You searched for: Gas Tubes

Supplier: Merck

ORBO™ sorbent tubes contain two beds of the same selective adsorbent seperated by glass wool or foam, for gas and vapor sampling.

Supplier: LENZ LABORGLAS GMBH & CO.KG

Gas distribution tubes with lateral ring made of borosilicate glass 3,3.

Supplier: ROBU GLASFILTER

These versatile and recyclable tubes offer excellent properties for diverse applications are made of borosilicate glass 3.3.

Supplier: DWK Life Sciences

These gas distribution tubes are designed for reactions between gases and liquids. They are made of clear DURAN® borosilicate glass 3.3.

Supplier: LENZ LABORGLAS GMBH & CO.KG

Gas distribution tubes with central ring made of borosilicate glass 3.3.

Supplier: GASTEC

Crystal clear gas tubes with distinct colour changes.

Supplier: GASTEC

The dositubes are used to measure time-weighted average (TWA) gas concentrations over longer periods.

Supplier: Dräger

Desorption stroke in clean air.

Supplier: Dräger

To measure the 'spot concentrations' of phoshine for use with an Accuro® pump.

Supplier: Bel-Art Products, a Part of SP

HDPE gas dispersion tube. Bell-mouthed fitting with a sealed-in, coarse porosity Fritware® PE disc at the large end.

Supplier: Dräger

To measure the 'spot concentrations' of ethylene oxide.

Supplier: Dräger

These test sets allow for the semi quantitative measurements of five different gases at the same time.

Supplier: Dräger

To measure the 'spot concentrations' of alcohol for use with an Accuro pump.

Supplier: Dräger

To measure the 'spot concentrations' of trichloroethylene in water and waste water for use with an Accuro® pump. Uses include determination and measurement of concentration peaks, personal exposure in the inhalation area, detection of leaks in pipelines or gas installations, air analysis in sewers, shafts and confined spaces.

Supplier: Dräger

To measure the 'spot concentrations' of hydrochloric acid in the air with an Accuro® pump - Uses include determination and measurement of concentration peaks, personal exposure in the inhalation area, detection of leaks in pipelines or gas installations, air analysis in sewers, shafts and confined spaces.

Supplier: Dräger

The data below is representative for use with an Accuro® pump, a hand operated bellows pump.

Supplier: Dräger

Operating conditions: 0 to 40 °C ; up to 30 mg/l H₂O and for tube 5/a: 3 to 15 mg/l H₂O absolute humidity.

Supplier: Dräger

To measure the 'spot concentrations' of water vapour for use with an Accuro® pump.

Supplier: Dräger

To measure the 'spot concentrations' of hydrocarbons with an Accuro® pump.

Supplier: Dräger

To measure the 'spot concentrations' of diesel fuel. Uses include determination and measurement of concentration peaks, personal exposure in the inhalation area, detection of leaks in pipelines or gas installations and air analysis in sewers, shafts and confined spaces.

Supplier: Dräger

To measure the 'spot concentrations' of chlorine dioxide with an Accuro® pump. Uses include determination of concentration peaks, personal exposure in the inhalation area, detection of leaks in pipelines or gas installations, air analysis in sewers, shafts and confined spaces. The following values are not displayed:

Supplier: Dräger

Qualitative determination of oxidisable substances including measurement of concentration peaks, personal exposure in the inhalation area, detection of leaks in pipelines or gas installations, air analysis in sewers, shafts and confined spaces.

Supplier: Dräger

To measure the 'spot concentrations' of xylene for use with an Accuro® pump. Cross sensitivity: Styrene, vinyl acetate, toluene, ethyl benzene and acetaldehyde are indicated, but with different sensitivities. No interference by:

Supplier: Dräger

To measure the 'spot concentrations' of perchloroethylene for use with an Accuro pump. Uses include determination and measurement of concentration peaks, personal exposure in the inhalation area, detection of leaks in pipelines or gas installations, air analysis in sewers, shafts and confined spaces.

Supplier: Dräger

To measure the 'spot concentrations' of carbon dioxide for use with an Accuro® pump. Uses include determination and measurement of concentration peaks, personal exposure in the inhalation area, detection of leaks in pipelines or gas installations, air analysis in sewers, shafts and confined spaces.

Supplier: Dräger

To measure the 'spot concentrations' of carbon monoxide for use with an Accuro pump. Uses include determination and measurement of concentration peaks, personal exposure in the inhalation area, detection of leaks in pipelines or gas installations, air analysis in sewers, shafts and confined spaces.

Supplier: Dräger

To measure the 'spot concentrations' of cyanide. After carrying out the ten strokes the reagent ampoule must be broken, the liquid transferred onto the white separating layer and carefully drawn through with two strokes in cyanide free air using the pump. The indicating layer must not become moist.

Supplier: Dräger

To measure the 'spot concentrations' of carbon dioxide for use with an Accuro® pump. Uses include determination and measurement of concentration peaks, personal exposure in the inhalation area, detection of leaks in pipelines or gas installations, air analysis in sewers, shafts and confined spaces.

Supplier: Dräger

To measure the 'spot concentrations' of ammonia including determination of concentration peaks, personal exposure in the inhalation area, detection of leaks in pipelines or gas installations, air analysis in sewers, shafts and confined spaces. For use with an Accuro® pump. Other basic substances such as organic amines are indicated as well. For Ammonia 2/a, 5/a, 5b, the indication is not affected by :

Supplier: Dräger

To measure the 'spot concentrations' of hydrogen sulphide for use with an Accuro® pump. Uses include determination and measurement of concentration peaks, measurement of personal exposure in the inhalation area, detection of leaks in, for example, pipelines or gas installations, and air analysis in sewers, shafts and confined spaces.