You searched for: Vials

Supplier: THERMO NATIONAL SCIENTIFIC

Vials feature a 40% larger opening than standard opening vials to reduce needle damage. They are manufactured from superior quality 33 expansion borosilicate clear glass Type 1 and fit most autosamplers that accommodate the 12×32 mm vial format.

Supplier: Merck

Chromatography vial, Headspace crimp neck, 20,00 ml, Glass, Clear, Ø×H: 22,6×75 mm, Round bottom, Non sterile, Cap included: No

Supplier: THERMO NATIONAL SCIENTIFIC

These convenience vial kits contain caps with pre-inserted septa that are not attached to vials.

Supplier: Merck

These certified vial kits are designed, engineered, and manufactured for optimal performance in HPLC, GCMS, and LCMS. The vial, cap, and septa are batch tested to confirm that the quality of each component will be the same, time after time.

Supplier: THERMO NATIONAL SCIENTIFIC

Glass vials are precrimped with an aluminium seal and PTFE/red rubber septum.

Supplier: VWR Collection

These scintillation vials made from borosilicate glass fit all standard counting equipment for liquid scintillation systems.

Supplier: LA PHA PACK

Clear and amber glass vials with a rounded or flat bottom and volumes from 5 to 20 ml and closures. A rounded bottom vial is more sturdy and resistant to high pressure during the heating process. Flat bottom vials are more appropriate for certain instruments.

Supplier: Merck

Chromatography vial, Headspace screw neck, 20,00 ml, Glass, Clear, Ø×H: 22,5×75,5 mm, Round bottom, Non sterile, Cap included: No, Cap size: 18 mm

Supplier: PerkinElmer

This screw top waste and wash vial is manufactured from type I borosilicate glass.

Supplier: THERMO NATIONAL SCIENTIFIC

Chromatography vial, Fire-polished neck, 1,00 ml, PP, Clear, Ø×H: 8×40 mm, Non sterile, Cap included: Yes, Cap size: 8 mm, Cap material: PE

Supplier: MURRAY S

Vials made from neutral glass with PE plug stoppers. Suitable for a wide variety of uses in the laboratory, production, more.

Supplier: VWR Collection

These general-purpose vials with screw cap are made from borosilicate glass. They are available in either a short form or capsule style. The cap on the vial is the same diameter as the body, fitting flush to the shoulder.

Supplier: THERMO NATIONAL SCIENTIFIC

Preferred for use with many carousel tray autosamplers. Glass vials are manufactured from superior quality borosilicate clear glass Type 1.

Supplier: THERMO NATIONAL SCIENTIFIC

These vials are made of superior quality 33 expansion borosilicate clear glass.

Supplier: THERMO NATIONAL SCIENTIFIC

Original Waters™ 4 ml WISP™ autosampler snap/crimp top vials. Superior quality 33 expansion borosilicate clear glass (Type 1, Class A) with flat bottom.

Supplier: Merck

These vials are made of PP with graduations and 9 mm fitting.

Supplier: Hycultec

Glass vials, with screw cap. These vials are suitable for −20 °C deepfreezing. Screw caps with silicone stoppers make sure that the reagents are stored tight and secure.

Supplier: Merck

Autosampler vials are used for chromatography analysis. Several configuration are provided to maintain the sample integrity.

Supplier: MURRAY S

Vials made from neutral glass with PP screw cap. Designed for a wide variety of uses in the laboratory, production, more.

Supplier: MURRAY S

Vials made from neutral glass with snap-on lid. Designed for a wide variety of uses in the laboratory, production, more.

Supplier: Merck

These short thread autosampler vials with 9 mm thread are designed to fit almost all autosamplers.

Supplier: LA PHA PACK

Screw neck vials in clear or amber glass, hydrolytic class 1, for sample storage. A broad range of closed top screw caps are available with different types of septa.

Supplier: METROHM

General use vial, 6,00 ml, Glass, Clear, Ø×H: 22×38 mm, Non sterile, Cap included: No

Supplier: Merck

Autosampler vials are made of Type1 borosilicate glass.

Supplier: BIOCISION

TruCool® leak-proof cryogenic vials feature a screw cap with a thermally-fused gasket to ensure a tight seal. The gasket is a co-molded thermoplastic elastomer (TPE) layer, which prevents leaking, slipping and risk of contamination. The gasket is 95 kPa certified to provide a leak-proof seal. These vials are sterile and individually barcoded with a unique identifier which can be read with common barcode readers. Ideal for use in CoolRack® CF cryogenic vial modules and CoolCell® alcohol-free cell freezing containers. Recommended for use in vapor phase LN₂ only.

Supplier: MURRAY S

These vials without closure are made from neutral glass.

Supplier: Hycultec

Brown glass deepfreeze vials in a PS box with coloured plastic screw caps.

Supplier: THERMO NATIONAL SCIENTIFIC

Thermo Scientific™ national EPA vial convenience kits are designed for discrete water sampling applications.

Supplier: LA PHA PACK

Standard glass or plastic vials for GC and HPLC, micro-inserts, closures and kits. Can be used universally on almost all autosamplers, preferred type of vial for Waters and Agilent.

Supplier: Sterilin

Vial insert, 6,00 ml, PP, Ø×H: 14,5×58 mm, Flat bottom, Non sterile, Cap included: Yes