You searched for: Fittings and Connectors
These fittings for high-pressure connections are designed for tightening by hand or with compatible tools. The male and female fittings available will secure connections between instruments . Available in different sizes, shapes, and materials of fabrication, these fittings can be tailored to be suitable for any unique laboratory equipment setup. Fittings are suitable for use under extensive temperature ranges and are manufactured from stainless steel or plastic polymers for excellent strength.
Double connector, click-on in-line super clean®
Supplier: Restek
Double connectors are used to effectively connect any click-on trap to a click-on indicator.
Expand 1 Items
Elbows, aluminum
Supplier: EDWARDS HIGH VACUUM METTLER
Elbows 90°, DN 16 mm, Aluminium
Expand 3 Items
Tubing connectors, Y-shaped
Supplier: KOHLER
Tubing connectors connect fluid carrying lines reliably. Can be used in motor vehicles as well as in every industrial application.
Expand 11 Items
GC column-mass spectrometer connector, EZ No-Vent®
Supplier: Restek
A critical orifice in the EZ No-Vent® connector minimizes the amount of oxygen allowed into the MS source, eliminating the need for purge gas required. This enables to skip the lengthy vent and pump-down cycle.
Expand 7 Items
GC ferrules, Graphite Vespel®
Supplier: Restek
These ferrules can be used with Vacuum Vu-Union® connectors.
Expand 4 Items
Capillary nuts
Supplier: Restek
These capillary nuts are ideal for Shimadzu 17A, 2010, and 2014 GCs.
Expand 2 Items
Connectors and ferrules, Gerstel GRAPHPACK® 3D/2
Supplier: Restek
GRAPHPACK® technology provides a complete system that quickly and reliably makes a leak-tight, low-dead-volume connection. The central component is a metal-jacketed graphite ferrule - the ideal seal for GC applications.
Expand 5 Items
Vu-tight installation fittings kit
Supplier: Restek
This kit includes a ¹/₄" stainless steel nut and graphite ferrule for attaching the liner to the GC inlet and a ¹/₄ to ¹/₁₆" stainless steel reducer, plus a ¹/₄" and 0,5 mm ID graphite ferrule for attaching the column to the liner.
Expand 1 Items
Fittings, secure-fit
Supplier: Restek
Secure-Fit provides a good connection between HPLC components for trouble-free chromatography.
Expand 9 Items
Fitting kits, Swagelok®
Supplier: Restek
This Swagelok® fitting kits includes the most common assortment of ¹/₈" and ¹/₄" brass fittings.
Expand 1 Items
Reducing pieces for NW flanges
Supplier: EDWARDS HIGH VACUUM METTLER
Reducing pieces made of aluminium.
Expand 2 Items
Capillary inlet adaptor fitting kit
Supplier: Restek
This capillary inlet adaptor fitting kit is ideal for split/splitless fitting for capillary columns.
Expand 1 Items
Vespel/graphite ferrule
Supplier: Restek
Vespel/graphite ferrule, fitting size 0,8 mm, Hole Ø: 0,4 mm
Expand 2 Items
Luer lock valve adaptors
Supplier: Restek
These Luer lock valve adaptors are suitable for connecting a Luer lock fitting to a Rheodyne or Valco valve.
Expand 1 Items
Fittings, InfinityLab
Supplier: Agilent
InfinityLab Quick Connect fittings are 'finger-tight' reusable fittings for UHPLC, stable to 1300 bar.
Expand 14 Items
Connectors, Press-Tight®
Supplier: Restek
Deactivated Press-Tight® connectors maintain complete inertness along the GC flow path and Siltek®-deactivated connectors are ideal for organochlorine pesticides analysis. These connectors fit 0,33 to 0,74 mm ext. Ø and 0,1 to 0,53 int. Ø columns.
Expand 17 Items
Reducing pieces for NW flanges
Supplier: EDWARDS HIGH VACUUM METTLER
Reducing pieces made of stainless steel.
Expand 3 Items
Blanking flanges
Supplier: EDWARDS HIGH VACUUM METTLER
Blanking flanges made of aluminium or stainless steel.
Expand 5 Items
Ferrules for gas chromatography
Supplier: VARIAN
Vespel/graphite and precision graphite ferrules for chromatography applications.
Expand 5 Items
Fingertight capillary column nuts
Supplier: Restek
These fingertight capillary column nuts rapidly tighten without wrenches and can be used with 0,25, 0,32, or 0,53 mm ID columns.
Expand 2 Items
PTFE ferrules
Supplier: Restek
PTFE ferrule with fitting size 1,6 mm, PTFE, Hole Ø: 1,6 mm
Expand 5 Items
One-piece fingertight fittings
Supplier: VARIAN
PEEK fittings resists pressure up to 5000 psi and temperature of 100 °C.
Expand 3 Items
Cross pieces
Supplier: EDWARDS HIGH VACUUM METTLER
Cross pieces made of aluminium or stainless steel.
Expand 6 Items
Adapter, for reaction vessels
Supplier: HWS LABORTECHNIK
Metal adapter, M 16×1 thread, with A execution, Metal
Expand 8 Items
Injector nut kit
Supplier: Restek
Injector nut kit for Shimadzu 17A, 2010, and 2014 GCs.
Expand 1 Items
GC capillary column connectors, Swagelok®
Supplier: Restek
Parker's fittings are ideal for installing new equipment, modifying existing instrumentation or replacing worn connections.
Expand 80 Items
Fittings, CGA
Supplier: Restek
CGA-specified nuts and nipples with internal frit, 6,35mm NPT nickel-plated brass.
Expand 3 Items
Capillary column caps
Supplier: Restek
These non-reusable column caps increase column lifetime, prevent moisture and air from entering the column during storage.
Expand 2 Items
Ferrules, GRAPHPACK®
Supplier: Restek
GRAPHPACK® technology provides a complete system that quickly and reliably makes a leak-tight, low-dead-volume connection.
Expand 2 Items
Supplier: EPPENDORF
Supplier: Integra
Supplier: OZ BIOSCIENCES
Supplier: VWR Collection
Supplier: Corning
Supplier: SenseAnywhere
Supplier: Integra
Supplier: NANOENTEK
Supplier: VWR Collection
Supplier: Integra
Supplier: Testo
Supplier: Sartorius
Supplier: SenseAnywhere
Supplier: Quantabio