You searched for: Samplers

Supplier: VWR Collection

Piston sampler, made from chromium plated brass, sterilisable. The end of the tube is sharp for puncturing boxes, bales or bags containing soft pasty material.

Supplier: BURKLE

The collection lance consists of an inner tube and an outer tube. The suction position can be varied steplessly with the outer tube within a height of 0 to 48 cm.

Supplier: BURKLE

Completely made from non spark-producing materials, nickel plated.

Supplier: Avantor Fluid Handling

Simple and safe removal of liquid samples.

Supplier: BURKLE

PharmaPicker is designed for sampling very small quantities of highly potent or active powders for analysis. The smallest sample quantities can be collected with the PharmaPicker.

Supplier: BURKLE

Samplers for viscous, paste-like and semi-liquid substances.

Supplier: BURKLE

Stainless steel construction. Developed for sampling milk powder. The collector is inserted into bags or casks and the sample is removed using a half-shell shaped lance. Insertion depth 385 mm, total length 480 mm, ext.Ø approximately 28 mm.

Supplier: VWR Collection

SAS Super Pinocchio II is a microbial impaction sampler to test the quality of compressed air and gases used in cleanrooms. A compressed air source is connected and the flow meter regulated to achieve the required flow rate.

Supplier: BURKLE

Liquid CupSampler collects liquids of varying viscosity. Media containing particles can also be sampled without difficulty.

Supplier: Hach

These lightweight samplers with low power requirements (12 VDC) have been designed for easy mobility.

Supplier: BURKLE

PharmaDispo disposable powder sampler is a multi-target sampler that takes three separate target point samples with a single sampling.

Supplier: VWR Collection

Environmental monitoring in cleanrooms is important and a critical part of the production chain for a manufacturing company.

Supplier: BURKLE

Disposable ZoneDispo samplers for pourable bulk goods up to 2 mm particle size.

Supplier: BURKLE

Material: V4A stainless steel (1.4404). Sampler for thin to viscous liquids.

Supplier: VWR Collection

SAS Super ISO 100 and SAS Super ISO 180 are differentiated by their airflow; this choice depends on the application, and allows continuous or sequential sampling from a few minutes to several hours. The data can be stored on the SAS instrument itself or on any remote PC.

Supplier: BURKLE

Samplers available in three sizes.

Supplier: NASCO FORT ATKINSON

For collecting liquids, powders, or small solids from a horizontal flowing stream

Supplier: BURKLE

GeoSampler is specially designed for soil sampling.

Supplier: GERBER FUNKE

It is made up of stainless steel with valve for automatic drainage.

Supplier: Merck

The OSHA Versatile Sampler (OVS) is a unique tube design with the adsorbent and filter combined in one tube for collection of both vapors and aerosols.

Supplier: BURKLE

The DispoLance samplers can be used for taking large and small sample quantities quickly and easily, directly from bags.

Supplier: BURKLE

The disposable MicroDispo samplers can be used for pourable bulk goods up to 0,5 mm particle size.

Supplier: BURKLE

Cleaning reusable samplers is a demanding and often complicated task, with greasy, strongly adhesive or toxic substances. An ergonomic handle makes it easier to draw the sample as with a syringe.

Supplier: BURKLE

The scratcher is designed for powders and granules that do not flow freely.

Supplier: Bertin Instruments

Coriolis® μ is a portable biological air sampler for indoor or outdoor air bio-contamination monitoring. The equipment concentrates airborne particles in a liquid sample that can be analysed afterwards using microbiological techniques.

Supplier: BURKLE

Sampler for free flowing bulk goods up to approx. 10 mm diameter. This makes it possible, for example, to remove hazel nuts, blends of tea, grain or similar items from large sacks.

Supplier: Bertin Instruments

Portable dry air sampler for bio contamination control.

Supplier: BURKLE

Very robust sampler for heavy and stony soils. The model with 1000 mm flute length has a conically-tapered 60 cm tip which makes it much easier to extract the driven-in sampler.

Supplier: BURKLE

To make a sampling procedure reproducible, it should always be carried out under the same conditions. For this purpose, the depth stop for samplers is a helpful accessory.

Supplier: VWR Collection

White PTFE ladle.