You searched for: Fittings and Connectors

Supplier: Restek

This MSD source nut is made from brass. The 1,2 mm nut bore permits easy removal of ferrules with a standard tapered needle file. The material prevent thread-stripping on the transfer line, the design enhances ease of threading onto the transfer line and improves overall lifetime.

Supplier: ROMETSCH

Connectors, Luer lock, female, Metal, Tubing int.Ø: 4,5 mm

Supplier: SEMADENI

Connectors, made of white PP, with tapered ends, for connecting tubing with the same diameter.

Supplier: VICI JOUR RESEARCH

Ferrule, CTFE, collapsible, for 1/8" O.Ø tubing

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific®, P-312, lock nut for flangeless nuts, delrin white, 1/4-28 flat bottom port, Delrin®*

Supplier: UPCHURCH SCIENTIFIC

PEEK.

Supplier: VICI JOUR RESEARCH

These nylon column end plugs fit all columns with 10-32 threads. The long design and threading down to the ferrule ensure safe closing of valuable columns.

Supplier: UPCHURCH SCIENTIFIC

Unions with stainless steel bodies and PEEK fittings.

Supplier: VICI JOUR RESEARCH

PEEK one-piece fingertight fittings. Work with all ¹/₁₆'' OD tubings and female 10 to 32 ports. They are rated to 350 bar and can be used with virtually any HPLC fittings, eg. Swagelok, Parker, Rheodyne, Valco.

Supplier: UPCHURCH SCIENTIFIC

MarvelX biocompatible PEEK-lined stainless steel UHPLC connection system is easy to use and eliminates dead volume. It also provides higher repeat uses without sacrificing from consistent performance.

Supplier: UPCHURCH SCIENTIFIC

VHP Microferrules are made from a proprietary high performance PEEK polymer blend, a material which is unique in its ability to enable the use of capillary tubing in UHPLC environments.

Supplier: VICI JOUR RESEARCH

Biocompatible PEEK construction. The unique feature of the VICI Jour® column coupler is that it adjusts to fit all 10-32 fitting types. No matter what the fitting type and pilot length – Valco®, Waters®, Upchurch®, Rheodyne®, etc., the coupler adapts to bottom out in the pilot automatically, consequently creating only small void volumes.

Supplier: UPCHURCH SCIENTIFIC

This micro injection port adapter assembly can be connected to 360 µm Ext.Ø capillary tubing to introduce samples. It accepts standard 22 gauge Hamilton-style injection syringe needles. The needle butts directly against the connecting tubing during injections, therefore no additional swept volume is added to the fluid pathway by this adapter.

Supplier: UPCHURCH SCIENTIFIC

Stainless steel and PEEK polymer.

Supplier: VICI JOUR RESEARCH

PEEK two-piece fingertight fittings. Fits any 10 to 32 fitting. Works with any ¹/₁₆'' OD tubing.

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific® Super Flangeless™, P-258B, ferrule, ETFE, blue, ETFE

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific®, P-245, flangeless fitting for 1/16" OD tubing, PFA natural/ETFE blue, 1/4-28 flat-bottom port, standard knurl

Supplier: NEOLAB

These are required to attach threaded vials to ground joint apparatus such as rotary evaporators.

Supplier: VICI JOUR RESEARCH

Plugs can be used to close off an unused port in a valve or manifold. Size ¹/₄ - 28".

Supplier: UPCHURCH SCIENTIFIC

PEEK or stainless steel.

Supplier: UPCHURCH SCIENTIFIC

PEEK polymer adapters connect peristaltic tubing to standard rigid or semi-rigid tubing.

Supplier: UPCHURCH SCIENTIFIC

These adapters are made from PEEK or PTFE. Female to male 10-32 to 1/4-28 adapters.

Supplier: UPCHURCH SCIENTIFIC

Metric flangeless fittings offer the same benefits as flangeless fittings with the additional feature of being used for metric tubing and ports. They are specifically designed to connect 1,8, 2,0, 2,5, 3,0, or 4,0 mm Ext.Ø tubing to flat-bottom ports when paired with the appropriate M6, 1/4-28, or 5/16-24 flangeless nuts.

Supplier: VICI JOUR RESEARCH

Unions for easy connection of low pressure solvent lines.

Supplier: UPCHURCH SCIENTIFIC

Note: Do not use metal fittings in plastic ports, as this can damage the port.

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific®, XU-655, flangeless fittings includes nut, PEEK black and washer, ETFE natural, 1/2-20 flat bottom port, 250 psi, for 1/4" OD tubing

Supplier: VICI JOUR RESEARCH

These fittings are designed for capillary LC, used in HTS techniques, proteomics, genomics, and other newer developments in industrial research requiring small sample size for reduction of analysis time, fittings and unions are easy to handle.

Supplier: UPCHURCH SCIENTIFIC

These adapters are made from PEEK or PCTFE.

Supplier: OMNIFIT

Omnifit® threaded adaptors are a useful range of problem solving parts that enable to convert thread sizes quickly and easily, accepting a ¹/₄"-28 UNF male fitting at one end and a range of male and female thread types at the other.

Supplier: UPCHURCH SCIENTIFIC

These adapters are made from PEEK or stainless steel. They create a true zero dead volume (ZDV) connection between ¹/₁₆" ext. Ø tubing and capillary tubing.