329 Ergebnisse für: "Purge "

Supplier: Agilent

These are the supplies you need for your Markes Thermal Desorber.

Supplier: Restek

Unleaded gasoline composite standards are comprised of three separate sources each of 87, 89, and 93 octanes blended in equal portions.

Supplier: Restek

These liners can be used with Agilent GCs.

Supplier: Restek

Organic Standard, 3,3'-Dichlorobenzidine, 2000 µg/ml, purge and trap grade methanol, 1 ml/ampoule

Supplier: PEAK SCIENTIFIC

The Precision Nitrogen 600 has been developed to provide a constant and consistent source of nitrogen for detector make-up gas at standard/typical detection levels for GC applications, as well as headspace vial pressurisation, purge and trap, tube conditioning for thermal desorption and sample preparation. These generators are capable of delivering high purity nitrogen, removing oxygen and moisture via Pressure Swing Adsorption and Carbon Molecular Sieve technology.

Supplier: Agilent

Carrier line, packed purged injection port (PPIP), stainless steel, 0,031" int. Ø, 1000 mm

Supplier: Agilent

CrossLab, Liners, SPME or purge and trap, straight, 50 µl, Ext.Ø: 5,0 mm, Ø int.: 0,75 mm, Länge: 95 mm

Supplier: LENZ LABORGLAS GMBH & CO.KG

Duran® borosilicate 3.3 clear glass.

Supplier: VARIAN

Clean gases reduce the risk of column damage and improve accuracy and sensitivity. These unbreakable and self-indicating filters give high sensitivity to oxygen and moisture and can be installed in seconds without tools.

Supplier: Restek

These regulators are the standard for ultra high purity and corrosion resistant pressure regulation. They are more easily purged of atmospheric components compared to brass gas regulators. Stainless steel is especially useful in atmospheres of dry corrosive gases such as hydrogen.

Supplier: EDWARDS HIGH VACUUM METTLER

ATEX RV pumps have an external ATEX classification of Ex II 2G IIC T4 or Ex II 2G IIB T4 and internal ATEX classification Ex II 3G c IIB T4. They are suitable for use in potentially explosive atmospheres such as hazardous area pumping. They are supplied with the gas ballast port which must be fitted with an inert gas purge while pumping flammable gasses or vapours to dilute such gases or vapours below the lower explosive limit.

Supplier: Agilent

These O-rings are equivalent to PerkinElmer ICP-OES O-rings for complete confidence.

Supplier: PerkinElmer

Elemental analyser, Axial view purge extension window

Supplier: PARKER HANNIFIN

For regulating and distributing the clean air output from a Parker compressed air dryer, FT-IR purge gas generator or self contained lab gas generator. Manifold and single flow types are available. Manifold types allow clean gas, at the regulated pressure, into the manifold where independently adjustable flow controls may be set to serve three separate instruments. Single flow types include a pressure regulator and a single flow controller. Each flow controller is equipped with a triple scale pressure gauge for 0 - 7 bar (psig, kg/cm²), a pressure regulator and a flow meter mounted on a convenient bracket for wall or panel mount installations.

Supplier: Agilent

Agilent supplies are equivalent to PerkinElmer ICP-OES supplies for complete confidence.

Supplier: Restek

Liners are used for conversion of ¼" packed injection port.

Supplier: Binder

Drucklufttrockner, geregelt, Für: MKFT 240

Supplier: Agilent

QuickPick purged packed inlet PM kit, with 5 non-stick BTO septa, 1 O-ring, 1 ferrule and 1 disposable glass liner

Supplier: VACUUBRAND

Chemistry diaphragm pumps: Chemistry diaphragm pumps in equipment category 2 (e.g. for Zone 1) with ATEX compliance. These pumps are exceptionally well designed for the avoidance of ignition sources. They have good chemical resistance, are oil-free, have no friction surfaces and the suction chamber is hermetically sealed off from the drive unit compartment. Motor with flameproof enclosure and integrated, self contained overcurrent and overheating protection for direct 230 V/60 Hz single-phase connection. Diaphragm pump heads made of anti-static materials. Chemically resistant: Materials in contact with media; fluorinated plastics, stainless steel, FFKM. Gas ballast with separate inert gas connection. Pressure relief valves inside and at the outlet. Safety membrane technology with the option for inert gas flushing and membrane tear detection.

Supplier: Agilent

Stainless steel capillaries are made of flexible stainless steel (0,6 mm OD) with ¹/₁₆" OD tubing at both ends to accept standard fittings.

Supplier: Restek

Certified reference materials (CRMs) manufactured and QC-tested in ISO-accredited labs satisfy your ISO requirements.

Supplier: PEAK SCIENTIFIC

Designed as a dedicated solution for MP-AES instruments supplying high purity nitrogen for plasma support gas or monochromator purge and dry air supply for POP gas and monochromator air purge, Halo produces 25 L/min of 99,5% or 10 L/min of 99,95% pure nitrogen with a supporting dry air supply of up to 36,5 L/min. Fitted with an oxygen analyser, Halo will alert when operating purity has been reached through a purity status indicating LED light.

Supplier: NABERTHERM

Abzugskamin mit Katalysator (nicht zur Verwendung mit Modellen L(T) 9/14, L(T) 15, L 1/12, LE 1/11 und LE 2/11), Nabertherm

Supplier: LABCONCO

Automatic pressure controller for 230 V units, incl. mounting bracket, hardware, 3/16" ID polyvinyl tubing, 3/32" ID polyvinyl tubing, and power cord, for automatic control of the main chamber pressure, main chamber purging and filling cycles, and transfer chamber evacuation and filling cycles

Supplier: Hach

Shaker which is used for purging of inorganic carbon (TIC). It has an automatic shutoff system. Accommodates eight cuvettes simultaneously.

Supplier: VACUUBRAND

For use in explosive areas chemistry diaphragm pumps category 2 with ATEX conformity are available.

Supplier: Restek

Tubing assembly eliminates the need for the adapter fitting on the static and purge valves.

Supplier: VARIAN

Sparge probe replacement kit, for S/N below 995, hexagonal base

Supplier: Restek

Inlet liners with deactivation improve trace-level analysis that are suitable for agilent GCs equipped with split/splitless inlets. It is made of borosilicate glass.

Supplier: Restek

Use these liners for increased sensitivity. They are manufactured from borosilicate glass or metal.