You searched for: Filter Cartridges

Supplier: Merck

Replacement cartridges for Milli-Q and Milli-RO 3- and 4-bowl style systems are available individually or in convenient ultrapure cartridge kits.

Supplier: ENTEGRIS

Superior retention performance for ultra-clean, point-of-use filtration of photoresist and photochemical solvents.

Supplier: Merck

Filter cartridge, SynergyPak™ III (DI feed)

Supplier: Merck

Filter cartridge, SmartPak™ purification pack for RiOs-DI™ system

Supplier: 3M

Adflo™ particulate and gas filters are replacement, high-efficiency filters designed for use with 3M™ Adflo™ powered air purifying respirators.

Supplier: ILC DOVER

High efficiency particulate air filters are used to support operations where API powders are being processed and there is no gas/vapor threat.

Supplier: Avantor Fluid Handling

A collection to fit a wide range of critical applications.

Supplier: Merck

Filter cartridge, DI-PAK purification pack, large (3,2 l of resin), for Milli-DI™ system

Supplier: ENTEGRIS

Liquid photochemical filters designed for developer, DI water and solvent applications in POU photolithography processes.

Supplier: Sartorius

Sartofluor® GA filter cartridges, manufactured with permanently hydrophobic PTFE membranes, are specially designed for sterile venting and gas applications. Due to their permanent hydrophobicity, they offer the highest process security, even with high volume gas streams, extreme humidity and stringent in-line steam sterilisations.

Supplier: ENTEGRIS

These filters are designed for small to mid volume POU photochemical and solvent filtration needs. They can be used for the hydrophobic filtration of photoresists, thinners and solvents.

Supplier: ENTEGRIS

These point-of-use filters meet small to mid-volume photochemical filtration needs for positive developer and DI water applications. Both Optimizer® DEV filters (for developer applications) and Optimizer® DI filters (for DI water applications) require no pre-wetting, so the filters function immediately after installation. The design also limits the handling of hazardous chemicals during the installation and promotes a healthier workplace. Do not use either filter with aromatic hydrocarbons.

Supplier: Sartorius

Filter cartridge, Type: Analytical kit, arium® pro cartridge set for biological, chemical-analytical

Supplier: ENTEGRIS

Photochemical filter with superior contaminant retention and low hold-up volume performance in sub-10 to 180 nm technology nodes.

Supplier: Sartorius

Arium® mini scientific pack deionisation cartridge faetures top-down-flow technology which is optimised for the removal of both organic and inorganic constituents. The set was designed specifically to match the unit and delivers ultrapure water that exceeds the ASTM Type 1 quality standard.

Supplier: Sartorius

Filter cartridge, arium®, Deionisation cartridge with installation kit, capacity range up to 1400 l @ 20 ºdH, flow rate 600 l/h

Supplier: Sartorius

This is the deionization cartridge set with top-down technology which is optimized for the removal of both organic and inorganic constituents. It is specifically designed to match the unit and delivers ultrapure water which exceeds the ASTM Type 1 quality standard.

Supplier: Merck

SQPAK™ Gard pack

Supplier: Merck

The SQPAK™ RO cartridge produces pure RO water at up to 42 L/h. This cartridge′s RO membrane efficiently removes up to 99% of water contaminants such as bacteria, ions, particulates and organics.

Supplier: Merck

SQPAK™ Final filter ensures high-quality, bacteria- and particulate-free ultrapure (Type 1) water at the point of dispense. The purification technology includes a microfiltration filter that removes bacteria and particulates >0,22 µm.

Supplier: Merck

The SQPAK™ TOC Quanta cartridge produces ultrapure (Type 1) water at 18,2 MΩ·cm resistivity and TOC ≤5 ppb. The cartridge contains IQnano™ ion-exchange media to remove ions down to trace levels and high-grade synthetic activated carbon that targets traces of organic contaminants.

Supplier: Merck

SQPAK™ Quanta cartridge is a high-capacity polishing cartridge that produces ultrapure (Type 1) water at 18,2 MΩ·cm resistivity. The cartridge contains IQnano™ ion-exchange media to remove ions down to trace levels.

Supplier: MACHEREY-NAGEL

These filtration cartridges are used for sample clarification under vacuum (e.g., using the CHROMABOND® vacuum manifold or SPE automation systems) or by gravity. By using CHROMAFIL® filtration cartridges with their specific membranes unwanted particles are removed which can otherwise cause contamination and clogging of sensitive instrumentation.

Supplier: Sartorius

Sartoclean® filter cartridges are cellulose acetate (CA) membrane based prefilters. These filters are optimised for the protection of downstream equipment and Sartobran® CA final filters.

Supplier: Sartorius

Sartovent® is an ideal filter for sterile aeration of tanks. It is entirely made of PP and does not alter the organoleptic properties of the product.

Supplier: Sartorius

Sartolon® filter cartridges are designed for broad chemical compatibility for specific applications in the pharmaceutical and chemical industry. The double-layer design leads to superior filtration performance compared to other nylon membrane filters. Ideal for filtration of a broad range of solvents and solvent-containing liquids.

Supplier: Sartorius

Filter cartridge, Sartobran®, PP, Membrane material: CA, Type: 2-flange bayonet adapter with 226 double O-ring, Pore size: 0,2 µm, Filtration area: 18000 cm²

Supplier: Sartorius

Sartofluor® two filter systems are ideally suited for bioburden reduction and particle removal of highly viscous and difficult to filter pharmaceutical solutions. Due to its hydrophilic PES membrane, the filter offers outstanding total throughputs and flow rate performances. Thus ensuring highest process efficiency, minimised filtration costs and short filtration cycle times.

Supplier: Sartorius

These filters are designed for biopharmaceutical industry from particle removal to bioburden reduction. They offer a defined retention performance by size exclusion.

Supplier: Sartorius

Sartoguard® GF filter elements consist of glass fiber layers and PES membranes. They combine the defined retention performance for particles and microorganisms of membrane filters with the high total throughput capacity in the depth of the fibrous material. They are ideally suited for effective retention of particles, colloids and lipids which block more expensive sterilising grade or Mycoplasma retentive membrane filters quickly.