You searched for: Samplers

Supplier: BURKLE

TeleScoop is a versatile sampling system with exchangeable tools for a wide range of applications. The tools (angular beaker, pendulum beaker, bottle holder, stainless steel beaker and dip net) are attached to the telescopic rod by a practical snap-in joint. Ideal for sampling from baths, tanks, shafts, open water courses. Sampling depths down to 6 m can be reached with the adjustable telescopic aluminium rod.

Supplier: BURKLE

Made of stainless steel or PP, transparent, sample bottles made of PE. The QuickPicker is appropriate when bulk goods are withdrawn directly from sacks, bags or open containers. The sample is filled directly into sample bottles. Sampling depth 300 mm, Ø 25 mm, length 500 mm, 75 ml volume.

Supplier: BURKLE

Very robust model with specially hardened forged drill bits. For determining soil properties, moisture and structure. The shape of the Mole‘s drill bits ensures minimum friction when drilling and removing the Mole from the ground.The Mole has different components. Handle with 75 cm rod, extension rod 100 cm if necessary and one of seven available drill bits, each of which is designed for a particular soil type. The components can be combined without any problems. Extension rods can extend the working depth of the Mole down to 5 m. Please order drill bits seperately.

Supplier: NASCO FORT ATKINSON

Sample bottles of various sizes are held via an adjustable locking device.

Supplier: BURKLE

Stainless steel AISI 316 L (1,4404). The MicroSampler has been specially designed for the sampling of small quantities of powder.

Supplier: BURKLE

The sample liquid only comes into contact with the suction hose and the original sample bottle. Cross-contamination is greatly reduced. Immediately after taking the sample, the bottles are sealed.
● PE MiniSampler for general sampling
● PTFE MiniSampler for ultra-pure sampling

Supplier: BURKLE

Sampler for deep-frozen products in the food and luxury items sector, and for semi-solid substances. The very robust hollow drill cuts quickly into the sample material with its sharp sawing crown. A sample cylinder (cross-section sample) can be cut out.

Supplier: BURKLE

The sample drill for stalk material is a sampler especially for hay, silage, straw, herbs, bushes or other stalky plant dry material where other drills quickly get tangled. The special geometry of the drill tip cuts effectively and quickly into different stalky materials.

Supplier: Spectrum Laboratories

Disposable tubes for liquid and solid samples with one hand. The sample to be transfered is inserted with harvester and discharged using the plunger.

Supplier: BURKLE

Guarantees precise zone sampling through all layers of the sample. The spiral arrangement of the sampling slits means that these are opened one after the other from bottom to top. In this way the lowest opening is filled first and then those above it in sequence until the complete Spiralus has been filled. The shape of the sampling slits prevents seeds from being cut up. The Spiralus provides an excellent all-layer sample.

Supplier: BURKLE

Cylindrical hollow drill with a sharp cutting edge, can easily be driven into paste-like and semi-solid substances. The samples cut out are subsequently removed with the appropriate push-rod ejector.

Supplier: BURKLE

Plunging siphons for the simple removal of liquid samples.

Supplier: VWR Collection

Cylindrical probe for the proper sampling of frozen products packed in bulk - to be used with electrical drill - suitable for collecting frozen goods. Ideal to use in the food industry and for health authorities. Method of use: Probe is fixed to an electric drill. The drill is activated and then pushed against the frozen surface to be sampled. The sampling is made easy by the anti-clockwise rotation of the drill. The 'carrot' is extracted from the probe with a rod and pushed into the sampling container. All these operations are aseptically performed in case of microbiological analysis.

Supplier: Sampling Systems

Stainless steel cup samplers designed for liquids and suspensions.

Supplier: Sampling Systems

These all layer samplers have a robust all stainless steel construction and are suitable for sampling free flowing powders, granules and even slightly cohesive powders.

Supplier: Sampling Systems

This pump sampler set is ideal for contamination-free liquid sampling.

Supplier: Sampling Systems

Coliwasa samplers for use in the industry.

Supplier: Sampling Systems

The U-D sleeve sampler was developed for accurate unit dose samples (small volume).

Supplier: Sampling Systems

Snapper sediment sampler for taking environmental samples.

Supplier: Sampling Systems

The UD Sleeve sampler is perfect for small volume powder sampling.

Supplier: Sampling Systems

Essential for sampling with Sub Samplers and bailers.

Supplier: Sampling Systems

Disposable samplers specially designed for powders and granules.

Supplier: Sampling Systems

The Liquid Master has been designed to be quickly stripped down for cleaning.

Supplier: Sampling Systems

The cohesive pocket sampler is designed for taking discreet samples of cohesive powders.

Supplier: Sampling Systems

U-D Master is designed for sampling free flowing powders. By simply changing the sample insert cells, different volumes can be sampled.

Supplier: Sampling Systems

These viscous samplers are designed for creams, shampoos, soaps, honey and other semi-viscous materials.

Supplier: Sampling Systems

The MicroThief powder sampler is designed for the sampling of very small volumes of free-flowing powders.

Supplier: Sampling Systems

The mono pocket sampler is designed for sampling free-flowing powders and granules from a single point.

Supplier: Sartorius

MD8 air samplers, MD8 airscan and portable AirPort MD8 for detection of airborne microorganisms.

Supplier: Sampling Systems

The SteriWare® sack and bag sampler is perfect for taking samples from sacks and bags. This sampler is ideal for fast quality checks through the sides of the sacks.