You searched for: Fittings and Connectors
These fittings for high-pressure connections are designed for tightening by hand or with compatible tools. The male and female fittings available will secure connections between instruments . Available in different sizes, shapes, and materials of fabrication, these fittings can be tailored to be suitable for any unique laboratory equipment setup. Fittings are suitable for use under extensive temperature ranges and are manufactured from stainless steel or plastic polymers for excellent strength.
Fittings, InfinityLab
Supplier: Agilent
InfinityLab Quick Connect fittings are 'finger-tight' reusable fittings for UHPLC, stable to 1300 bar.
Expand 14 Items
Luer lock valve adaptors
Supplier: Restek
These Luer lock valve adaptors are suitable for connecting a Luer lock fitting to a Rheodyne or Valco valve.
Expand 1 Items
One-piece fingertight fittings
Supplier: VARIAN
PEEK fittings resists pressure up to 5000 psi and temperature of 100 °C.
Expand 3 Items
Ferrules, GRAPHPACK®
Supplier: Restek
GRAPHPACK® technology provides a complete system that quickly and reliably makes a leak-tight, low-dead-volume connection.
Expand 2 Items
Bond Elut adapters
Supplier: VARIAN
Bond Elut adapters fit on top of any Bond Elut cartridge and contain a female Luer fitting that accommodates the tip of another cartridge.
Expand 1 Items
Capillary column caps
Supplier: Restek
These non-reusable column caps increase column lifetime, prevent moisture and air from entering the column during storage.
Expand 2 Items
Septum nuts
Supplier: Restek
These septum nuts are made of high-quality stainless steel and for use with Agilent 5890/6850/6890/7890 split or splitless injectors.
Expand 2 Items
Adaptors for PerkinElmer
Supplier: Agilent
Agilent adapters are equivalent to the PerkinElmer FIMS/FIAS versions, so you can be confident that they will integrate seamlessly with your PerkinElmer AA system.
Expand 11 Items
Column connectors and plugs
Supplier: Restek
Universal 10-32 PEEK connectors for easy installation of all ¹/₁₆" tubing, it includes stainless steel, up to 345 bar.
Expand 2 Items
Fittings, Siltek®/Sulfinert® and Silcosteel®-CR treated, Parker®
Supplier: Restek
Parker® (A-Lok) fittings are ideal for installing new equipment, modifying existing instrumentation, or replacing worn connections. Fittings are available in Siltek®/Sulfinert® or Silcosteel®-CR treatment.
Expand 64 Items
Tubing connectors, SVS, bent
Supplier: witeg Labortechnik
Tubing connection consisting of screw cap, hose connection with silicone seal and threaded tubes.
Expand 1 Items
Vespel/graphite ferrule
Supplier: Restek
Vespel/graphite ferrule, fitting size 0,8 mm, Hole Ø: 0,4 mm
Expand 2 Items
Capillary nuts
Supplier: Restek
These capillary nuts are ideal for Shimadzu 17A, 2010, and 2014 GCs.
Expand 2 Items
Blanking flanges
Supplier: EDWARDS HIGH VACUUM METTLER
Blanking flanges made of aluminium or stainless steel.
Expand 5 Items
Cross pieces
Supplier: EDWARDS HIGH VACUUM METTLER
Cross pieces made of aluminium or stainless steel.
Expand 6 Items
Fittings for Shimadzu LC systems
Supplier: Agilent
These fittings for Shimadzu HPLC systems provide leak-free connections and prevent the loss of peak shape and resolution.
Expand 7 Items
GC ferrules for Shimadzu
Supplier: Restek
Graphite two-piece construction. For Shimadzu 17A, 2010, and 2014 GCs.
Expand 3 Items
Metal adapters for flexible metalic tubing
Supplier: HWS LABORTECHNIK
Metal adapter with PT 100, for flexible metallic tubing.
Expand 1 Items
Injector/detector plug nuts
Supplier: Restek
These are used to cap off a detector and prevent hydrogen from accidentally diffusing into the oven from an unused detector base.
Expand 1 Items
MSD conversion fitting
Supplier: Restek
This conversion fitting is a flat, soft aluminum sealing ring deforms and butt-seals against the MSD interface. A standard Vespel® ferrule seals the column and 1,59 mm stainless steel nut.
Expand 1 Items
Ferrules, Alumaseal®
Supplier: Restek
These ferrules are made of aluminium eliminate out-gassing and make leak-tight seals for less detector noise. Its unique two-piece design permanently locks on fused silica tubing without causing breakage.
Expand 3 Items
Adapter ferrules, Valco®
Supplier: Restek
Fused silica adapter ferrules are made from valcon polyimide, a unique graphite reinforced composite that is specially made to maximise mechanical stability at temperatures up to 350 °C.
Expand 7 Items
Tubing connectors, T-shaped
Supplier: PIEPER FILTER
Mini connectors for tubing, made of PP, translucent, T-shape.
Expand 6 Items
Aspiration station Y-shaped tubing connector
Supplier: GILSON
The Gilson safe aspiration station Y-shaped tubing connector is for use with the Gilson safe aspiration station.
Expand 1 Items
Capillary column ferrules for gas chromatography
Supplier: Agilent
Graphpack 2M connector for column ID 0,53 mm
Expand 63 Items
Tubing connectors, straight, reducing
Supplier: PIEPER FILTER
PP, translucent.
Expand 12 Items
Ferrules for Thermo Scientific GCs
Supplier: Restek
Graphite Ferrules for Vu2 union connectors.
Expand 5 Items
MXT®-union connector kits for fused silica columns
Supplier: Restek
These MXT® union connectors kits are suitable for connecting metal and/or fused silica GC columns.
Expand 6 Items
Supplier: GRANT INSTRUMENTS
Supplier: BOCHEM
Supplier: VWR Collection
Supplier: OMEGA BIO-TEK
Supplier: DWK Life Sciences
Supplier: Thermo Fisher Scientific
Supplier: VWR Collection
Supplier: Oxford Nanopore Technologies
Supplier: Integra
Supplier: Industrial Physics
Supplier: AAT BIOQUEST
Supplier: Integra
Supplier: Palbam
Supplier: VWR Collection
Supplier: VWR Collection
Supplier: FACELLITATE
Supplier: NANOENTEK
Supplier: Greiner Bio-One