You searched for: Fittings and Connectors
These fittings for high-pressure connections are designed for tightening by hand or with compatible tools. The male and female fittings available will secure connections between instruments . Available in different sizes, shapes, and materials of fabrication, these fittings can be tailored to be suitable for any unique laboratory equipment setup. Fittings are suitable for use under extensive temperature ranges and are manufactured from stainless steel or plastic polymers for excellent strength.
Ferrules for gas chromatography
Supplier: VARIAN
Vespel/graphite and precision graphite ferrules for chromatography applications.
Expand 5 Items
Double connector, click-on in-line super clean®
Supplier: Restek
Double connectors are used to effectively connect any click-on trap to a click-on indicator.
Expand 1 Items
PTFE ferrules
Supplier: Restek
PTFE ferrule with fitting size 1,6 mm, PTFE, Hole Ø: 1,6 mm
Expand 5 Items
Tubing connectors, Y-shaped
Supplier: KOHLER
Tubing connectors connect fluid carrying lines reliably. Can be used in motor vehicles as well as in every industrial application.
Expand 11 Items
Biocompatible adapters
Supplier: VARIAN
Biocompatible adapter, 1/16” to 1/8”, PEEK, with fittings, PEEK
Expand 1 Items
GC capillary column connectors, Swagelok®
Supplier: Restek
Parker's fittings are ideal for installing new equipment, modifying existing instrumentation or replacing worn connections.
Expand 80 Items
GC column-mass spectrometer connector, EZ No-Vent®
Supplier: Restek
A critical orifice in the EZ No-Vent® connector minimizes the amount of oxygen allowed into the MS source, eliminating the need for purge gas required. This enables to skip the lengthy vent and pump-down cycle.
Expand 7 Items
Tubing connectors, X-shaped, PP
Supplier: SEMADENI
Tubing connectors, made of PP. Dimensions are shown as both nominal and exact as elasticity of tubing will influence the choice of size. Use our tubing selector 229-0111 to determine "grip". This will then give equivalent crest dimension for the particular connector concerned.
Expand 1 Items
Vespel/graphite ferrule
Supplier: Restek
Vespel/graphite ferrule, fitting size 0,8 mm, Hole Ø: 0,4 mm
Expand 2 Items
Fittings, brass and stainless steel, Parker®
Supplier: Restek
Parker® (A-Lok) fittings are ideal for installing new equipment, modifying existing instrumentation, or replacing worn connections. Fittings are available in brass or 316 grade stainless steel.
Expand 68 Items
Ferrules for single ferrule column connectors
Supplier: VARIAN
Ferrule, 0,53 mm to 0,53 mm ID, 15% graphite/85% Vespel®
Expand 5 Items
Vu-tight installation fittings kit
Supplier: Restek
This kit includes a ¹/₄" stainless steel nut and graphite ferrule for attaching the liner to the GC inlet and a ¹/₄ to ¹/₁₆" stainless steel reducer, plus a ¹/₄" and 0,5 mm ID graphite ferrule for attaching the column to the liner.
Expand 1 Items
Blanking flanges
Supplier: EDWARDS HIGH VACUUM METTLER
Blanking flanges made of aluminium or stainless steel.
Expand 5 Items
Connectors for PerkinElmer
Supplier: Agilent
These connectors are equivalent to the PerkinElmer AA versions, so you can be confident that they will integrate seamlessly with your PerkinElmer AA system.
Expand 7 Items
Cross pieces
Supplier: EDWARDS HIGH VACUUM METTLER
Cross pieces made of aluminium or stainless steel.
Expand 6 Items
GC capillary column connector, reducing union, Swagelok®
Supplier: Restek
Swagelok®, Reducing union, 1/4" to 1/16", Stainless steel
Expand 1 Items
Connectors and ferrules, Gerstel GRAPHPACK® 3D/2
Supplier: Restek
GRAPHPACK® technology provides a complete system that quickly and reliably makes a leak-tight, low-dead-volume connection. The central component is a metal-jacketed graphite ferrule - the ideal seal for GC applications.
Expand 5 Items
Fitting kits, Swagelok®
Supplier: Restek
This Swagelok® fitting kits includes the most common assortment of ¹/₈" and ¹/₄" brass fittings.
Expand 1 Items
Elbows, aluminum
Supplier: EDWARDS HIGH VACUUM METTLER
Elbows 90°, DN 16 mm, Aluminium
Expand 3 Items
Fingertight capillary column nuts
Supplier: Restek
These fingertight capillary column nuts rapidly tighten without wrenches and can be used with 0,25, 0,32, or 0,53 mm ID columns.
Expand 2 Items
Fittings, Siltek®/Sulfinert® treated, Valco®
Supplier: Restek
Valco®, Zero dead volume tee, Siltek®/Sulfinert® treated, 1/8”, Siltek® treated stainless steel
Expand 4 Items
Capillary column splitter kits
Supplier: Agilent
These splitters are used for splitting an injected sample from a single injector into two columns and on to two detectors.
Expand 3 Items
Reducing pieces for NW flanges
Supplier: EDWARDS HIGH VACUUM METTLER
Reducing pieces made of stainless steel.
Expand 3 Items
Adapter, for reaction vessels
Supplier: HWS LABORTECHNIK
Metal adapter, M 16×1 thread, with A execution, Metal
Expand 8 Items
Injector nut kit
Supplier: Restek
Injector nut kit for Shimadzu 17A, 2010, and 2014 GCs.
Expand 1 Items
Injector/detector plug nuts
Supplier: Restek
These are used to cap off a detector and prevent hydrogen from accidentally diffusing into the oven from an unused detector base.
Expand 1 Items
Fittings for Shimadzu LC systems
Supplier: Agilent
These fittings for Shimadzu HPLC systems provide leak-free connections and prevent the loss of peak shape and resolution.
Expand 7 Items
GC ferrules for Shimadzu
Supplier: Restek
Graphite two-piece construction. For Shimadzu 17A, 2010, and 2014 GCs.
Expand 3 Items
Fittings, secure-fit
Supplier: Restek
Secure-Fit provides a good connection between HPLC components for trouble-free chromatography.
Expand 9 Items
Supplier: EPPENDORF
Supplier: Integra
Supplier: OZ BIOSCIENCES
Supplier: VWR Collection
Supplier: Corning
Supplier: SenseAnywhere
Supplier: Integra
Supplier: NANOENTEK
Supplier: VWR Collection
Supplier: Integra
Supplier: Testo
Supplier: Sartorius
Supplier: SenseAnywhere
Supplier: Quantabio