You searched for: Petroleum Industry Standards

Supplier: Restek

Consists of three components, those are benzene, 2-butanol and toluene.

Supplier: Restek

This standard is produced for refineries performing Detailed Hydrocarbon Analysis (DHA) of crude oil feedstocks and fuels.

Supplier: Restek

These solutions are prepared from a single-source (one-refinery) product.

Supplier: Restek

Confirms unleaded gasoline TPH, BTEX and aromatics in single analysis.

Supplier: Restek

The mix consists of diesel fuel #2 composite, unleaded gasoline composite.

Supplier: Restek

A mineral oil-based transformer oil (Exxon® Univolt® N-61), which has been tested to ensure it is PCB-free.

Supplier: EHRENSTORFER

Bio diesel fuel, Reference standard

Supplier: Restek

Diesel fuel #2 composite and Motor oil.

Supplier: Restek

The mix consists of benzene (5% vol/vol), toluene (20% vol/vol).

Supplier: Restek

ASTM D3606 calibration standard #7 with MEK internal standard, isooctane includes benzene, 0,0576%, 2-butanone, 4%, toluene 0,48%, Pk Info: 1 ml/ampoule

Supplier: Restek

Contains two components, those are n-hexadecane and stearic acid.

Supplier: Restek

Certified reference materials (CRMs) manufactured and QC-tested in ISO-accredited labs satisfy your ISO requirements.

Supplier: Restek

Designed to serve as a column resolution text mixture, as well as a calibration mixture for retention time (RT) versus boiling point (bp) calibration.

Supplier: Restek

Unleaded gasoline composite standards are comprised of three separate sources each of 87, 89, and 93 octanes blended in equal portions.

Supplier: Restek

Diesel fuel composite standards are comprised of three separate sources blended in equal portions. It may exhibit lot-to-lot variation.

Supplier: Restek

GRO mix (EPA) with 9 components, includes benzene, 1, 2, 4-trimethylbenzene, ethylbenzene, 2, 2, 4-trimethylpentane, heptane, m-xylene, 2-methylpentane, o-xylene, toluene, in purge and trap methanol, 1 ml/ampule

Supplier: Restek

The mix consists of, (C8) n-octane, (C10) n-decane, (C12) n-dodecane, (C16) n-hexadecane, (C21) n-heneicosane, (C34) n-tetratriacontane.

Supplier: Restek

These solutions are prepared from a single-source (one-refinery) product. The weathered materials indicate the percent weight loss from the original material. Samples of regular- and premium-grade unleaded gasoline were collected, then blended in equal volumes.

Supplier: Restek

DRO mix (EPA/wisconsin) with 10 components, includes n-decane (C10), n-eicosane (C20), n-dodecane (C12), n-docosane (C22), n-tetradecane (C14), n-tetracosane (C24), n-hexadecane (C16), n-hexacosane (C26), n-octadecane (C18), n-octacosane (C28), with 2000 μg/ml each in methylene chloride in 1 ml/ampule

Supplier: Restek

D2887 calibration mix contains compound, conc.; (C6) n-hexane (110-54-3), 6% w/w; (C7) n-heptane (142-82-5), 6% w/w; (C8) n-octane (111-65-9), 8% w/w; (C9) n-nonane (111-84-2), 8% w/w; (C10) n-decane (124-18-5), 12% w/w; (C11) n-undecane (1120-21-4), 12% w/w; (C12) n-dodecane (112-40-3), 12% w/w; (C14) n-tetradecane (629-59-4), 12% w/w; (C16) n-hexadecane (544-76-3), 10% w/w; (C18) n-octadecane (593-45-3), 5% w/w; (C20) n-eicosane (112-95-8), 2% w/w; (c24) n-tetracosane (646-31-1), 2% w/w; (c28) n-octacosane (630-02-4), 1% w/w; (C32) n-dotriacontane (544-85-4), 1% w/w; (C36) n-hexatriacontane (630-06-8), 1% w/w; (C40) n-tetracontane (4181-95-7), 1% w/w; (C44) n-tetratetracontane (7098-22-8), 1% w/w.

Supplier: Restek

The MA VPH matrix spike mix consists of 14 components they are (C5) n-pentane, (C9) n-nonane, benzene, 2,5-dibromotoluene (SS), ethylbenzene, 2-methylpentane, methyl tert-butyl ether (mtbe), naphthalene, toluene, 1,2,4-trimethylbenzene, 2,2,4-trimethylpentane (isooctane), m-xylene, o-xylene and p-xylene.

Supplier: Restek

The MA VPH standard consists of 14 components they are (C5) n-pentane 1000 μg/ml, (C9) n-nonane 1000 μg/ml, benzene 500 μg/ml, 2,5-dibromotoluene (SS) 1000 μg/ml, ethylbenzene 500 μg/ml, 2-methylpentane 1500 μg/ml, methyl tert-butyl ether (MTBE) 1500 μg/ml, naphthalene 1000 μg/ml, toluene 1500 μg/ml, 1,2,4-trimethylbenzene 1000 μg/ml, 2,2,4-trimethylpentane (isooctane) 1500 μg/ml, m-xylene 1,000 μg/ml, o-xylene 1,000 μg/ml and p-xylene 1,000 μg/ml.

Supplier: Restek

This is for total petroleum hydrocarbon pattern recognition of hydraulic oil.

Supplier: Restek

o-terphenyl, 2000 μg/ml in acetone, 1 ml/ampule, for internal standard

Supplier: Restek

This naphthenes standard is produced for refineries performing detailed hydrocarbon analysis (DHA) of crude oil feedstocks and fuels.

Supplier: Restek

SAE30 motor oil:SAE40 motor oil (1:1).

Supplier: Restek

This standard is produced for refineries performing Detailed Hydrocarbon Analysis (DHA) of crude oil feedstocks and fuels.

Supplier: Restek

Contains three components, those are benzene, 2-butanol (sec-butyl alcohol) and toluene.

Supplier: Restek

Stoddard solvent, a petroleum distillate mixture of C7-C12 hydrocarbons, consists of three major groups of components: linear and branched alkanes-also known as paraffins (30 to 50%); cycloalkanes-also called cycloparaffins or naphthenes (30 to 40%); and aromatic hydrocarbons (10 to 20%).

Supplier: Restek

The mix consists of (C6) n-hexane, (C8) n-octane, (C10) n-decane, (C12) n-dodecane, (C16) n-hexadecane, (C21) n-heneicosane, (C28) n-octacosane, (C35) n-pentatriacontane, (C36) n-hexatriacontane.