You searched for: Chromatography Supplies

Supplier: Agilent

These sample and skimmer cones are equivalent to those from PerkinElmer ICP-MS for complete confidence.

Supplier: Agilent

These skimmer and sample cones are equivalent to those from PerkinElmer ICP-MS for complete confidence.

Supplier: Agilent

These performance maintenance kits for Waters HPLC systems contain all the normal wear parts, tools for disassembly/reassembly, and instructions necessary to keep your systems operating at peak performance.

Supplier: Agilent

The InfinityLab flex bench family includes the InfinityLab flex bench system and the InfinityLab benchtop system.

Supplier: Agilent

These starter kits contain the most widely used capillary tubing, Swagelok connectors, and fittings in a variety of sizes.

Supplier: Restek

This column protection system has three levels of protection: filter only, cartridge only, or filter and cartridge.

Supplier: Restek

These adapters are made of high quality stainless steel.

Supplier: Agilent

These PEEK sample loops are inert to most organic solvents. The stainless-steel sample loops are not interchangeable due to the change in port angle.

Supplier: VARIAN

Solid phase microextraction (SPME) is a technique for extracting analytes from solid, liquid or gaseous samples by adsorbing them onto the SPME fiber and then desorbing them into an inlet, either on a gas chromatograph (GC) or an HPLC system. SPME is amenable to automation using an autosampler or it can be performed manually as well.

Supplier: Restek

These Vu-tight Direct injection (DI) liners are suitable for 6,35 mm packed injection port conversion. They are available in two designs and fit 0,32 and 0,53 mm ID capillary columns (column outer diameter from 0,5 mm to 0,8 mm).

Supplier: Restek

For use with Parker Balston® zero air generators.

Supplier: Restek

These capillary dedicated FID replacement jet for Agilent 5890/6850/6890 GCs are available in standard, high-temperature or Siltek treated high-performance versions.

Supplier: Restek

The oven sensors works in conjunction with the oven control board to regulate oven temperature.

Supplier: Restek

This direct injection liner adapter uses standard 1,59 mm capillary nut and ferrules. Can be used with Agilent or Restek direct injection glass inserts or Restek direct injection uniliner liners for an Agilent 5890 packed column GC.

Supplier: Agilent

QuickPick split inlet PM kit, with 5 non-stick BTO septa, 1 split liner, 1 non-stick liner O-ring and inlet gold seal kit

Supplier: Agilent

High quality off-axis design ion lenses separate ions from photons and residual neutral material resulting in lower background noise in 7500 ICP-MS systems.

Supplier: Agilent

These torches for PerkinElmer ICP-OES are available in a wide range of styles from 0 to 3 slots, depending on the instrument and your application needs.

Supplier: Agilent

Agilent burner components for PerkinElmer AA systems are designed to provide the best precision, efficient drainage, minimal burner blockage, and reduced interferences.

Supplier: Agilent

These support adaptors are fully compatible with your PerkinElmer ICP-MS.

Supplier: Agilent

The Agilent sampling probe is equivalent to the PerkinElmer AA version, and is robust in daily use.

Supplier: Agilent

The micro ECD has a detection zone volume 10 times smaller than any other ECD with replicable inlet liner to decreasing column contamination of the cell.

Supplier: Restek

This HPLC PEEK performance kit is a useful complement for the HPLC system.

Supplier: Restek

Accelerated solvent extraction is a common technique for fast and reliable extraction of organic materials from solid matrices, using EPA SW-846 method 3545 and pressurised fluid extraction (PFE).

Supplier: Restek

This sample delivery system is used to transfer large volumes of low viscosity samples directly from a bottle to a solid phase extraction cartridge or to a disk on a vacuum manifold system for extraction or cleanup.

Supplier: Restek

FID maintenance kits for use with Agilent 6850, 6890, and 7890 GCs.

Supplier: Agilent

These pistons are made from a high purity, mono-crystalline sapphire for maximum durability.

Supplier: Agilent

The 5100 ICP-OES features a plug and play torch, and a simple and effective torch-loader mechanism. This automatically aligns the torch and connects the gases to ensure fast start-up and reproducible performance.

Supplier: Agilent

PEEK seat tubing, 0,17 mm I.Ø, 100 mm, 2,3 μl

Supplier: Agilent

The electron multiplier converts incident ions into an amplified electric current used to record measurements of the ion signal in ICP-MS Systems.

Supplier: Agilent

These support adaptors are fully compatible with your PerkinElmer ICP-OES.