38090 Results for: "Hood C Monashee"

Supplier: ERLAB CAPTAIRE

Accessory for ductless fume hood, Front panel

Supplier: LABCONCO

Solid epoxy dished work surfaces with 6' wide models, inside D×W: 736,6×1828,8mm

Supplier: ERLAB CAPTAIRE

Two plastic hinges

Supplier: LABCONCO

Guardian digitaler Airflow Luftstromwächter, Für: Laborhauben, Protector®

Supplier: LABCONCO

The Basic™ hood is ideal for rooms with ceilings below 2,4 m, 203,2 mm and for shallow countertops with 200 V,50 Hz

Supplier: LABCONCO

The PVC acid digester Protector® laboratory hoods are strong acid resistant. Their liners are made up of unplasticised polyvinyl chloride.

Supplier: KOETTERMANN

LEV arm for ceiling mounting, pipe Ø: 75 mm, aluminium, elox, with transparent PETG round hood and ceiling bracket, 500 mm, Für: Fume hoods

Supplier: LABCONCO

Ductless ventilation systems with glass tops and sides and low profiles are well suited for educational settings. Clean-Sweep air foil and zone-perforated rear baffle maximise containment.

Supplier: Bohlender

Anodized aluminium frame with panels made of polycarbonate.

Supplier: Bel-Art Products, a Part of SP

Scienceware® Clear View fume hoods are suitable for potentially hazardous fumes and dust. It is constructed of polycarbonate with sleek modern style.

Supplier: Heidolph Instruments GmbH & Co.KG

Flat hood

Supplier: asecos

Hazardous material work station, GAP model with robust construction made of chemically resistant, anodised aluminium profiles.

Supplier: LABCONCO

Self-contained ductless enclosures allow safe handling of organic, formaldehyde, acid gas, sulfur compounds, or ammonia chemical fumes and vapors, as well as particulates. Air inside the enclosures passes through carbon filters, and in some cases additional HEPA particulate filters, before being safely exhausted back into the laboratory. No outside ducting is required.

Supplier: Bel-Art Products, a Part of SP

Benchtop fume hood designed for small facilities or installations in which a number of fume hoods are needed, this unit is mainly used in schools, junior colleges and universities.

Supplier: KOETTERMANN

The pharmacy hood is a small hood, which was developed especially for the handling of hazardous substances in pharmacies. It complies with the requirements of section 4 (2) of the German Pharmacies Act and is ideally suited for handling dusty compounds or volatile chemicals. These hoods have been designed for safe handling of chemicals, mineral acids, concentrated and heated acids.

Supplier: Bel-Art Products, a Part of SP

PE hood, clear acrylic window.

Supplier: LABCONCO

Basic Laboratory Hoods are designed specifically for laboratories, classrooms and light duty applications where safe ventilation is required. Constructed of epoxy-coated steel, Basic Hoods are economical and have a smaller overall height and depth than traditional hoods so they fit in areas with low ceilings or narrow aisles.

Supplier: LABCONCO

Solid epoxy work surface, flat, no cupsink cutout, for 30 inch width laboratory hoods, 760×760×30 mm, 39 kg, Für: Laboratory Hoods, Fiberglass 30

Supplier: LABCONCO

The Protector® XStream® benchtop laboratory hoods are chemical resistant, fiberglass reinforced, composite liner and baffle. These are designed for general chemical applications.

Supplier: ERLAB CAPTAIRE

Work surface stainless steel with retention sump

Supplier: VWR Collection

Disposable non-woven hood is made of 20 gsm SPP fabric, and features a small open face hole.

Supplier: LABCONCO

Protector® work stations are specifically designed for the needs of pathologists and histotechnologists. Like a traditional fume hood, these enclosures have a front air foil and rear baffle to direct the inflow air across the work area and away from the operator. Ideal for cramped or crowded labs, protector work stations have a low profile so they fit easily under standard upper cabinets. Designed with a built-in blower which use specially treated carbon filters.

Supplier: ILC DOVER

The Sentinel XT® Clear Full Hood is a superior solution for protection in the pharmaceutical industry when compared to other PAPR masks and facepieces.

Supplier: ERLAB CAPTAIRE

The new Captair® Smart ductless filtering hoods are designed with a simple and innovative way of communication. Smart Technology, simple and intuitive communication by light indicates the status of the hood. A simple light pattern will indicate if the airflow is compromised, if there is a fan failure or in case of a filter breakthrough.
Bitte füllen Sie die Angebotsanfrage aus, damit wir Sie bei der Suche nach dem richtigen Gerät für Ihre Anwendung unterstützen können.
https://at.cmd2.vwr.com/bin/public/fc/main?f=Y5&pimid=17327608

Supplier: VWR Collection

These poypropylene head and face covers are designed to protect users from potential environmental contaminations.

Supplier: BioAir S.p.A.

Additional socket

Supplier: LABCONCO

Organic carbon filters for Protector® work stations with built-in blower, 5,4 kg, 457×914×250 mm

Supplier: LABCONCO

Oval cupsink, PP, 1,5” NPSM thread, mounts in work surface with cupsink cutout, 76×152 mm

Supplier: LABCONCO

The Protector® XL benchtop laboratory hoods offer superior design flexibility. Their panel liners are supplied in three depths to meet individual installation and application requirements. These are suitable for general chemistry applications.

Supplier: HONEYWELL SAFETY

Gridel protective hood is designed to isolate the wearer's respiratory tracs when working in surroundings with suspected or low air borne contamination.