You searched for: Fittings and Connectors

Supplier: VICI JOUR RESEARCH

These VICI Jour® nuts incorporate a unique PEEK double ferrule which grips the tubing in two places for added security, especially with PEEK or Tefzel tubing. For virtually any ¹/₁₆'' OD fittings eg. Parker, Swagelok, Waters, Valco, Rheodyne, Upchurch.

Supplier: UPCHURCH SCIENTIFIC

PEEK. Ideal for infusing samples into lab-on-a-chip devices. This product introduces only 14 nl of additional volume to the flow path. Use it to directly connect a Luer-tip syringe or other product that terminates with a standard male Luer to 360 µm ext. Ø capillary tubing without tubing sleeves. MicroTight® fittings are included.

Supplier: UPCHURCH SCIENTIFIC

VacuTight™ fittings provides airtight, dependable connections under vacuum and low pressure conditions. These nuts have streamlined profiles for use in systems requiring a large number of connections in a small area, the ferrules are small size ensures sufficient nut/thread engagement, even in shallow ports. Ideal for combichem, high throughput screening, clinical diagnostic and other automated liquid handling applications.

Supplier: LENZ LABORGLAS GMBH & CO.KG

Connectors, made of PBT, red with integrated silicone (VMQ)-PTFE sealing.

Supplier: VICI JOUR RESEARCH

Ferrule, SS bushing, PEEK, For tubing ext.Ø: 1/32"

Supplier: UPCHURCH SCIENTIFIC

These fittings are made from stainless steel.

Supplier: UPCHURCH SCIENTIFIC

PEEK or PCTFE.

Supplier: UPCHURCH SCIENTIFIC

These low pressure unions are made from PEEK, ETFE, Delrin or PP.

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific® NanoTight™, F-142N, ferrules, ETFE natural, 10-32 coned port, for 1/16" OD tubing, 4000 psi, ETFE

Supplier: UPCHURCH SCIENTIFIC

These female M6 adapters are made from PEEK, EFTE or PCTFE.

Supplier: UPCHURCH SCIENTIFIC

LuerTight™ fittings are designed for connecting fluoropolymer tubing without barbs or nuts. By integrating ferrules into the Luer bodies, these fitting reliably hold tubing in place while giving the convenience of a Luer connection.

Supplier: SEMADENI

Hose connector, PE-HD, D = 9 mm

Supplier: SEMADENI

Connectors, Y- shaped, made of PP, natural color.

Supplier: UPCHURCH SCIENTIFIC

Ultra high performance fittings are manufactured from a proprietary PEEK blend (PK) which allow them to be used at higher temperatures (up to 200 °C) and higher pressures.

Supplier: SEMADENI

PP, gray.

Supplier: VICI JOUR RESEARCH

One-piece hex-head fittings made from PEEK are easy to use with the ValvTool and the Color-It Color-Coded Fingertight adapters. The 10-32 thread is suitable for standard high-pressure female connections. They are available both in a short and long version.

Supplier: UPCHURCH SCIENTIFIC

These PEEK adapters make connections to female ¹/₈" and ¹/₄" National Pipe Thread (NPT) ports.

Supplier: UPCHURCH SCIENTIFIC

PP, ETFE or PEEK. The barbed inserts of the swivel barb adapters spin freely from the threaded nut in order to prevent the tubing from twisting during installation.

Supplier: UPCHURCH SCIENTIFIC

Designed for plumbing tubing through equipment housing. Each union has unique ³/₈-24 external threads and comes complete with a stainless steel nut and lock washer to hold it in place.

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific®, P-116, plug for micro fittings, PEEK, Black

Supplier: UPCHURCH SCIENTIFIC

Reusable fittings made from stainless steel and proprietary PEEK polymer blend. Reusable up to 10 cycles without tubing damage or impact on pressure holding ability or carry-over (5 cycles if tightened to 1,6 N.m). Pressure rating up to 30 000 psi (2070 bar). Required torque 10 in-lbs (1,10 N-m)/14 in-lbs (1,6 N-m).

Supplier: VICI JOUR RESEARCH

PEEK flangeless nuts in combination with the inverted ferrule do not require flanging tools. A hand tightening procedure makes leak free seals. The inert ETFE ferrule is the only part, besides the tubing, which is in contact with the fluid, the nut is never in contact with the fluid stream.

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific® quick connect Luer adapters provide the opportunity to adapt either a female Luer or male Luer connection to a threaded connection. Conform to ISO requirements for medical Luer taper configuration and performance (45 psi/3,1 bar).

Supplier: KLS Martin Group

Couplings, tubing, Faucet coupling for water jet pump 1/2", Thread: 12,7 mm

Supplier: VICI JOUR RESEARCH

These fittings are designed for 360 µm tubing (metal, fused silica, PEEK or fused silica).

Supplier: VICI JOUR RESEARCH

These PP adapters are used for colour coding different solvent lines. They turn ¹/₄" hex-head nuts into fingertight fittings.

Supplier: UPCHURCH SCIENTIFIC

These fittings eliminate loosening due to tubing twist.

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific® MicroTight®, F-126S, fitting, standard micro knurl, PEEK red, 6-32 coned port, for 1/32" OD tubing, 5000 psi, PEEK

Supplier: VICI JOUR RESEARCH

These stainless steel 316 tees and crosses are ideal for joining solvent lines.

Supplier: VICI JOUR RESEARCH

Polyacetal flangeless nuts in combination with the inverted ferrule do not require flanging tools. A hand tightening procedure makes leak free seals. The inert ETFE ferrule is the only part, besides the tubing, which is in contact with the fluid, the nut is never in contact with the fluid stream.