You searched for: Environmental Test Kits

Supplier: Hach

These are used for determination of Ultra Low Range silica by the Heteropoly Blue Rapid Liquid method. Rapid Liquid™ methods offer an economical way to analyse multiple samples and to measure trace concentrations.

Supplier: MACHEREY-NAGEL

The test paper allows the easy determination of hydro sulphite (Sodium dithionite). It is used to determine the endpoint in the conversion of vat dyes to the leuco form. Because of the special purpose, indanthrene yellow paper is also called hydrosulphite paper.

Supplier: MACHEREY-NAGEL

Photometric test kits for the determination of zinc in water samples.

Supplier: MACHEREY-NAGEL

The test paper allows the quick and easy detection of Antimony [Sb(III)]. In the presence of Antimony [Sb(III)] it shows orange-red spots on a yellow background. Pentavalent Antimony Sb(V), has to be reduced to Sb(III) with metallic Magnesium.

Supplier: Hach

Ethylene glycol (anti-freeze) contamination of automotive lubricants is an indication of a cracked engine block. Glycol presence also can indicate leaks in cooling systems. This test kit model EG-1 presents a purple colour if ethylene glycol and other 1,2 glycols are present in oil or water.

Supplier: MACHEREY-NAGEL

Suitable for automatic water analysis on the Skalar robot SP2000 series. Precise rapid tests for all types of water and wastewater samples.

Supplier: Lovibond

CHECKIT® Comparator is a compact and handy colorimetric unit which is suitable for both mobile and static analysis work. Supplied with a generous number of different colour scales, it provides the basis for a comprehensive, easy-to use colorimetric analysis system.

Supplier: Hach

Used for determination of Total Organic Carbon (TOC) either by low range, mid range or high range test 'N Tube' method respectively. The set includes digestion vials and reagents for 25 to 50 tests.

Supplier: MACHEREY-NAGEL

A pre-dosed NANOCOLOR® tube test for photometric determination of TOC (total organic carbon) in water.

Supplier: MACHEREY-NAGEL

Photometric test kit for the determination of Kjeldahl nitrogen in water samples.

Supplier: Hach

It is a simple, economical colour disc kit to determine the presence of detergents in surface or ground waters which indicates industrial or domestic pollution. In natural waters anionic LAS and ABS detergents cause excessive foaming, promote growth of disease producing organisms and tend to kill aquatic life. This kit achieves fast results with an portable test kit.

Supplier: Lovibond

Easily monitor nitrite levels in closed-loop cooling systems with this liquid reagent. Proper control of nitrite levels prevents pipework corrosion. This easy-to-use colourimetric method test can monitor high levels (up to 2,500 mg/L) of nitrite without the need to dilute samples.

Supplier: MACHEREY-NAGEL

Semi-quantitative test strips for reliable determination of total chlorine concentrations as low as 0,01 mg/L (ppm). A hole in the plastic carrier allows the water to migrate through the test pad, providing a high level of sensitivity. Ideal for rapid and easy analysis of total chlorine directly on-site. No maintenance or calibration is required.

Supplier: MACHEREY-NAGEL

QUANTOFIX® test strips meet all requirements of a modern rapid test. The colour of the reactive pad changes depending on the concentration of an analyte in the sample. The evaluation is usually carried out visually by comparison of the reaction colour with a multi-stage colour scale. The test strips are intended for single use, maintenance or calibration are not required.

Supplier: MACHEREY-NAGEL

QUANTOFIX® test strips meet all requirements of a modern rapid test. The colour of the reactive pad changes depending on the concentration of an analyte in the sample. The evaluation is usually carried out visually by comparison of the reaction colour with a multi-stage colour scale. The test strips are intended for single use, maintenance or calibration are not required.

Supplier: Hach

This kit is used for controlling boiler and cooling water treatment and checking corrosion using the drop count test which is a simple volumetric/ titration method with colour indication. It is an economical solution for the small boiler operator who needs to monitor alkalinity (5 to 400 mg/L), chloride (5 to 400 mg/L), hardness (0 to 2500 mg/L), iron (0 to 4 mg/L), and pH (4 to 10).

Supplier: Hach

Test kit, Nitrite (NitriVer® 3), Range: 0 - 0,5 mg/l

Supplier: Hach

Test kit, Aluminum (AluVer® 3), Range: 0 - 0,80 mg/L

Supplier: Hach

Test kit, Chromium reagent 1, Range: 0,01 - 0,60 mg/l

Supplier: Hach

Test kit, Ammonia-Nitrogen, Range: 0,01 - 0,50 mg/l

Supplier: Hach

Test kit, Monochlor F reagent powder pillows, Range: -

Supplier: Hach

Simple, economical visual test kit method for copper.

Supplier: Hach

Qualitative results using traditional colour comparator disc methods.

Supplier: Lovibond

Test kit, Phenol No 1 tablet, Range: 0,1 - 5 mg/L C₆H₅OH, For unit: SpectroDirect

Supplier: Lovibond

Test kit, Chloride test reagent, Range: 5 – 60 mg/l, For unit: MD 100

Supplier: Hach

Qualitative results using traditional colour comparator disc methods.

Supplier: Hach

This buffer is used for hardness and chelant determination by titration.

Supplier: Lovibond

Comparator 2000+ is a versatile modular system for testing water.

Supplier: Hach

These reagents used for low and ultra-low range silica determination by the Heteropoly Blue method.

Supplier: MACHEREY-NAGEL

This test paper allows the quick and easy detection of Copper(I) and Copper(II) ions.