplier: Merck

EMSURE® grade solvents are suitable for a broad spectrum of classical lab applications, and are frequently used in regulated and highly demanding lab applications. EMSURE® provides worldwide best and most extensive product specifications. We declare our EMSURE® range to be in compliance with the ACS, with the reagent part of the European Pharmacopoeia (Reag. Ph Eur) and also with the ISO standards.

Supplier: Merck

For calibration of pH meters.

Supplier: Merck

Tris(hydroxymethyl)aminomethane (TRIS, Trometamol) ACS, Reag. Ph. Eur. analytical reagent, buffer substance, Millipore®

Supplier: USP

USP Reference Standards are specified for use in conducting official USP–NF tests and assays. USP also provides Reference Standards specified in the Food Chemicals Codex as well as authentic substances—high-quality chemical samples—as a service to analytical, clinical, pharmaceutical and research laboratories. To confirm accuracy and reproducibility, USP Reference Standards are rigorously tested and evaluated by multiple independent laboratories including USP, commercial, regulatory, and academic labs. USP also provide publicly available, official documentary standards for pharmaceutical ingredients in the USP–NF that link directly with our primary reference standards.

Supplier: Merck

With their high degree of UV transmittance, low particle count, low acidity and alkalinity and low evaporation residue level, LiChrosolv® solvents are ideal for reproducible separations. Since separations are normally carried out under gradient conditions in analytical HPLC, we offer solvents in "gradient grade" as well as "isocratic grade". This enables to minimize the gradient effect of the solvent involved.

Supplier: Merck

EMSURE® grade solvents are suitable for a broad spectrum of classical lab applications, and are frequently used in regulated and highly demanding lab applications. EMSURE® provides worldwide best and most extensive product specifications. We declare our EMSURE® range to be in compliance with the ACS, with the reagent part of the European Pharmacopoeia (Reag. Ph Eur) and also with the ISO standards.

Supplier: Merck

Sodium hydroxide 0.5 mol/l (0.5 N) in aqueous solution 0.5 mol/l (0.5 N) in aqueous solution, Titripur® volumetric solution, Supelco®

Supplier: Merck

SupraSolv® ECD and FID is specially developed for gas chromatography in combination with ECD (Electron Capture Detetor) and FID (Flame Ionization detector). SupraSolv® solvents offer the largest specified retention time range, a clear baseline and a minimal signal-to-noise ratio leading to reliable and reproducible analysis results.