79262 Results for: "Flame Ionization Detector (FID) Supplies"

Supplier: PEAK SCIENTIFIC

The Precision Hydrogen 1200 is the first 1L+ Hydrogen generator and it is designed to produce hydrogen at a flow of 1200 ml with up to 99,9995% purity. Precision 1200 H₂ generator provides the gas needed for detectors requiring Hydrogen fuel gas, such as FID, NPD and SCD, and it can also support GC carrier gases. One generator is capable of supplying multiple detectors, and is available in various flow rates to ideally suit individual customers’ needs.

Supplier: Agilent

Nitrogen Chemiluminescence Detector (NCD) is a nitrogen-specific detector that produces a linear and equimolar response to nitrogen compounds based on a chemiluminescent reaction of NO with ozone.

Supplier: EVOQUA WATER TECHNOLOGIES

In case of leakage, a sensor activates a solenoid valve to shut down the water supply.

Supplier: Agilent

Nitrogen phosphorus detector sample

Supplier: Agilent

Micro flow cell, RFID, 3 mm, 2 μl, 120 bar for G1315C/D, G1365C/D

Supplier: Agilent

Mark 7 Spray Chambers for flame atomisation System. Easy-to-use twist and lock assembly allows for easy cleaning and routine maintenance.

Supplier: USBECK Laborgeräte

This safety burner provides protection against uncontrolled escape of gas in laboratories. If the flame is extinguished, the gas supply is interrupted and no unburnt gas can escape.

Supplier: Agilent

Replacement bulkhead for use with the G4218A ELS detector

Supplier: LUCIDITY

Kompakter, wirtschaftlicher, voll funktionsfähiger Gaschromatograph.

Supplier: Restek

These FID jet removal tool for Agilent 5890/6850/6890/7890 FID.

Supplier: HEATHROW

ABS disposable L-shaped cell spreader with smooth surface that will not tear agar plate or disturb media layer. Supplied sterile for immediate use without flaming.

Supplier: Agilent

PTFE tubing, FEP, 0,7 mm ID, 5 m, Für: G 1321A/B 1100/1200

Supplier: Agilent

CrossLab, For injectors/detectors, column ID 0,32, fitting size 1/16", Ø int.: 0,5 mm, Graphit

Supplier: Greisinger

Monitoring of devices and machines with a water connection.

Supplier: LUCIDITY

GC-FID 16 place autosampler.

Supplier: SHERWOOD SCIENTIFIC INSTRUMENT

Designed to measure up to four elements: Sodium (Na), potassium (K) and calcium (Ca) using air/propane flame.

Supplier: VWR Collection

For most electrophoresis applications, the Basic power supply is ideal. For high current blotting applications, choose the High Current power supply.

Supplier: SHERWOOD SCIENTIFIC INSTRUMENT

Accessories for flame photometers, Für: 410, Gas regulator kit with filter

Supplier: Restek

This Parker HydroGen mate deionising water system is an economical means of providing deionized water to hydrogen generators or for other uses. It removes organics, phosphates, chlorine and essentially all ionizable constituents from water supply.

Supplier: Agilent

Capillaries, non pre-swaged, SS, 250 mm, OD 1,6 mm, ID 0,13 mm, to connect column to detector, Für: UltiMate 3000

Supplier: Merck

n-Heptane für die Gaschromatographie ECD und FID SupraSolv®

Supplier: WARTEWIG

The Flame 100 is ideally suited for all flame related applications in the laboratory. The flame starts immediately at the push of a button; a match or pilot flame is not necessary.

Supplier: ENTEGRIS

1,5” Kapton® wrap, Für: Cynergy Weld-in-Place

Supplier: Cole-Parmer

Accessories for flame photometers, Für: PFP7 and PFP7/C, Air compressor, 110 V/60 Hz

Supplier: SHERWOOD SCIENTIFIC INSTRUMENT

Flame photometers designed for both sodium and potassium to be calibrated, measured and displayed simultaneously. The analytical performance is improved by the use of a lithium internal standard signal, which compensates for fluctuation in flame conditions, drift and dilution errors.

Supplier: PEAK SCIENTIFIC

The Precision Zero Air generators are designed specifically to supply clean, dry, hydrocarbon-free air to be used as flame support gas for GC at both standard and trace detection limits.

Supplier: LUCIDITY

Generator that produces all necessary gasses required to run the Lucidity GC-FID.

Supplier: DUPERTHAL

Sicherheitsschrankzubehör, Flame arrester, short

Supplier: PEAK SCIENTIFIC

The Precision Zero Air generators are designed specifically to supply clean, dry, hydrocarbon-free air to be used as flame support gas for GC at both standard and trace detection limits.

Supplier: KNAUER

The CDD-10-AVP is a highly sensitive conductivity detector applicable to ion chromatography or organic acid analysis. Low noise, low drift and wide dynamic range assure proven performance of the CDD-10AVP detector. A special features is the VP key for validation.