Supplier: THERMO MATRIX TECHNOLOGIES

Dauerhaft angebrachte, eingelaserte 2D-Barcodes auf dem Boden jedes Röhrchens ermöglichen es Ihnen, Röhrchen ohne sie aus dem Rack zu nehmen sofort zu scannen und zu decodieren und Daten zu den jeweiligen Röhrchen zuzuordnen.

Supplier: LABCONCO

The Basic™ hood is ideal for rooms with ceilings below 2,4 m, 203,2 mm and for shallow countertops with 200 V,50 Hz

Supplier: 3M

For anodizing, composite bonding, and splicing, use 3M™ Polyester Tape 8403. This translucent green tinted tape is coated with a silicone adhesive that bonds well on difficult surfaces, including silicone-coated papers and films. It is chemical resistant and performs under a wide range of temperatures and environments. This tape is a thicker version of 3M™ polyester tape 8402.

Supplier: DuPont

These hoods with integrated mask, model IC689BWH WS, are made of Tyvek®, which is a fabric composed of flash spun high density polyethylene, providing an ideal balance of protection, durability, and comfort. Tyvek® is permeable to both air and water vapour, yet repels water-based liquids and aerosols. It provides an inherent barrier to particles, microorganisms, and non-hazardous light liquid splash.

Supplier: 3M

3M™ Durable Floor Marking Tape 971 is designed to withstand scuffing from general warehouse equipment and traffic typically found in shipping/receiving and storage areas. Its combination of rubber adhesive and thick vinyl backing provides a strong bond to the floor yet promotes one piece, clean removals. The tape is ideal for 5S lean manufacturing initiatives.

Supplier: DuPont

These bouffant caps, model IC729SWH WS, are made of Tyvek®, which is a fabric composed of flash spun high density polyethylene, providing an ideal balance of protection, durability, and comfort. Tyvek® is permeable to both air and water vapour, yet repels water-based liquids and aerosols. It provides an inherent barrier to particles, microorganisms, and non-hazardous light liquid splash.

Supplier: ISOFIELD IRELAND

The Isofield Steridon cleanroom coverall with integrated facemask is aseptically folded and can be donned in 60 seconds or less.

Supplier: Portwest

These Cut level D resistance protective tubular sleeves offer cut and heat resistance for wrist and arm area.

Supplier: DuPont

These sleeves, model IC501BWH WS, are made of Tyvek®, which is a fabric composed of flash spun high density polyethylene, providing an ideal balance of protection, durability, and comfort. Tyvek® is permeable to both air and water vapour, yet repels water-based liquids and aerosols. It provides an inherent barrier to particles, microorganisms, and non-hazardous light liquid splash.

Supplier: DuPont

These overboots, model IC458BWH WS, are made of Tyvek®, which is composed of flash spun high density polyethylene, providing an ideal balance of protection, durability, and comfort. Tyvek® is permeable to both air and water vapour, yet repels water-based liquids and aerosols. It provides an inherent barrier to particles, microorganisms, and non-hazardous light liquid splash.

Supplier: Ansell

Microflex® 93-360 ist ein dünner, chemikalienbeständiger Einweghandschuh für Reinraumumgebungen. Er besteht aus einem innovativen, synthetischen Verbundmaterial (Nitril/Neopren) für robusten chemischen Schutz.

Supplier: NASCO FORT ATKINSON

This Whirl-Pak® Speci-Sponge® environmental surface sampling bag is designed for environmental surface sampling of work areas, equipment, animal carcasses, and any other place where testing for Listeria, Salmonella, E.coli, coliforms, and other foodborne pathogens or anthrax is required.

Supplier: LABCONCO

These glove boxes provides a leak-tight environment to perform work with contamination-sensitive materials under vacuum or in an inert environment.

Supplier: Portwest

These fully dipped nitrile coated gloves with foam nitrile coating in the palm area provides comfort and touch sensitivity. An elastic knit cuff holds it firmly on the arm for enhanced fit. The nitrile coating offers excellent liquid barrier while the superior foam dip ensures excellent grip even in oily environments.

Supplier: Portwest

Diese warme und bequeme Acrylmütze ist mit einer abnehmbaren LED-Frontleuchte ausgestattet, die für eine bessere Sichtbarkeit bei schlechten Lichtverhältnissen sorgt. Diese aufladbare LED kann in einem USB-Anschluss aufgeladen werden.

Supplier: VWR Collection

Dieses leistungsstarke und intuitive Laborwasseraufreinigungssystem stellt aus RO-, destilliertem oder deionisiertem Wasser Typ-1-Reinstwasser her. Die Qualität des Produktwassers erfüllt oder übertrifft CLSI- und CAP-Typ I-Wasserstandards.

Supplier: TEMPSHIELD

These hand-specific gloves protect hands and arms against the hazards of working in and with ultra-cold temperatures down to –196 °C. Lightweight, breathable, and comfortable, they provide protection from liquid splashes and cryogenic temperatures but are not safe for immersion in cryogenic liquids.

Supplier: Thermo Fisher Scientific

Designed to aseptically handle solutions in biopharmaceutical, biotechnology and laboratory liquid transfer applications, these two- and three-ported closures are designed for Thermo Scientific™ Nalgene™ Biotainer™ bottles and carboys. With Animal Derived Component-Free (ADCF) components, including seals that are sonically-welded to the cap, and leak-proof closures, security of high value contents are guaranteed during fluid transfer.

Supplier: Portwest

Maximum cut level five protective tubular sleeve provides cut and heat resistance for wrist and arm area. Thumb hole for secure fit. Machine washable.

Supplier: AB SCIEX

The 3500 Triple Quad system offers productivity, reliability, and robustness in a modernised entry-level mass spec for today’s analytical laboratories. The Triple Quad 3500 system offers the speed and precision you want from a modern mass spec system, with the legendary performance and dependability you trust from SCIEX technology.

Supplier: LABCONCO

This HEPA-filtered glove box has inlet and outlet HEPA filters and provides a leak-tight physical barrier to protect the operator from hazardous airborne particulates and powders.

Supplier: VWR Collection

Dieses kompakte „Plug-and-Play“-Laborwassersystem ist eine ideale Wahl für Anwender, die bis zu 20 Liter Reinstwasser Typ I oder ROWasser (Typ III) pro Tag benötigen. Die Qualität des erzeugten
Reinstwassers erfüllt oder übertrifft die Wassernormen ASTM, CLSI, CAP und ISO Typ I.

Supplier: Avantor Fluid Handling

Erreichen Sie hohen Druck, Genauigkeit und Wiederholgenauigkeit—mit einer intuitiven Touchscreen-Oberfläche.

Supplier: VWR Collection

Dieses leistungsstarke und intuitive Laborwasser-Reinigungssystem macht aus Leitungswasser hochwertiges und konsistentes Reinstwasser vom Typ I und EDI-basiertem Typ II. Die Wasserqualität erfüllt oder übertrifft die Wassernormen ASTM, CLSI, CAP bzw. ISO Typ I.

Supplier: Portwest

The anti-static Modaflame rain multi Norm arc jacket is constructed from high-quality fabrics and trims. Designed to give the highest rated protection combining hi-vis, flame-resistant, chemical-resistant, anti-static, waterproof, and ARC rated properties.

Supplier: Jallatte

Urban sport-style safety shoe incorporating MAXI-Soft Duo™ anti-fatigue technology designed for work stations that require standing for long periods (Upright or sustained activity).

Supplier: Binder

Die Vakuumtrockenschränke der Serie VD für nicht entflammbare Lösungsmittel beeindrucken durch ihre exakte Temperierung und schonende Trocknung. Die Spanneinschubtechnik sorgt dabei für eine optimale Wärmeübertragung. Die Einschübe sind flexibel positionierbar und der Innenraum ist leicht zu reinigen. Die Sicherheits-Vakuumtrockenschränke der Serie VDL garantieren höchste Sicherheit beim Trocknen von entflammbaren organischen Lösungsmitteln und wurden durch eine staatlich anerkannte Prüfstelle auf ihre Sicherheit geprüft (GS-Zeichen). Die VD- und VDL-Geräte sind optional auch als modulares Komplettsystem mit Vakuumpumpe und Pumpenschrank erhältlich.

Supplier: VWR Collection

Dieses Zwei-in-Eins-Laborwassersystem stellt aus Leitungswasser Reinst- (Typ I) und RO-Wasser (Typ III) her. Die Qualität des Reinstwassers erfüllt oder übertrifft ASTM-, CLSI-, CAP-, und ISO-Typ-I-Wasserstandards.

Supplier: Brady

The BradyPrinter i7100 industrial thermal transfer benchtop printer is ideal for customers requiring reliable high volume printing on lots of different materials within the Aerospace, Defence and Mass Transit, Electronics, Automotive, Logistics, Electrical, Voice-Datacom and LAB markets. It guarantees accurate printing on sleeves, tags, labels, tapes, cable markers and much more.

Supplier: Brady

The BradyPrinter i7100 industrial thermal transfer benchtop printer is ideal for customers requiring reliable high volume printing on lots of different materials within the Aerospace, Defence and Mass Transit, Electronics, Automotive, Logistics, Electrical, Voice-Datacom and LAB markets. It guarantees accurate printing on sleeves, tags, labels, tapes, cable markers and much more.