You searched for: Petroleum Industry Standards
Developed to facilitate successful international trades, petroleum industry standards evaluate the properties of naturally occurring energy resources. Whether testing in refineries, processing plants, or production sites, the solutions ensure compliance requirements are always met. The liquids serve as the technical basis for safety level regulations and mitigating equipment failure risks. By enhancing operational excellence in machinery, the high quality petroleum industry standards inherently reduce any environmental impact and consumer costs.
JP-4 military fuel standards
Supplier: Restek
Certified reference materials (CRMs) manufactured and QC-tested in ISO-accredited labs satisfies ISO requirements.
Expand 9 Items
NW TPH-HCID surrogate mix (2 components)
Supplier: Restek
The mix consists of (C25) n-pentacosane, 1-bromo-4-fluorobenzene (BFB).
Expand 1 Items
Certified PAHs in diesel
Supplier: Restek
The mix consists of, acenaphthene, 2-methylnaphthalene, acenaphthylene, fluorene, naphthalene, 1-methylnaphthalene and phenanthrene.
Expand 1 Items
Why Choose Corning Fetal Bovine Serum?
Our vertically integrated FBS serum supply chain, from collection to scientist, allows us to provide a consistent supply of FBS.
TX TPH matrix spike mix (2 components)
Supplier: Restek
The mix consists of diesel fuel #2 composite, unleaded gasoline composite.
Expand 1 Items
Kerosene composite standards
Supplier: Restek
Kerosene composite standards are comprised of three separate sources blended in equal portions. It may exhibit lot-to-lot variation.
Expand 9 Items
Used motor oil composite standard
Supplier: Restek
Prepared from an equal-volume blend from five gasoline-powered vehicles. After blending, a precisely weighed amount of the composite is added to a volumetric flask to produce the standard. Motor Oil standards may exhibit lot-to-lot variation.
Expand 1 Items
Calibration mix D3710-95 (16 components)
Supplier: Restek
These calibration mixtures are made with pure, highly characterized neat material and are prepared using NIST-traceable balances and weights. Each ampul is supplied with a data sheet indicating the exact concentration and a sample chromatogram.
Expand 1 Items
DRO/ORO range calibration standard, (12 components)
Supplier: Restek
This consists of n-decane (C10), n-dodecane (C12), n-tetradecane (C14), n-hexadecane (C16), n-octadecane (C18), n-eicosane (C20) ,n-docosane (C22) , n-tetracosane (C24), n-hexacosane (C26), n-octacosane (C28), n-triacontane (C30) and n-dotriacontane (C32).
Expand 1 Items
Calibration gas cylinders
Supplier: M S A
The gas mixture in calibration gas cylinder is certified to be prepared gravimetrically, using NIST traceable weights. The lot number and nominal value of the gas constituents in volume, percent by mass, PPM, or volume is specified on the cylinder.
Expand 1 Items
Residual Solvents Class 2 - Mix B (8 components)
Supplier: Restek
The solvents consists of (C6) n-hexane (290 μg/ml), chloroform (60 μg/ml), 1,2-dimethoxyethane (100 μg/ml), 2-hexanone (50 μg/ml), nitromethane (50 μg/ml), pyridine (200 μg/ml), tetralin (100 μg/ml), trichloroethene (80 μg/ml).
Expand 1 Items
MA VPH matrix spike mix with surrogate rev. 1.1 (July 2004) (16 components)
Supplier: Restek
The mix consists of (C5) n-pentane, (C9) n-nonane, (C10) n-decane, benzene, n-butylcyclohexane, 2,5-dibromotoluene (SS), ethylbenzene, 2-methylpentane, methyl tert-butyl ether, naphthalene, toluene, 1,2,4-trimethylbenzene, 2,2,4-trimethylpentane, m-xylene, o-xylene, p-xylene.
Expand 1 Items
Weathered diesel fuel #2 kit
Supplier: Restek
The kit consists of different standards.
Expand 1 Items
ASTM D3606 calibration standard #6 with sec-butanol internal standard (3 components)
Supplier: Restek
Consists of three components, those are benzene, 2-butanol and toluene.
Expand 1 Items
ASTM D3606 calibration standard #7 with sec-butanol internal standard (3 components)
Supplier: Restek
Consists of three components, those are benzene, 2-butanol and toluene.
Expand 1 Items
DHA isoparaffins standard
Supplier: Restek
This standard is produced for refineries performing Detailed Hydrocarbon Analysis (DHA) of crude oil feedstocks and fuels.
Expand 1 Items
ASTM D3606 calibration standard #4 without internal standard (2 components)
Supplier: Restek
The mix consists of benzene (0,67% vol/vol), toluene (5% vol/vol).
Expand 1 Items
DHA paraffins standard
Supplier: Restek
This standard is produced for refineries performing Detailed Hydrocarbon Analysis (DHA) of crude oil feedstocks and fuels.
Expand 1 Items
ASTM® D3606 calibration standard #5 without internal standard (2 components)
Supplier: Restek
The mix consists of benzene (0,33% vol/vol), toluene (2,5% vol/vol).
Expand 1 Items
Jet fuel A standards
Supplier: Restek
Certified reference materials (CRMs) manufactured and QC-tested in ISO-accredited labs satisfies ISO requirements.
Expand 9 Items
Gasoline surrogate and internal standards, VOA Mixes
Supplier: Restek
Certified reference materials (CRMs) manufactured and QC-tested in ISO-accredited labs satisfies ISO requirements.
Expand 6 Items
PA DEP UST standard (11 components)
Supplier: Restek
Standard contains benzene, 1,2-dibromoethane (EDB), 1,2-dichloroethane, ethylbenzene (100-41-4), isopropyl benzene (cumene), methyl tert-butyl ether (MTBE), naphthalene, toluene, m-xylene, o-xylene, p-xylene.
Expand 1 Items
Fuel Oil #4 Standards (ASTM D-445)
Supplier: Restek
Fuel oil #4 is typically used in limited applications in which the fuel cannot be preheated prior to burning. The fuel is a blend of distillate (fuel oil #2) and residual (fuel oil #6).
Expand 2 Items
Alaska UST method AK101AA
Supplier: Restek
The alaska UST method consists of 14 components they are benzene, ethylbenzene, 1-ethyl-2-methylbenzene, 1-ethyl-3-methylbenzene, 1-ethyl-4-methylbenzene, isopropylbenzene (cumene), n-propylbenzene, toluene, 1,2,3-trimethylbenzene, 1,2,4-trimethylbenzene, 1,3,5-trimethylbenzene, m-xylene, o-xylene and p-xylene.
Expand 1 Items
Supelco® Cloud point standards
Supplier: Merck
Cloud point standard, Supelco®, ASTM D 2500; NF EN23015
Expand 2 Items
Calcinated petroleum coke - trace elements
Supplier: LGC Standards PROMOCHEM
This reference standard is intended primarily for use in the calibration of apparatus and the evaluation of techniques employed in the analysis of calcined petroleum coke and other materials with a similar matrix.
Expand 1 Items
Total Acid Number (TAN) Standards
Supplier: CUSTOM MADE CHEMICALS LAB
Total acid number TAN 17034, 2 mg KOH/g
Expand 4 Items
Petroleum standards, heavy mineral oils, CRM
Supplier: LGC Standards PROMOCHEM
This matrix material solution is intended for use as a diluent for other metallo-organic standards.
Expand 2 Items
Gasoline fuel dilution standards, VHG
Supplier: LGC Standards PROMOCHEM
This standard is intended for use in the determination of gasoline in used gasoline engine oil by gas chromatography (GC), IR, fuel dilution meter (fuel sniffer) and flash point analyser.
Expand 1 Items
Elemental analysis standards, soot content standards, VHG
Supplier: LGC Standards PROMOCHEM
This reference or calibration standard is intended for use in the determination of soot in diesel motor oil by infrared spectroscopy and other technique.
Expand 6 Items
Cetane number standard, ASTM D 613, Supelco®
Supplier: Merck
Cetane Number standard, 52,6, Supelco®, ASTM D 613
Expand 1 Items
Supplier: GRANT INSTRUMENTS
Supplier: BOCHEM
Supplier: VWR Collection
Supplier: OMEGA BIO-TEK
Supplier: DWK Life Sciences
Supplier: Thermo Fisher Scientific
Supplier: VWR Collection
Supplier: Oxford Nanopore Technologies
Supplier: Integra
Supplier: Industrial Physics
Supplier: AAT BIOQUEST
Supplier: Integra
Supplier: Palbam
Supplier: VWR Collection
Supplier: VWR Collection
Supplier: FACELLITATE
Supplier: NANOENTEK
Supplier: Greiner Bio-One