You searched for: Chromatography Supplies

Supplier: Restek

Z-Belt for use with Agilent 7673B and 7683 autosamplers.

Supplier: Restek

This kit contains the tubing and fittings needed to add an additional GC to lab bench.

Supplier: Restek

FID/NPD capillary adapter fitting, high-quality stainless steel, for Agilent 5890/6850/6890 GC's

Supplier: Restek

Injector mounting post for Agilent 7673 series autosamplers, for use with 6890 GCs

Supplier: Restek

Flow splitters with fluid resistor technology eliminate the adjustments to the capillary tubing for optimising split ratio with wide range of interchangeable resistors.

Supplier: VARIAN

SPME fibers are available in a range of chemistries, formats, and for use with autosamplers or manual injections.

Supplier: Restek

These direct injection glass inserts are suitable for 6,35 mm packed column injection ports.

Supplier: VARIAN

RheBuild® kits containing genuine Rheodyne® parts are available for most Rheodyne® products. RheBuild® kits eliminate the need to order individual parts.

Supplier: Restek

This easy to use adapter fitting is sturdy and made of compact stainless steel.

Supplier: Agilent

These ion lenses are equivalent to the PerkinElmer ICP-MS versions for complete confidence.

Supplier: Agilent

These coils are equivalent to PerkinElmer ICP-MS coils for complete confidence.

Supplier: Restek

This column protection system has three levels of protection: filter only, cartridge only, or filter and cartridge.

Supplier: Restek

These adapters are made of high quality stainless steel.

Supplier: Agilent

These PEEK sample loops are inert to most organic solvents. The stainless-steel sample loops are not interchangeable due to the change in port angle.

Supplier: VARIAN

Solid phase microextraction (SPME) is a technique for extracting analytes from solid, liquid or gaseous samples by adsorbing them onto the SPME fiber and then desorbing them into an inlet, either on a gas chromatograph (GC) or an HPLC system. SPME is amenable to automation using an autosampler or it can be performed manually as well.

Supplier: Restek

These Vu-tight Direct injection (DI) liners are suitable for 6,35 mm packed injection port conversion. They are available in two designs and fit 0,32 and 0,53 mm ID capillary columns (column outer diameter from 0,5 mm to 0,8 mm).

Supplier: Restek

For use with Parker Balston® zero air generators.

Supplier: Restek

These capillary dedicated FID replacement jet for Agilent 5890/6850/6890 GCs are available in standard, high-temperature or Siltek treated high-performance versions.

Supplier: Restek

The oven sensors works in conjunction with the oven control board to regulate oven temperature.

Supplier: Restek

This direct injection liner adapter uses standard 1,59 mm capillary nut and ferrules. Can be used with Agilent or Restek direct injection glass inserts or Restek direct injection uniliner liners for an Agilent 5890 packed column GC.

Supplier: Restek

This HPLC PEEK performance kit is a useful complement for the HPLC system.

Supplier: Restek

Accelerated solvent extraction is a common technique for fast and reliable extraction of organic materials from solid matrices, using EPA SW-846 method 3545 and pressurised fluid extraction (PFE).

Supplier: Restek

This sample delivery system is used to transfer large volumes of low viscosity samples directly from a bottle to a solid phase extraction cartridge or to a disk on a vacuum manifold system for extraction or cleanup.

Supplier: Restek

FID maintenance kits for use with Agilent 6850, 6890, and 7890 GCs.

Supplier: Agilent

The micro ECD has a detection zone volume 10 times smaller than any other ECD with replicable inlet liner to decreasing column contamination of the cell.

Supplier: Agilent

Split trap vent replacement kit (2 filters and 4 O-rings)

Supplier: Agilent

These pistons are made from a high purity, mono-crystalline sapphire for maximum durability.

Supplier: Agilent

High quality off-axis design ion lenses separate ions from photons and residual neutral material resulting in lower background noise in 7500 ICP-MS systems.

Supplier: Agilent

These torches for PerkinElmer ICP-OES are available in a wide range of styles from 0 to 3 slots, depending on the instrument and your application needs.

Supplier: Agilent

Agilent burner components for PerkinElmer AA systems are designed to provide the best precision, efficient drainage, minimal burner blockage, and reduced interferences.